What does it mean to add a few ascending key signatures before the score

A lift mark is a lift mark. "#"This is not a sharp fa, it is called a sharp sign, and it is placed in front of which note will rise which tone - before the do is raised, and before the re is raised, the re is raised.

d"You wrote this wrong, it should be this "b". "b" is called a flat sign, not a flat xi

You want a key signature, a sharp or flat after the treble clef on each line.

A sharp sign is in G major or E minor.

F sharp, major scale is: solaxi

doremi#fa

The natural minor key of so is: mi faso

laxidore

Mi2 sharp is D major or B minor, F and C sharps, and the major scale is Remi Fa

solaxi#do

RE natural minor is: xi dore

mi#fasola

xi3 liters are A major or F minor, F sharps

CG, the major scale is: 6

The natural minor key is:

4 (I used the simple score directly, it was too troublesome to play the roll call).

The 4 liters are E major or C minor, FCG

d, the major key is: 3

The natural minor key is:

5 liters are B major or G minor, FCG

da, major: 7

The natural minor key is:

6 liters are F major or D minor, FCG

DAE, the major key is:

The natural minor key is:

Seven liters are in C major or A minor, and all seven notes are in all sharp and minor keys.

1 flat is F major and D minor, B flat this note, major is: 4b7

The natural minor key is: 2

B72 flats are B flat major and G minor, B flat and E two notes, and B 7b3 major

B7 natural minor is: 5

B7B33 flats are E flat major and C minor, B flat

Ea in major key: B3

B6B7B3 natural minor is: 1

b3b6b7

The 4 flats are A flat major and F minor, bea flat

D, the major key is: B6B7

B2B3B6 in natural minor is: 4

b6b7b2b3

The 5 flats are D flat major and B flat minor, bea flat

DG, in the major key: B2B3

b5b6b7

B2 natural minor is: B7

b2b3b5b6

B76 flats are G flat major and E flat minor, bea flat

DGC, major: B5B6B7

b1b2b3

B5 natural minor is: B3

b5b6b7b1b2b3

The 7 flats are C flat major and A flat minor, and the major and minor keys are all 7 flat notes.

Adding a few ascending key signatures to the front of the score indicates the key range used in the piece, and the key signatures in the score are as follows:

1. G key signature: 4,1,5,2,6,3,7,42, D key signature: 4,1,5,2,6,3,7,4,13, A key signature:

4,1,5,2,6,3,7,4,1,54, F key signature: 7,3,6,2,5,1,4,75, b key signature: 7,3,6,2,5,1,4,7,36, e key signature:

7,3,6,2,5,1,4,7,3,6Extended information: In modern European music theory, the reason why the tonality is expressed by the key signature is that the European concept of the tonality is often grasped by its representation on the keyboard and staves. The same natural seven-tone scale, when the player chooses different rhythms from the twelve rhythms to form different tonal ranges, it is manifested in different key selection methods on the keyboard.

Since the notation of the black keys on the staff is indicated by the addition of a number or B number in front of the note of the white key phoneme, a number of black keys included in the key area are also represented by a number or B number on the staff, and these ascending and descending marks are written at the left end of each line of the staff on the staff, to the right of the clef, which becomes the symbol of the key used in the music.

If there is a reduction mark in a single note in these scores, it is because this note has a sharp and sharp mark in the previous part, so there will be a reduction mark later, do you understand? If you don't have it, you can continue to ask.

Within the range of seven flat key signatures, the last key missing number is the clear horn note in the Qingle key.

It is represented by treble and bass points.

This little dot is known as the most vivid symbol in **. It means raising the basic note by one group, i.e., raising it by a pure octave. Write down the two dots to indicate two ascending tones, i.e. two pure octaves.

If it is placed under the feet below the main cavity of the note, it means lower, and it is called the bass point, which means lowering the basic note by one group, that is, lowering it by one pure octave. Remembering two dots means lowering the cardinal note by two tones, i.e. lowering two pure octaves.

In addition, in the notation, the basic symbol without dots is called the alto.

A flat is in F major or D minor; The two flats are B flat major or G minor; The three flats are E flat major or C minor; The four flats are A flat major or F minor; The five flats are D flat major or B flat minor.

Diacritical marks can be written on lines and in the intervals of staffs; It can be written in front of a note and after a clef. The diacritical mark that is written after the clef is called a key signature. Until the new key is changed, it takes effect for all homonyms in the sequence.

