That one. Can a friend help? Something went wrong with the computer. You ve helped someone else solv

Please don't steal my answer!!

Plan 1 [New P].

Note [Original]:

1 In safe mode, the effect is even better!

2.All the software to be used below should be installed or upgraded to the latest version to ensure the effectiveness of use.

3.It is not antivirus, and the following methods can be used directly. If the effect is not good, first kill it with a high-quality antivirus software (such as Kaspersky) in safe mode, and it is best to use 360 Security Guard as well, and then use the following methods.

Use 360 Security Guard's "Trojan Horse" - Full Scan". Kill and restart. ）

You don't have to use all of the following methods, you can try them one by one. Sometimes, just the first one works.

One. Close the browser, open the "System Repair" of the new version of 360 Security Guard, scan it, and then click "One-click Repair".

Then use the 360 first aid kit (360 Security Guard's "Function Encyclopedia" is available.) If the 360 security guard is not installed, a separate first aid kit can be installed. Follow the steps:

"Start First Aid" first; After scanning, restart; Then click "System Repair" (you can select all of them to Repair Now". Next, click on "DLL File Recovery", add the missing DLL file that the system detected during detection, and then click "Repair Now". Repair Network is a case-by-case decision to fix or not.

When you're done, you should restart. 】

Two. Scan with 360 Security Guard's "Clean Plugins" to clean up malicious plugins. When you're done, you should restart.

Three. Use Windows Cleanup Assistant (from the web**). After scanning (if you sweep things out, check them all and clean them), then use Fault Repair (select all), and then right-click on the desktop to refresh. Works well in safe mode.

Four. Use Kingsoft First Aid Kit to tick "Extended Scan", after point scanning, if there are items that can be repaired, select all, click "Deal Now", and restart after finishing. 】

Emphasis ---1In the repair, when there is a prompt in Kill Soft or 360, please click Allow. Restart the computer if prompted to restart during operation.

2.When the effect is not good, look at the three points in "Attention". 3.

After that, if the effect is not good, you can also consider system restoration (choose a restore point). 4.If it doesn't work, just find a repair shop or reinstall the system.

I have to say what went wrong.

The C drive is full, right? Clean things up and move them to other plates. It may be that this program is in use.

The C drive is full... Please tidy up the C disk space, simpler, just use 360 to clear the garbage, it is recommended that the desktop do not put too many things, which will affect the operation of the system, and besides, if you reinstall the system, it will be nothing.

Your question, I'll only have two ...

1. It is a program for universal five-pen users to synchronize the thesaurus, and it is estimated that there is a problem with the software. It is recommended that you uninstall it and reinstall the new version of the software.

2. [How to open each link, each new link will pop up a new window] You open the Internet options, find the tab and click in, find "When you encounter a pop-up window", and check "Always open a pop-up window in a new window".

Others. Second, the third question, it is recommended that you use the 360 system first aid kit to diagnose. There is also a browser that can be changed to a 360 speed browser.

0x00422d33 and 0x00000000 are memory addresses, which indicate that the memory cannot be "read". This means that the memory cannot be read, so the memory module cannot be used. If you run out of memory, your computer will run slower, and it's not because of your internet speed or browser.

Just go and figure out the memory module problem.

Always like to load in the same window, and accidentally open it when closing the window.

You can try using a different browser, and if it does, it may be that there is a problem with your Internet Explorer settings.

Use Sogou Browser It's pretty fast.

Handling ideas. Let's take a look at the prompt, "Your PC is experiencing a problem and needs to be restarted, we just collect certain error messages and restart them for you." "The previous system didn't have this feature. It's also a way for Microsoft to collect questions.

And this error message, the system will save the information key in the file as shown below.

If you encounter such a problem, start with the software, open the management software, and disable the software that does not need to be started in the startup items.

Or enter the [mscofnig] command from [Run] to open [Task Manager] and disable the software that does not need to be started in the startup items. If it can't be solved, look down.

If disabling startup items does not solve the problem, then go to [Control Panel] and [Programs and Functions] to uninstall the recently installed software to see if there is a conflict in the installed software. If it doesn't work, then look down.

If that doesn't work, the only way to do this is to reinstall the system. In the end, if the system is installed, it can't be solved. That's the hardware problem.,The hardware problem is the only way to replace it.,There's not much to talk about here.,If you don't get it, it's best to send the computer to a professional repair point.。

1. First of all, we conduct a comprehensive check on the connection between the computer monitor and the host, and plug each connection back to see if there is a connection problem.

2. If the fault still exists, then we need to open the chassis to see if the chassis contains metals and other substances, causing a short circuit in the computer host circuit, and then we smell the computer to see if there is a burning smell, and see if there are damaged components around the motherboard and around the CPU.

3. After checking the whole chassis, there is no abnormality in the chassis, then we will dust the chassis.

4. If it can't be turned on, then use the minimum system method, unplug the data cable of the hard disk, floppy drive, and optical drive, and then check whether the computer can be turned on. Then connect the above devices to the computer one by one, when connecting a certain device, the fault will recur, indicating that the fault is caused by this device, and finally focus on checking this device.

5. If the fault still exists, it is likely to be the fault of the memory card, graphics card, CPU, motherboard, etc., at this time, we only need to plug and unplug these hardware, or replace it again, and try to find the cause one by one.

6. If the memory, graphics card, CPU and other devices are normal, then discharge the BIOS, use the isolation method, place the motherboard outside the chassis, connect the memory, graphics card, CPU, etc. for testing, if the computer can be displayed, then install the motherboard into the chassis for testing until the cause of the fault is found. If the fault persists, you need to return the motherboard to the manufacturer for repair.

The system files are lost, and the system is reinstalled for 20 dollars.

Find a system disk and install it yourself.