Why press the button on the headset of the mobile phone has good sound quality

The sound is good and bad is relative.

There are a lot of mysteries in this, either the sound that sounds good at first glance or the sound quality.

There is too much knowledge in the sound, high frequency makes the sound brighter, and may also make the sound more harsh, and a good treble generator can ensure good hearing resistance under the premise of maintaining high resolution and extending depth of high frequency.

Some sound effects are to adjust the sound by adjusting the intensity of different frequencies of the audio to achieve a certain effect, the most common is to improve the overall dynamic range of the sound by increasing the low and high frequency parts of the sound, so that the sound sounds more layered, but this often also brings distortion and a reduction in hearing resistance.

So, whether the sound is good or not is not the same thing as whether the sound effect is good or not.

Some stereos deliberately let customers listen to the sound of broken glass audition discs, customers listen, the resolution of the sound, clear and crisp, feel very good, and after really buying back, you may be fooled.

So whether the sound is good or not, I think the first thing to consider is the hearing resistance, should not produce hearing fatigue as the premise, if you can't listen to 5 minutes and feel impetuous, then it is not a good sound system, the same is true for headphones.

If you have the opportunity, you can listen to the difference between iPod and other *** sound quality, maybe at first, iPod does not feel good, but what is valuable is that iPod pays attention to sound quality under the premise of ensuring better hearing resistance, so that you can use it for a long time without feeling tired.

Did you plug in your headphones with headsets? That plug is 3 segments, and the extra segment is a microphone. Just get a normal headphone, the kind with a 2-segment plug.

Take the headphone button apart, so that the two parts that are not connected are connected, I don't know which part is exactly, not necessarily the line and the line, generally a certain line and one of the metal parts, there are not many lines, and there are few parts, you can try it out a few times.

The sound is good and bad is relative.

That's the wrong wire!! See if you want to buy a new one or do it yourself!!

Here's <> the reason why the headphones have to hold down the button to make a loud sound:

1. Caused by damage, failure or poor contact of the headphone interface of the mobile phone;

2. The mobile phone interface model does not match the headphone interface model;

3. Caused by damage, malfunction or poor contact of mobile phone earphones;

4. The headset is a keyed headset for mobile phones, and the function is recognized by key actions. The headphone jack does not have a keying function, and only recognizes the direct connection to the earphone.

1. The ground wire and microphone line of the earphone line are opposite, which will lead to this situation. So the phone is recognized by this key switch.

2. The solution is to just pull out the earphone plug some, don't plug it in completely.

3. OMTP is an ear-carrying bumper interface standard with MIC, which is commonly known as the national standard and is used by the state. The pins are connected (from the beginning): Left Channel-Right Channel-Microphone-Ground.

4. There is also a headphone interface with MIC is an international standard, called CTIA, and the pin connection method is: left channel-right channel-ground wire-microphone.

If you need to press the button to hear normal sound while using your headphones, it's because your headphone buttons are malfunctioning or are being used incorrectly. One possibility is that your headphone buttons are damaged or have been miscontacted, causing your headphones to not work properly. You can try testing with a different headset or connecting your headset to a different device to see if it's a problem with the headset itself or the device.

Another possible scenario is that the headphones are closed and your headphones may need to follow specific steps to function properly. You can refer to the instruction manual of the headset to see if there are specific operating steps. Finally, if neither of the above two salutations is the cause of the problem, it may be that your device is malfunctioning.

You can try connecting the headset to another device to test it to see if it's a problem with your device. If the problem persists, it is recommended that you contact the earphone manufacturer or device repair center for testing and repair.

Different mobile phone manufacturers have different functions, and generally have the following functions:

2. As the name suggests, adjust the volume.

4. On the camera interface, click the middle button to take a photo automatically.

5. When calling, press the middle button to answer, press and hold the middle button to refuse to answer, and press the volume button to mute.

6. During the call, click the middle button to hang up, and the increase or decrease of the volume also plays a corresponding role.

Hello, the reason why the sound of the earphone is normal when pressing the button may be because there is a problem with the interface or internal contact of the earphone, resulting in the signal not being able to conduct normally. Holding down the button is equivalent to exerting indirect pressure on the docking point, and sometimes the signal transmission is stabilized, so as to achieve the effect of normal use. In addition, it could also be a configuration issue with your device, you can check if your device's audio settings are correct.

If the problem persists, it is recommended to contact the earphone manufacturer or after-sales service for further mega solutions.

This is due to the fact that this headset of yours is not compatible with your phone!

At present, there are two versions of mobile phone headphones, national standard and non-national standard, such as: Apple and Nokia, which are two headphone versions and are not compatible.

Generally, if it is not compatible, you must press and hold the hang up button in the middle with your hand to make the sound, otherwise the sound is very small or only the background sound.

Headphones (earphones; headphones; head-sets;earpieces) is a pair of conversion unit patterns, which accept the electrical signals sent by the **** device or receiver, and use the speaker close to the ear to convert it into audible sound waves. The headset is generally detachable from the **** device and is connected by a plug. The advantage is that you can listen to the sound alone without affecting the number of circles that affect others; It can also isolate the sound of the surrounding environment, which is useful for people who use it in noisy environments such as recording studios, DJs, travel, sports, etc.

Headphones were originally used for ** and radio, but with the prevalence of portable electronic devices, headphones are mostly used in mobile phones, walkmans, radios, portable video games and digital audio ** devices.

From the perspective of the development of the entire audio industry, wireless headphones are still a new thing, the development time is not long, and it is still in the rising period, user demand is constantly improving, and users' expectations for wireless headphones are also increasing, which is a new test for the industry. At present, users are most concerned about several points including sound quality, battery life and wireless transmission capacity, from the data point of view, wireless transmission capacity can basically meet the needs of the vast majority of users, and sound quality and battery life still have great potential for improvement, if you start from the first two points of the orange to improve, I believe that it will be easy to attract the attention of users in the future.