I can t get online through the router, and I kneel down and beg all kinds of heroes for help I can t

Error**651 should be the wrong link generated by dialing, if you use the router to surf the Internet, you can directly plug your laptop into the LAN end of the router and you can surf the Internet with those two computers, no need to dial!

1. Connect the network cable (both use a direct connection), and the incoming cat router routes two computers. (Note that the cat router is connected to the WAN port, and the router LAN port is connected to the computer).

2. Enter your land tour. (Take a look at the manual, what is the IP address, username and password of Lu You.) If the manual is gone, check it on the Internet.

For example, the IP of my unit's land tour is Then I enter it in the address bar of IE and then press enter, and the login dialog box will appear, and you can enter the land game by entering the user name and password.

3. Set up your extranet, which is WAN. (The options in different land tours are different, but the basic functions are the same, and you should be able to find them all if you look for them.) Find this option and fill in your adsl account and password in poppe.

4. Set your LAN IP, which is LAN. Or take me as an example,Since my land game's IP is So in order to facilitate my setting of the LAN IP is Of course,If you don't like it, you can change it to something else.,But after changing, you have to change the land game's IP to it.,If I want to set the LAN IP to Then I have to change the land game's IP to.。

Well, now that the LAN IP has been set, if you don't want to do any management to go online, then each computer can access the Internet as long as the network card automatically obtains the IP. If you also want to do some management of the computers in the LAN, then you need to set a fixed LAN IP address for each computer. If the LAN IP is set to then your computer's IP can be set to any number between 2 and 254, and each computer should not be the same, 1 is not your land gamer.

If the LAN IP is set, then the IP of the computer can be set.

First, make sure your router is set up correctly.

1. The problem of setting the IP address of the computer.

1) When connecting to the router to surf the Internet, you need to set the IP address on the computer to be automatically obtained (dynamic IP).

Dynamic IP address configuration of the computer.

2) If the administrator of your network requires a fixed IP address to access the Internet, please fill in the correct IP address, subnet mask, gateway and DNS server address in the local connection.

Second, the computer is connected to the router.

Check it out like this:

2. Reseat the network cable once.

The network cable connected by the cat is connected to the WAN port of the wireless router, and the computer is connected to any LAN port of the wireless router.

3. Turn off the cat and the wireless router and turn them on, and take a look later.

Fourth, if it still doesn't work, set up the wireless router again.

Need to dial up the broadband cat to connect the wireless router and you do it:

Plug in the wireless router, don't pick up the cat first, reset the wireless router (restore the factory), connect the computer to any LAN port of the wireless router, enter the router gateway address in the browser address bar (on the label on the back of the router), enter the settings page, and set it according to the PPPoe (ADSL virtual dialing) method.

Then set the SSID, encryption method, and password. Save, restart.

After setting, connect the network cable from the cat god blind lan port to the WAN port of the wireless router.

2. Reseat the network cable once.

The network cable connected by the cat is connected to the WAN port of the wireless router, and the computer is connected to any LAN port of the wireless router.

3. Turn off the cat and the wireless router and turn them on, and take a look later.

Fourth, if it still doesn't work, set up the wireless router again.

Need to dial up the broadband cat to connect the wireless router and you do it:

Plug in the wireless router, don't pick up the cat first, reset the wireless router (restore the factory), connect the computer to any LAN port of the wireless router, enter the router gateway address in the browser address bar (on the label behind the router), enter the settings page, and set it according to the PPPoe (ADSL virtual dialing) method.

Then set the SSID, encryption method, and password. Save, restart.

After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

You're not a stranger to the mode of teaching, everyone sees...

I don't know what your broadband ** business is, and what is the way to access the Internet, tell these to be corresponding!