I know the IP of a computer and what software is used to connect to it 10

To ensure that the other party allows, for example, open port 3389 to connect remotely, but also set a username and password for you, you only know an IP and want to connect, is it possible? If so, the world will not be in chaos?

You can use QQ's remote assistance, most people's IPs are not fixed, and they are generally private network addresses, if they are not in the same LAN, they cannot be connected with the remote that comes with Windows.

Start --run --cmd --telnet + the other party's IP address, shutdown -i

If the other party's port 23 is open you do so, if it is not open. Then you don't have a chance.

Generally can not be controlled, you have not implanted the controlled end.

This one. Generally speaking, if the hacker attacks and the other party's machine is XP, then you can try to log in remotely, the username is new or administrator, and the password is empty. If it is not a hacker attack, the accused party can install remote control software.

After the remote assistance can be turned on on the same LAN, click Start --- run --mstsc to enter the IP connection.

When you enter the route, you have to fill in your dial-up Internet account and password, and then keep clicking Next! If you're routing in, your computer needs to be set to a different IP, for example.

You'll need to fill in your ADSL username and password, and then follow the step-by-step prompts.

Select PPPoe in dialing mode, enter the account password into it, OK, @ should also be entered, and the other line should not be connected by mistake.

The line that the cat comes out of is to the router WAN port, and the LAN port is the way to the computer, and each port is marked below!!

Thunderbolt itself comes with Ah.

Each task has a + sign on it.

Just click on it and take a look.

You can see it in Xunlei.

There is a plus sign in front of the dot.

It is true that IPs can be seen, but most of them are fake, because IPs need to be hidden

Everything that needs to be said has been said, and there is nothing more to say......

...It's all answered... Same as above

Hehe! Let me tell you first.

It is illegal to maliciously enter someone else's system.

But if it's a joke.

It's best not to drive it big!

Well, no more talking! Otherwise, I would have become an instigator to sin.

And now the system vulnerabilities are updated quite quickly!

So it's hard to get there!

Pay attention again!

Some hackers are inherently poisonous!

Attention! So if you don't enter someone else's system, you will be hacked!

You give me the IP first.

I teach you.

Once the invasion is successful, then hang up the horse, or leave a back door, it's OK, and then it's your broiler.

Scan the exploit and then use the exploit tool.

Two computers share a fixed IP to access the Internet

1.Preparation: Three network cards, one network cable, and one computer with Internet access.

2.Choose one of the two computers with good performance as the host, and let the host be able to access the Internet.

3.Plug in two network cards on the host, one connected to the external network and the other connected to the other computer.

local connection), small LAN (local connection 2); Configure [Local Connection] so that the host can access the Internet, and then configure [Local Connection 2] as long as the IP address (or (.)

5.Then configure the connection of the other computer, configure the IP (e.g., after the subnet mask, (the default gateway) fill in the IP of the host to connect to the small LAN.

6.(1) After opening "Online Neighbors" on the console, click "Set up a home or small office network" on the left side of the page;

2) "Next" - select "This computer is directly connected to the Internet, and other computers on my network connect to the Internet through this computer";

3) "Computer Description" and "Computer Name" should be filled in by yourself;

4) "Workgroup name" is recommended to fill in workgroup, because it is the same workgroup name as another computer;

5) Select "Enable File and Printer Sharing";

6) Select "Complete the wizard, I don't want to run the wizard on another computer"; Complete, the host configuration is successful.

7.(1) Open the "Online Neighbors" of the client and click "Set Up Home or Small Office Network" on the left side of the page.

2) "Next"—select "Yes" to use the existing shared connection for Internet access to this computer;

3) Computer Description" and "Computer Name" should be filled in by yourself, and "Workgroup Name" is recommended to be filled in workgroup, because it is the same workgroup name as the host;

4) Select "Enable File and Printer Sharing", select "Complete the wizard, I don't want to run the wizard on another computer", and you're done.

You only need to buy a router, if two people go online, a 4-port router is OK, **control at about 100! After facing the router, configure the IP address according to the router's manual to connect the Internet together.

In the icon of the disk you want to share - right-click + - properties - share - shared folder.

If the sharing is successful, double-click - online neighbors - view the working group - double-click the name of the other party's network computer - to see the shared disk icon, and then you can realize file sharing.

The IP assigned to me is.

172200x

So how do I set the IP of these two machines? How to divide into N IPs? What to divide.

With a router, the router routes an IP to N IPs and shares an Internet IP at the same time