Why does the mouse not work well when it is used frequently?

No matter how good the mouse is, there will be problems after a long time, such as the mechanical transmission device of the semi-optical mouse does not rotate well after sticking to the dust, in addition to cleaning the dust of the mouse pad, it is necessary to regularly "clean" the inside of the mouse: flip the mouse over, open the small round cover at the bottom along the counterclockwise direction, take out the rolling ball and wipe it clean with a semi-wet cloth, look inside the mouse, you can see the horizontal and straight rollers and the oblique direction supporting the rollers, wipe off the dust stuck to the rollers with a dry cloth, and reinstall the rolling ball and the small round cover, The mouse will be the same as when I bought it in a new way.

When the mouse moves, the internal rolling ball has to rotate to move the arrow on the screen, and to make the rolling ball rotate, too smooth or too rough desktop is not good, usually the paper hard mouse pad we use is not easy to use, and the cloth mouse pad can make the mouse respond quickly and feel moderate, which is an aspect that users rarely notice.

Dirty mouse hinges that need to be cleaned up. If you can't wipe it off with the above methods, you have to take the mouse apart and clean it.

Do not bend or twist the mouse cable at a small angle to avoid internal breakage, and pay attention to the direction of the connecting cable when using it for a long time. Although the mouse is not afraid of vibration, if it is dropped from a height, it may cause the hinge to shift or the bracket to break. There will always be a day when the micro switch under the mouse button is not sensitive, if you can't buy a suitable replacement, you can also consider replacing the middle button that is not commonly used first.

The mouse looks simple, but it is still a very important peripheral, although the domestic brand machine is slightly thin in configuration, but it is not ambiguous in the mouse, Lenovo computer is equipped with Logitech's OEM mouse, and it has a good performance in feel and life. However, most users who buy compatible machines do not notice the quality of the mouse, you should know that if the Internet is said to be a door to enter the magical world, then the mouse will be the handle on the door!

Do you use a mechanical mouse or an optical mouse?

If it is a mechanical mouse, you should take out the balls in the mouse, and clean the dust on the x-axis and y-axis by hand, and if it is an optical mouse, then try to change a mouse pad to try ......

Is it an optical mouse or a mechanical mouse, if it is an optical mouse, it may be that the mouse pad is not very suitable, if it is a mechanical mouse, it may be that the mouse is dirty inside, just take it out and clean it up.

My wife won't be able to use it for a long time, let alone a mouse.

If you use it for a long time, there is a certain amount of dust stuck in it, and the mat inside is also a little worn, so you can remove the dust and clean it.

No, it won't. Is there a problem with your pad and replace it.

Cause.

1. The battery is dead. Usually the power of the wireless mouse** is the No. 7 battery, when the mouse fails, we have to check whether the mouse battery has power for the first time. In addition, it is necessary to check whether the battery is loose, and whether the metal conductive spring of the battery compartment is rusty and has poor contact, which is also the easiest place for everyone to ignore the problem.

Cause.

Second, the driving problem. Some mice require a specific driver. If the computer system is older and cannot automatically install the general driver, and the mouse needs a manufacturer's special driver, it is likely that the mouse cannot be used due to the lack of drivers.

In addition, you can check whether the driver of the mouse device is normal in the device manager of the computer, there is a yellow exclamation mark indicating that the driver is not normal, if there is an unknown device, it is likely that the driver is missing.

Interface type of wireless mouse: hail

According to the interface type, the mouse can be divided into three types: serial mouse, PS 2 mouse, and bus mouse. The serial mouse is connected to the computer through the serial wheel loose sail line port, and there are two types: 9-pin interface and 25-pin interface. The PS 2 mouse is connected to the computer through a six-pin micro DIN connector, which is very similar to that of the keyboard, and it is important to distinguish it when using it.

The working principle of the mouse: The mouse can be divided into mechanical mouse and optical mouse according to the different working principles. A mechanical mouse is mainly composed of a rolling ball, a roller column, and a grating signal sensor.

The mouse cable (at the exit of the wire) is broken, or the internal circuit of the mouse is damaged.

If the line is broken, it is easier to repair, open the mouse shell, peel the multimeter to measure the on-off of the line, if there is a broken line, cut a section of the mouse line that leads out of the mouse place, and then re-weld it according to the corresponding color, or connect it directly.

Circuit problems are more troublesome, and they are generally not easy to repair and can only be replaced.

Step 1: Remove the mouse case.

Step 2: Find the corresponding micro switch under the shell button in the mouse pants.

Step 3: Remove the micro switch (skip this step if your micro switch is a welding wire) Step 4: Gently pry the micro switch with a word change cone (so you can search for the cause of the fault).

Step 5: Completely sand off the oxide on the metal sheet in the micro switch.

Step 7: Assemble the mouse as is.

Doing so will reduce the possibility of a short circuit, and if the problem has not been solved, it will be a chip-level problem.

This may be due to one of several reasons why the limb strap is sold:

1.Mouse malfunction: It may be that the mouse commese itself is faulty, resulting in the inability to click normally. You can try changing a mouse for testing.

2.Driver issues: If there is a problem with the mouse driver, it can also cause the mouse to not click properly. You can try reinstalling the mouse driver.

3.Software issues: Some software may cause mouse clicks to be invalid, such as some games or applications that may take up mouse click events. You can try to close these software for testing.

4.Viruses or malware: Some viruses or malware may cause the mouse to be unable to click properly, so it is recommended to perform anti-virus or cleanup operations.

5.System issues: Sometimes there is a problem with the operating system that can cause the mouse to not click properly. You can try restarting your computer for testing, or for system repairs.

The maximum possibility is 1, because the movement of the mouse is an optical module, the mouse button is another module, the normal movement means that the mouse power supply is normal, at this time you should pay attention to the feedback of the feeling of clicking to click, generally a relatively crisp sound, clean to the touch, if you feel sticky, it is a key switch problem, if you have experience, replace a mouse micro-touch switch.

This is due to a problem with the mouse control, and the workaround is as follows:

1. First of all, find this computer on the desktop of your computer, and click to open it as below screenshot shown, and then go to the next step.

<>3. Next, click on the device options as shown in the image below, and then proceed to the next step.

4. Then, find the Mouse & Touchpad option on the left side of the window, click to open it as shown in the image below, and then go to the next step.

5. Finally, set the main button of the mouse on the left side, so that there will be no problems with the mouse, as shown in the figure below.