iphone5ssiri no sound what s going on

Updated on number 2024-04-02
19 answers
  1. Anonymous users2024-02-07

    Siri can't hear you, and it has nothing to do with setting privacy permissions, hard reboots, etc.

    The microphone next to the front camera is broken. The only explanation.

  2. Anonymous users2024-02-06

    There are four main reasons why the Apple 5S phone has no sound, which are as follows:

    1. The speaker of the mobile phone is blocked or damaged.

    Solution: Clean the hole of the mobile phone speaker or ask a professional to replace the mobile phone speaker.

    2. The handset of the mobile phone is damaged.

    Solution: Ask a professional to replace the handset of your mobile phone. Lee socks.

    3. Mobile phone users inadvertently turn on "silent" mode or "Do Not Disturb" mode.

    Solution: Turn off your phone's "Silent" mode or "Do Not Disturb" mode.

    4. What is the excitement of the mobile phone system failure?

    Solution: Restore your phone to factory settings after backing up your phone data.

  3. Anonymous users2024-02-05

    iPhone 5S suddenly No Sound The solution is as follows:

    1. Symptoms: During a call or when using your iPhone's built-in speakers, you may experience no sound or your voice may be distorted, unclear, static, or crackling.

    When adjusting the volume in Control Center.

    2. Solution:

    iPhone 5S and later

    iPhone 4 and 4S:

    iPhone 3GS and earlier:

  4. Anonymous users2024-02-04

    Workaround:

    1. Check whether it is in headphone mode, it may be that the system does not recognize it after unplugging the earphone, just restart the phone.

    2. Check whether the silent mode is enabled. If it's on, turn it off.

    3. The charging interface is short-circuited, and the alcohol wipes the interface.

    4. If the above inspection cannot solve the possible damage to the speaker, you can go to the local Apple repair point for maintenance, and if it is not out of warranty, it can be replaced free of charge.

  5. Anonymous users2024-02-03

    The answer may be to turn on [Silent Mode], tap [Auxiliary White Dot], turn on [Device], tap [Unmute], or push the left button of the phone up, and it will prompt [Turn off mute]; If it is not a problem with mute, you can [restore all settings], if the above methods cannot solve the problem, it may be a hardware failure, and you need to send the phone to after-sales service.

    Question: How to copy Apple 5s**?

    5. Next click on the "Next" button to continue.

    6. By default, each ** is selected. If there is a ** that you don't want to import when viewing, remove the small tick in the upper left corner.

    Ask a question like this: How do you get it?

    How do you get a question like this?

    4. Click Import.

  6. Anonymous users2024-02-02

    No sound could be a setup issue, suggest a few actions:

    1. Find the "Settings" icon on the home screen of your iPhone5 first, and tap to open it.

    2.Find the "Sound" option in the settings list and click to enter.

    3.Find the "Lock Sound" option in the list of sound settings.

    4.Then turn the "lock sound" off and back on. Then try pressing the power lock button on your iPhone to see if there is a lock sound.

    5.If you turn off the button sound in the settings and turn it back on, there is still no sound. Next, please press and hold the "Power Lock Button" on the top of your iPhone until the sliding shutdown screen appears, and then slide to shut down.

    6.Wait until the shutdown is successful, then press the "Power Lock Button" on the top of the iPhone to turn it back on, and finally try to lock the screen to confirm whether there is a sound.

    7. If the above steps cannot be solved, it is recommended to go to after-sales service for maintenance, which may be a hardware failure.

  7. Anonymous users2024-02-01

    1. The phone is silent, and the switch on the upper left side of the phone can be turned on.

    2. The speaker of the mobile phone is broken.

    3. The speaker cannot make a sound due to water entering the mobile phone.

    4. The mobile phone has fallen and the speaker plug cord is loose.

    If it doesn't work, try again: Settings General Reset Revert restores all settings.

  8. Anonymous users2024-01-31

    (1) Check whether the [Mute] button is turned on on on the side of the Apple phone, and select [Off] to mute to restore the sound.

