You can search but you can t get on the Internet, you can go online but you can t use search engines

As long as the router is connected to the power supply, there is a wireless signal transmission, and the wireless signal can also be connected normally, but it needs to be set to go online only after the Internet environment is successfully set, and the specific setting method is as follows:

1. Line connection:

a.Connect the network cable from the cat to the router (WAN port), and then connect the network cable connected to the computer to the router (any port numbered 1, 2, 3, 4).

b.Connect the broadband cable to the router (WAN port), and then connect the network cable connected to the computer to the router (any port numbered 1 2 3 4).

2. Log in to the router interface.

In the browser, type: Enter, enter in the pop-up page: admin and click "OK".

3. Set up the router to surf the Internet.

Before setting up the Internet access, choose the correct Internet access method: Generally, there are three types as follows:

ADSL dial-up: Usually to access the Internet (when not connected to the router) need to click on the broadband connection, dial-up is successful before you can access the Internet, you should choose the Internet mode, Internet access and Internet password correctly enter the broadband and password, you can.

Automatically obtain an IP address: If you usually surf the Internet (when you are not connected to the router), you only need to set the local connection of the computer to automatically obtain the IP address to access the Internet, you should choose this Internet access method.

Static IP: If you need to fill in a fixed IP address in the local connection to access the Internet (when you are not connected to the router), you should choose the Internet access method, log in to the interface of the router, click "Advanced Settings" - "WAN Port Settings" to select the static IP mode "Static IP Mode", and enter your fixed IP address, subnet mask, gateway, DNS domain name server and other parameters correctly.

4. After setting, click "Advanced Settings" - "System Status" to check whether the connection status of the WAN port shows that it is connected, and whether the corresponding connection mode is displayed correctly.

The corresponding connection mode for ADSL dial-up is: PPPoE

The connection mode corresponding to the static IP address is the static IP address

Hello,My product has a password,Lock the MAC,And change the SSID from time to time,I allow you to find my product,But just let you see that I can surf the Internet,I'm sorry,Just the bandwidth is occupied,You just search and cherish it。

The browser has been maliciously modified、When the IE browser shed itself fails,Naturally, the shadow chain will only sound to browse; Or if the IE is maliciously modified, it will also lead to the inability to browse the web. How to troubleshoot1Browser problems, it may be too much browser cache, or malicious modification of the browser, solution 1

We can empty the cache and restore the initialization. See if it works. 2.

At present, the more common way to modify the homepage of the browsing software is to modify the homepage by modifying the registry value. Through this feature, we can reverse find out which program modified the registry value, locate the software, and uninstall it to sit back and relax.

Summary. If the wifi (wireless router) is on, but the wifi signal cannot be found, it may be caused by the hidden wifi name, or other configuration parameters of the wifi are problematic. 1.

If you don't have a computer, and all your wireless devices such as mobile phones, you can't search for a wifi signal at home. In this case, you can restore your wifi router to factory settings, and then use your mobile phone to reset the router to surf the Internet, reset the wifi name and password, and you can use it normally after completing the configuration. 2.

If you have a computer, connect the computer to the WiFi router with a network cable, and then log in to the router's settings page with the computer.

Hello, glad to answer for you! The reasons why you can't search the network are dry: 1. The wireless network card switch is turned off and the macro is infiltrated; 2. Some programs will shield the network card driver when they are applied, causing the network card to fail; 3. The wireless network card driver is damaged; 4. There are bingdu Trojans and so on in the computer.

If the wifi (wireless router) is on, but the wifi signal cannot be found, it may be caused by the hidden wifi name, or other configuration parameters of the wifi are problematic. 1.If you don't have a computer, and all your wireless devices such as mobile phones, you can't search for a wifi signal at home.

In this case, you can restore your wifi router to factory settings, and then use your mobile phone to reset the router to surf the Internet, reset the wifi name and password, and return it to the configuration and it can be used normally. 2.If you have a computer, connect the computer to the wifi router with a network cable, and then log in to the router's settings page with the computer.

Summary. Hello, 1 forgot to turn on the laptop's wireless network card or the wireless switch was artificially turned off. 2.There is a problem with the setup of the wireless router. 3.No Wi-Fi is turned on.

Hello, 1 forgot to turn on the laptop's wireless network card or the wireless switch was artificially turned off. 2.There is a problem with the setup of the wireless router. 3.No Wi-Fi is turned on.

Once you're done, you can restart your computer, which is often caused by a system problem.

Hello, your home network, the router can be restarted.

Computers can't.

You see that the wireless network card is disabled, and you are experiencing this problem because the computer's wireless network is disabled. Open the settings screen and tap Network & Internet.

Is this it, and then you have to take a look at your own system, and it is better to update the system.

I got it, but it still doesn't work.

Whether your computer has a wireless network card and whether there is wireless coverage around your computer.

If it still can't be solved, it is recommended that you uninstall and reinstall the wireless card driver or restore or reinstall the system after backing up the data.

There should be no network card.

Problems with computer configuration can easily lead to the problem of not being able to find the network.

It is recommended that you can't find the Internet today, you can try to turn him off for a day.

Search again tomorrow, and if you haven't already, we recommend that you reinstall the system.

1. Check your settings to see if your mobile network is turned on, if it is turned off, it will definitely not be connected, you have to turn it on.

2. In some places, the signal is not good, or there are some shielding devices in some specific places such as important conference rooms, so you have to stay away from them.

3. Some mobile phones are dedicated mobile phones, such as mobile mobile phones, if you use the number of Unicom, it must be that the network signal is not good, and it is basically not connected.

4. If you don't understand whether your settings are correct, you can use the settings in your phone to restore all the settings.

5. If the mobile phone is in arrears, of course, it will not be able to connect, and the mobile data traffic will be charged when the gift is used up.

6. Then there is the replacement of high-quality mobile phones, and the current electronic products are updated quickly, you have to keep up with the development of the times and replace new products in time.

The computer wireless network can't be searched, just open these options.

Question? Positioning.

Answer: Because your mobile phone can't receive the network signal, it is likely to be a problem with the operator's signal module, or it may be a problem with the mobile phone system, so turn off and restart it first, if not, then call ** to the operator to see if it is a problem with the signal card, if it is not a signal card, it is likely to be a problem with the mobile phone signal module.

Positioning is also related to the positioning module, positioning mainly depends on GPS, if the mobile phone has been dropped in the past and is too hot, it is very likely to burn out the GPS, so it will lead to inability to position, and even positioning is not accurate.

It's okay to ask questions in the early morning.

Is it sudden?

It's not okay to ask questions.

It is recommended that you re-establish your broadband connection

Right-click the "Network" icon on the desktop, click "Properties", and select "Set a new connection or network".

Select "Connect to the Internet";

Select "Broadband (PPPoE)(R)";

Enter the mobile broadband customer name and password, and the connection name is arbitrary; It is recommended that customers select "Remember this password" to facilitate the next login; Select "Allow others to use this connection" so that customers with other domains on this computer can also use the connection to surf the Internet.