ASUS X42 Laptop Keyboard Unlocked

Hello, dear ASUS users.

If you need to disable the keypad function, we recommend that you use the FN+NUM LK key to disable the keypad.

Method. 1. Press the numlock key when entering the password in the login window after booting, so that the num lock indicator lights up, and then choose to restart there without logging in, then windows will automatically remember that the num lock indicator is always on when logging in. This is the memory function of Windows, on the contrary, the last time it was off, then the numeric keypad light will be off after the next startup.

Note: If your machine uses optimization software such as Optimizer, Super Rabbit, etc., to let it log in automatically, then the machine will not stop at the login window interface, then either cancel the automatic login, or set a password first. Then follow the above operation and cancel the password.

Method. 2. Enter regedit in the "Start"->Run" box to open the registry, and find it in turn.

hkey_users\.default\control panel\keyboard

There are initialkeyboardindicators on the right, just change its value to 2. (so that the boot will not lock automatically).

Press and hold the fn in the bottom left corner of the keyboard, and then press the numlk in the upper right corner to unlock, oh.

Here's how to remove the keyboard from an ASUS notebook:

1. First of all, remove the battery of the laptop, and then disassemble the back cover of the laptop;

2. After removing the back cover, remove the screws that fix the keyboard. So, how do you know which screws are fixed on the keyboard, in fact, it is not difficult, there is an icon of the keyboard next to the screws that fix the keyboard;

3. For example, this notebook has a total of three screws to fix the keyboard, two near the middle (see the figure in the previous step), and one near the CPU (see the figure below), and these screws are black after being screwed out;

4. After all the keyboard fixing screws are screwed out, turn the notebook over and pry the keyboard open from the keyboard surface with a hard plastic sheet;

5. When priing open the key volt liquidation surface, please note that the main obstacle is below, because there are four shrapnel under the keyboard to block the keyboard from taking out before the lack of celery;

6. In addition, do not use force, because although the screw is removed, there is a data cable connected to the motherboard behind the keyboard. Similarly, you can combine the back view of the detached keyboard;

7. Wait until all sides are loosened, shake the keyboard left and right, and the keyboard can be removed. After removing the keyboard, if you want to completely separate the keyboard from the computer, you can unplug the cable from the computer again.

Dear ASUS users, you can disassemble it according to the method shown below.

On closer inspection, there are four snaps on the upper part of the keyboard, which are picked open with a blade.

Dear ASUS users, Hello Shengzhi!

Use the positive source fn num lk to lock and toggle. As noisy Qingmin as shown below:

Different brands have different ways to turn on and off the keypad, and generally the way to open the pants is to press the fn key first, and then press num lk at the same time.

You can also type: osk on the fly, press the enter key to open the on-screen keyboard, and set it accordingly.

On-screen keyboard options If you want to open the digital brigade keyboard, check OK before bending and upgrading the digital keypad.

References How to switch keypads.

Step 1: Preparation.

Prepare the tools (fine Phillips screwdriver, flathead screwdriver, tweezers, blade, soft cloth) and the notebook to be disassembled.

Step 2: Remove the battery.

With the back of the laptop facing up, open the battery's retention latch and remove the battery.

Step 3: Remove the back guard.

Disassemble the fixing screws of the two guards on the back of the notebook and remove the guards.

Step 4: Remove the hard drive.

Unplug the hard disk cable and take out the hard disk.

Step 5: Disassemble the NIC.

Gently pull out the network card from the data slot, gently pry open the metal clip of the power cord, and take the network card out.

Step 6: Remove the buckle bar.

With the notebook facing up and the LCD screen on, gently pry open the upper buckle bar of the keyboard and turn it up, and then open the cable connected to the motherboard and take out the buckle.

Step 7: Disassemble the keyboard.

Gently pry the keyboard open and flip it up (be careful not to tear off the cable underneath), disassemble the cable, and remove the keyboard.

Step 8: Disassemble the LCD screen.

Disassemble the two cables between the LCD screen and the motherboard, including power and data, unscrew the display fixing screws, and take the display screen.

Step 9: Disassemble the touchpad.

Gently disassemble the cable connecting the touchpad from the motherboard and remove the main case of the touchpad.

Step 10: Disassemble the optical drive, etc.

Remove the fixing screws and remove the optical drive, heatsink and fan on the back.

Step 11: Disassemble the motherboard.

Unplug the sockets of the cable and the next cable, and then pay attention to the cable below when removing the motherboard, and remove the motherboard and accessories.

Step 12: Disassemble the memory.

Gently push the memory module to the sides to secure the metal clip, the memory module will pop up, and then pull out the memory module.

Step 13: Disassemble the CPU

Release the metal clip of the CPU and pull out the CPU.

At this point, the laptop is disassembled.

Hello, dear ASUS users.

If your FN+F9 cannot lock the touchpad of your fibre cooktop, it is recommended that you follow the steps below to solve the problem:

1.Uninstall your ATK driver and touchpad driver and restart your computer.

2.Reinstall your ATK driver and touchpad driver, install the order to ruin the spring dress up is ATK first and then touchpad driver.

3.Restart your laptop again and confirm if FN+F9 can lock your touchpad.

How to turn off the touchpad on the ASUS X44H:

Method 1: Use the shortcut on the keyboard to turn off the touchpad.

On most computersF9There is a small rectangular box,At the bottom, it is divided into two boxes, one large and one small, with a line,Finally, the whole large square box is crossed out with a diagonal line to tease the small Fu Qiao Lu number,Press the fn+button with this symbol will turn off the touchpad。 There are also some computers listed on the F8 or others, and some of them need to be manually turned off by themselves if they don't have this one.

Method 2: Open the control panel, because the touchpad controls the mouse, so find the mouse option in the control panel and click the mouse.

In the open mouse properties, there is a device setting value option, select the device settings column, find a touchpad, disable it.

After the disabling is successful, click on the app and you will find that the Touch Mountain Complex template cannot be used.

If you want to turn it on, click on it, and click on the app directly after the activation is successful.

fn plus the top row of keys with a lock marker.

Dear ASUS users, Hello :

Seek technical support, and finally, I wish you all the best in your work and a happy life.