Computer system failure, computer system failure? Distress! Thank you.

Have you changed anything recently, such as drivers, or installed any software?

1. Restart the computer, press F8, and the selection menu will appear.

2. Select the last correct configuration, try the safe mode, if you can enter the safe mode, you can uninstall the recently installed software or driver.

3. If this is still the case, you can only redo the system.

Right-click on My "Computer" --Properties --Advanced --Startup & Recovery "Settings" --Default OS drop-down list: Choose your operating system to try!

It's a computer system problem and a motherboard battery problem, the windows default value is because the motherboard battery is out of power, and the constant reboot is because the computer has not updated the system for too long, my suggestion is to change a motherboard battery that matches the original brand, reset the BIOS, and the problem can be solved after reinstalling the system.

It should be that the system is broken, if there is nothing very important, it is recommended to reinstall the system, which is the fastest and most effective way to fix it.

When selecting the control system, click F8, enter safe mode, and then...

And then what? You didn't tell me what your system is, win7?winxp?

Try to replace the power battery first, if it doesn't work, the parts of the machine itself are loose or the chip is damaged by virtual soldering, common reasons: the memory is loose or there is a problem with the memory itself, reinsert the memory or change the memory to try.

1. Go to PE or pure DOS to check the situation of your hard disk.

There should be a tool in the starting program in PE, and use the partition tool to view it under pure DOS) 2. Use fdisk to check your partition table information, if it is corrupted, modify it 3. Try to restore the system in PE.

4. If it can be recovered, a full anti-virus will be carried out.

5. If the recovery system fails, remove your hard disk to another computer, use EasyRecovery Pro software to see if you can recover the hard disk data, and then copy the other out and save it, and then repartition it to make the system.

If your data is not in the C drive, you can reinstall the system and reinstall it only to format the C drive.

If your desktop also has your important information, it depends on your situation, are you not responding at all when you turn it on? The question should be detailed.

It may be that the hard disk partition table is damaged due to a sudden power failure, and if you can still see the C drive, you will reinstall the system number.

If there is nothing on the C drive, it means that your computer is poisoned. If it can be opened, it means that your D drive is damaged, then you need to fix it with the next hard drive data recovery software.

Take your hard drive off and put it on somebody's machine and read OK

Have you done a one-click backup before? Without backup, you can only reinstall.

1.This problem is very simple, you lack the required files of the system for the game, and this problem will arise This prompt situation is: Windows XP system; Software includes:

Very new versions of Windows Live Writer 2009, Windows Messenger 2009, Firefox etc.

After this prompt appears, click OK and it will not affect the use of the program. The reason for this problem is actually Microsoft's own problem. It's a legacy of Microsoft's Vista.

In the Vista system, there is a very cool feature, which is "program thumbnails", which has a bit of a 3D effect, and this function calls this library, and it references the except Handler4 common function in .

However, in the XP system, the version that comes with the system is different from that in Vista and does not have this Except Handler4 Common, and as a result, the error message "Unable to locate the program input point except Handler4 Common on the dynamic link library" when starting the program.

Workaround: Add C: Windows System32 under .

Change the name, e.g. to .

2.You can only reinstall the system.

If you have made a backup, press F11 to restore it.

Solution 1: Excessive overclocking of the computer causes the computer to screen up.

The reason for the blue screen phenomenon can be explained from both soft and hard aspects. On the hardware side, overclocking is a major cause of blue screens. Overclocking, due to overload calculations, resulting in too many internal operations, which overheats the CPU, resulting in system calculation errors.

If you want to overclock and don't want a blue screen, you can only do a good job of heat dissipation measures, change to a powerful fan, and add some heat dissipation materials such as silicone. In addition, overclocking in moderation or not overclocking at all is also one of the solutions. Whether you want to be stable or faster is up to you.

However, for most friends, overclocking is generally not carried out, so this point is not practical for most friends.

Overclocking your computer causes a blue screen on your computer.

Solution 2: Poor memory module contact or memory damage causes the computer to blue screen.

In actual work, the computer blue screen phenomenon that the author encounters the most is the poor contact of the memory module (mainly caused by too much dust inside the computer, which often occurs in old computers) and the computer blue screen caused by hard disk failure. Of course, when the computer memory module fails, the computer blue screen phenomenon will also occur.

Solution: Since most of the blue screen failures caused by memory are caused by too much internal dust or poor contact, the solution is also very simple, you only need to open the computer case, pull out the memory module, clean the lower slot and clean the gold finger of the memory module and then install it back, and the general problem can be solved. If the problem is not resolved, it is determined that it is a memory failure, and replacing the memory module can resolve the issue.

Poor contact of memory modules or memory corruption causes a blue screen on your computer.

Solution 3: The hard disk fails and the computer is blue screen.

Problems with the hard disk often lead to the blue screen of the computer, such as the bad sectors of the hard disk, the computer reading data error leads to the blue screen phenomenon, because the hard disk and the memory, carry some data access operations, if the access to read the system file is located in the area of the bad sector, it will also cause the system to fail to operate normally, resulting in a system crash, resulting in the computer blue screen.

Solution: Detect the bad sectors of the hard disk, if there are a large number of bad sectors on the hard disk, it is recommended to replace the hard disk with backup data. If it is less bad, it is recommended to back up the data, reformat the partitioned disk, and friends who understand computer hard disks can also isolate the bad to the hard disk area. Reinstalling the system afterwards will resolve the issue.

A hard drive failure causes the computer to blue screen.

Solution 4: The installed software does not cause a blue screen on the computer.

If the computer starts to use well, one day after installing a certain software, there are frequent computer blue screen failures, this kind of problem is mostly software incompatibility, but this kind of computer software incompatibility generally rarely occurs.

Solution: If you are sure that the computer is used well before the start, and the computer blue screen failure often occurs after installing a certain software, then you can try to uninstall the software installed later, if the problem is generally solved by the computer blue screen caused by software incompatibility, if the problem is not solved, it may be caused by other reasons computer blue screen.

2. Next, select the system that needs to be installed.

5. After the installation is completed, enter the system desktop, and the original faults of the system are solved.

The problem is so serious, redo the system, BIOS set it up:

When inserting a system disc into the optical drive, press the delete key until the CMOS interface comes out - select Advanced

biosfeatures---fiirst

Bootdevice--- select CDROM--- press F10 (Save) -- press Enter (exit) -- restart --- read the disc interface.

After a few minutes of installing the first partition, the system will restart --- automatically continue the installation until --- desktop is available.

I'm not a master.,Although reinstalling the system can solve n more problems.,The general reply can't let the system be reinstalled.,It's just my computer.,I'm afraid I'm going to reinstall the system too.。 Passing by ......