Comparison table between Chinese and English during POST

This is booting the system from the network card, and after a while it will boot the system from the hard disk, you can go into the BIOS settings to turn off the network card boot.

The level of hardware check during POST (POST): set to "minimal" (default) then POST checks only if the BIOS is upgraded, the memory module is changed, or the previous POST was not completed. Set to "thorough" to perform a full set of hardware checks during POST.

Just fix yourself a few more times.

Is there a **?

After you turn it on, use 360 to fix it and try it.

Including a lot: motherboard CMOS detection (various IO port detection, such as mice, keyboards, etc.), hard disk detection, CPU and its fan detection, motherboard time detection, motherboard voltage detection, motherboard connection monitor detection, motherboard memory detection, motherboard optical drive interface detection, motherboard printer and 1394 and other infrequently used equipment detection, etc., followed by the BIOS system and man-machine operating system work handover....

The above tests are divided into several situations:

1. Serious failures cannot continue: the keyboard is not connected, the CPU is seriously damaged, the hard disk is lost, (the problem of losing system files and not being able to boot cannot be counted as a self-test problem, but it is a serious problem) and so on....

2. For medium problems, you can ignore F1 and continue: the CPU fan is misconnected to the power supply port of the motherboard, the battery voltage of the motherboard is not enough, etc

3. Minor problems, the computer directly ignores them: the hard disk motor is old and regained many times, and you can continue directly, and the hard disk working mode is prompted after changing the motherboard battery, etc

The English that appears is probably included above, which is my own summary, which has practical value....Thank you for adopting....

I don't know what kind of self-test you want.

There are many kinds, and they are not the same.

Add a few ** out...

Go to the motherboard BIOS setting interface and turn off the corresponding self-test.

For the vast majority of Chinese people, learning is a headache, not to mention speaking English, whether you can understand English or not is a problem, but many things on the computer are in English, such as the system BIOS is pure English, in order to facilitate you to understand the computer BIOS, the following is to share the latest BIOS comparison table.

Important key settings, the main option interface is mainly half of the BIOS version information, system information and some hardware information of the computer.

Security settings, the setting interface is mainly used to set related passwords, including administrator passwords, system passwords, hard disk passwords, etc., now we use the win10 system, often say UEFI, GPT and other related terms are also set here.

Start boot settings, the setting interface is mainly used to set the boot order and boot priority, and the U disk system settings that we often say are done in this interface.

Launch settings, when all the BIOS settings are completed, you need to launch the BIOS, there are a variety of exit methods in the interface, you can choose according to your actual situation.

There is a bug in your C drive that needs to be fixed, just wait until the fix is complete. This is caused by the fact that it was not properly shut down last time, and it does not appear again after the repair. If you have it every time you turn it on, it may be that there is something wrong with the hard drive.

Boot self-test, the last shutdown was not normal or there was a problem with the hardware, I was like this some time ago, for a long time, because it needs a comprehensive check little by little. Waited for n long years. Because my computer has been used for a long time, the hard disk has a broken sector, I know it, I don't care about him, and then there is a gadget in 360 to cancel the boot self-test.,Use it and never self-check again.。