    2) Some friends may turn on mute on the shortcut keys of the Apple mobile phone, Settings - General - Accessibility - AssistiveTouch - Turn on AssistiveTouch, and then click the small white dot displayed on the screen, and turn off the mute in the shortcut keys.

    3) Or if you set the Do Not Disturb mode of the Apple phone, then the Apple phone will be adjusted to silent state within the set time period in the settings, and your Apple phone will be quiet, and you need to manually turn off the Do Not Disturb mode setting to return to normal.

    5) If the phone sound is still not back to normal, it may be that there is an error in the Apple phone system, you can try to restart the phone to see if it can be solved, if not, you can try to restore the factory settings of the phone.

  9. Anonymous users2024-01-30

    Check whether it's muted first, the key on the upper part of the fuselage, dial it again, try if there is any sound, if not, try again: Settings General Reset Reset all settings. I hope it helps, please adopt.

  10. Anonymous users2024-01-29

    Swipe up from the bottom of the screen, and then see the volume up?

  11. Anonymous users2024-01-28

    Go to the store where you bought it and ask what the situation is.

  12. Anonymous users2024-01-27

    Look at the button on the left, if there is red, if there is, break it. If it doesn't work, press the home button twice, swipe left, and see the sound icon? Tap it. ok~

  13. Anonymous users2024-01-26

    See if there's a button on the side, and if so, bow it, 4 that's it.

  14. Anonymous users2024-01-25

    I'm also not broken.

  15. Anonymous users2024-01-24

    The microphone is broken, probably because you are not the original accessories, you still go to the professional store to do the test, the general situation is that there will be a possibility of the sound becoming smaller after the replacement, and the hardware problems that should occur when upgrading the operating system are very few, especially the original iPhone, I hope it can help you!

  16. Anonymous users2024-01-23

    Possible problems with speakers without sound are:

    1. The volume of the mobile phone is turned off and in the silent state;

    2. When the mobile phone enters the headphone mode, check whether the headphone jack has a metal piece inserted;

    3. The speaker is damaged.

    Solution: 1. Adjust the volume of the mobile phone;

    If the above methods do not solve the problem, it is recommended to take it to a repair point to check whether the speaker is damaged.

  17. Anonymous users2024-01-22

    The last time I played** when I used the speakerphone, I found that there was no sound, and I thought it was the other party's problem, but then I found that all the external sounds were gone, and the vibration function was still there. It was useless to restart, and the machine was bought for less than 2 months. It's the Hong Kong version.

    System: Yes. Ask someone in the know to tell me what to do....

    Flash your phone and give it a try.

  18. Anonymous users2024-01-21

    Go to the boss who sold you the phone, he should help you solve it anyway.

  19. Anonymous users2024-01-20

    Go to the Shanghai store to get a brand new machine for free. Hong Kong goods can be exchanged in China.

Related questions
14 answers2024-04-02

Disconnect the AirPods from the existing Bluetooth connection of the phone, open the AirPods charging case, and put in the earphones with sound. >>>More

13 answers2024-04-02

If there is no sound or other stuttering, if there is just no sound, please check the output device such as the speaker headphones first, if there is other sound, only the Elder Scrolls does not, check the settings and the volume in the sound synthesizer. If there is no problem, then there is a conflict between the old roll and your sound card driver, or the necessary components are missing, please ask for details, I am Mengmeng.

12 answers2024-04-02

I didn't encounter this kind of problem when I used to XP system.,After changing the win7 system, there is a lack of dll in the game.,And then it's solved from the Internet.,And then it's like you have no sound.,That's because the win7 system needs to install DirectX10 to play The Elder Scrolls 5,The solution is: >>>More

5 answers2024-04-02

Clever trick to solve the problem that there is no sound on the computer. >>>More

6 answers2024-04-02

Our speakers (including subwoofers) have a circuit board that amplifies the signal, which we often call it"Amplifier"...In addition to this circuit board, there is also a transformer, which is often called by the older generation"Fire Bull"It is generally separated from the circuit board, and only its output line is soldered to the circuit board. It mainly plays the role of power supply. >>>More