If you want to change the key signature in the middle of a song, there are three possible scenarios.

If the key signature change occurs at the beginning of a line of score, the key signature to be replaced should be written clearly at the end of the previous line of score, and the last bar line should be moved forward so that the key signature of the new key can be written.

A flat is in F major or D minor.

The arrangement of the major key is all full, half, all full, half, a flat is b, and after the flat is b, the scale is f, g, a, bb, c, d, and e just in line with the major mode, and the main note is f, so it is called f major.

The same goes for minor.

The two sharps before the staff are D major (f, c).

A sharp sign (f) is in the key of G.

The two sharp signs (f, c) are in the key of d.

The three sharp signs (f, c, g) are in the key of A.

The four sharp signs (f, c, g, d) are in the key of E.

Five sharp signs (f, c, g, d, a) are in the key of B, and six sharp signs (f, c, g, d, a, e) are in the key of F, and seven sharp signs (f, c, g, d, a, e, b) are in the key of C.

The 3 sharp signs represent f, c, and g, which is A major (or F minor).

The sharps are 4152637 sharps (fa, do, sol, re, la, mi, si), i.e. one sharp 4 (fa) and two sharps 4 (fa) and 1 (do).

The flat sign is exactly the same as the reverse 7362514 of the brigade, one flat is 7 tones, and the two flats are 7 and 3 tones.

On the piano, except for the C major scale, all the original notes are white keys, and most of the notes need to be black keys for rising or falling, and the rise and fall of other tuning notes are not necessarily on the black keys. In fact, even in C major, the rise and fall of notes are not all on the black keys, for example, the 3 and 7 liters fall on the white keys next to them. Similarly, drop 4 and drop 1 are on the white key next to them.

Therefore, it is necessary to distinguish whether the sharp-rise sign is on the black or white key, and also depends on the position of the note that needs to rise and fall on the keyboard. To put it simply, play the key immediately adjacent to the right of any note that needs to rise, and the key immediately adjacent to the left of any note that needs to fall (catching up with the white key is the white key, and catching up with the black key is the black key).

Sharp, flat, rising, flat, and reducing are all diacritical marks on the staff, which are signs that indicate the increase, lowering, or reverting of the tone.

The 1 sharp notation ( ) indicates that the pitch of the basic scale is raised by a semitone;

For example: f rises by a semitone; C raises semitone to c. A rising g semitone is a rising g and so on.

2 Flat sign (b): indicates lowering the pitch of the basic scale by a semitone;

For example: B lowers a semitone is B flat; Reducing the semitone of e is falling e; A lowering a semitone is a flat a; Wait a minute.

The 3-sharp mark ( ) indicates that the pitch of the basic scale is raised by two semitones (one whole tone);

For example, if e rises in the whole tone, it is a heavy rise in e; Raising the whole tone of g is raising g again; Wait a minute.

4 Flat Drop (BB): Indicates that the pitch of the basic scale is lowered by two semitones (one whole tone);

For example: f lowering the whole tone is emphasizing f flat; b lowers the whole tone is a heavy drop b; Wait a minute.

5 The reduction mark ( ) indicates the restoration of a tone that has been raised (including re-ascending) or decreasing (including re-descending).

For example, after the reduction of B is the restoration of B (i.e., B); After the reduction of F is the reduction of F (i.e. F) and so on.

When a tone is restored, whether it is raised (or lowered) whole tone or semitone, the tone is reduced to the time when it is neither rising nor falling (i.e., it is reduced to the original sound of that tone).

Sharp: 4 1 5 2 6 3 7

Flat: 7 3 6 2 5 1 4

Take major as an example, a sharp sign is 4 sharp for G major, two is 4 sharp, 1 is D major, and so on, the law is to add a major second to the last sharp note to determine its major mode.

For example, 4 flats 7 3 6 2 are A flat major 5 3 6 2 is D flat major, that is, look at the first note of the last flat note.

After lifting, on the piano, it starts with the dominant note of that key, for example, F major in B flat, which starts with f, and when you encounter b, you can press B flat.

On the piano, for example, the sharp sign of 2 is the black key between 2 and 3, the flat sign of 3 is also this black key, and the sharp sign of 3 is the 4, can you understand? I understand, but it's hard to express.