The air pods are silent in the right ear

Disconnect the AirPods from the existing Bluetooth connection of the phone, open the AirPods charging case, and put in the earphones with sound.

Close the lid and charge it for more than 40 minutes, then disconnect the Bluetooth connection from the phone again, and re-pair the connection again.

If the above methods do not work, it is recommended to send the earphones to a professional repair point for inspection and repair.

It automatically recognizes whether the earbuds are in the ear automatically**, and Siri control can be controlled by double-tapping. In addition, the battery life can reach 5 hours of continuous use. This new wireless earbud has a built-in optical sensor as well as an accelerometer.

Double-tap this wireless earbud to connect to Siri. During the user's play, this headset can also filter out noise and ensure sound quality.

and MacBook Connection. The microphones of AirPods use beamforming technology. Double-tapping your AirPods activates Siri, and you can ask them questions, write messages, or take control.

3. Pairing steps for the earphones: Tap the button on the back of the AirPods storage box to enter pairing mode, and then you only need to bring it close to the iPhone, and the corresponding dialog box will pop up, and click the button on the screen to complete the pairing. In this dialog, you can also see the battery level of the headphones and the storage case.

AirPods have no sound, you can try to re-pair. Open the [Bluetooth] option in the [Settings] of the phone, see the AirPods device select [Ignore this device], re-pair the phone to check if there is any sound, you can also put the two earphones back into the box and cover them, open the cover and reconnect the phone. If it is no longer recognized, the hardware may be damaged.

The specific steps are as follows:

1. Tap the [Settings] - [Bluetooth] option on your phone, find your AirPods, tap the [i] button on the right, and then select [Forget This Device] to pair your AirPods with your iPhone again; You can also put it back into the box and close the lid, and it will automatically reconnect the phone when the lid is opened;

2. You can also open [Settings] - [General] - [Accessibility] to find the [Adjust the volume balance of the left and right channels] control bar to ensure its position in the middle;

3. If you find that the earphones without sound cannot be recognized by the iPhone, it may be due to hardware failure;

4. You can also try to update your iPhone to the latest system version;

5. Or use the elimination method to try to pair with other iPhones;

6. If you still can't make a sound, you can only go to the after-sales maintenance point for maintenance. Apple's repair strategy for AirPods is to replace the damaged parts of the earbuds separately, and provide proof of purchase to an Apple Store or Apple authorized service provider for warranty or paid repair.

Maybe there is no power or the earbuds are out of order, you can put it back in the charging case and take it out again.

This problem is caused by the AirPods setting up the one-ear mode, which can be solved after re-correction. Take the Apple 8 as an example, the steps are as follows:

1. Open the phone's settings window directly and select Bluetooth to enter.

2. Next, you need to find the object and click Jump.

3. At this time, continue to browse the left and right menus there.

4. If there is no problem, determine the mode according to the actual situation.

5. In this way, the relevant results will be found, and the requirements can be realized.

Hello, please set it up according to the following operations,1Tap the [Settings] - [Bluetooth] option on your phone, find your AirPods, tap the [i] button on the right, and then select [Forget This Device] to pair AirPods with your iPhone again; It can also be reinserted into the box and closed with the lid to automatically reconnect when the lid is opened. 2.

You can also open [Settings] - [General] - [Accessibility] and find the [Adjust the volume balance of the left and right channels] control bar to ensure its position in the middle; 3.If you find that the earphones without sound are not recognized by the iPhone, it may be due to a hardware malfunction; 4.You can also try updating your iPhone to the latest system version;

Here's why AirPods have no sound in one ear:

1. If the Bluetooth connection is faulty, you need to disconnect the Bluetooth and reconnect.

2. When the power of the headphones without mold and sound is exhausted, you can fully charge the two earphones at this time.

3. The Bluetooth headset motherboard is faulty, there are problems such as poor contact, which is a hardware failure and needs to be repaired.

4. Connecting too many devices, such as iPhone, iPad or Mac, causes AirPods to not switch back when switching. It is advisable to reduce the number of connected devices.

How to care for your AirPods1. Use a dry, lint-free soft cloth for cleaning.

2. Make sure not to spill any liquid into the opening.

3. Clean the microphone and speaker grille with a dry cotton swab. Use a small, clean, dry, soft-bristled brush to remove any debris from the grille.

4. Do not use sharp objects or abrasive materials to clean AirPods or EarPods.

The bug problem caused by Bluetooth, connecting too many devices, such as iPhone, iPad or Mac, causes AirPods to not switch back when switching, AirPods failure, usually AirPods failure has to be directly sent for repair to be solved.

1. Clean AirPods: AirPods will be stuck with a bunch of dirt after using them for a long time, it is recommended to take a toothbrush or cotton cloth that you don't use to clean them, and clean the charging position under the left and right ears of AirPods and the charging case once, try it.

2. Take it down and put it on again: first take out the left and right ears of the airpods from the ears, confirm whether there is an automatic pause, turn off the Bluetooth and turn it on again, and put the left and right ears of the airpods on again It will be normal**.

4. Re-pairing: If the AirPods are connecting to Mac or Apple TV, switch back to the iOS device and re-pair the AirPods once. To confirm whether the AirPods have enough power, you can open the charging case, and iOS will automatically pop up the current charging case and earbuds power, if it shows a red no power status, it is out of power!

5. Send for repair: If the above methods are tried, there is still no solution, and finally you can only send it for repair.

The above content refers to Encyclopedia-airpods

According to a new data, Apple's true wireless earbuds may exceed 100 million sales this year, continuing to dominate the global market, which shows the popularity of AirPods. But while AirPods offer the best true wireless headphone experience, they can just as often have problems with their use. If you encounter the problem that there is no sound on one earphone, you can refer to the following methods to solve the problem:

Check battery level: In iPhone widgets, you can check that your AirPods have enough charge. AirPods may have a case where one of the earbuds consumes power quickly, which generally does not affect normal use, if one of the earbuds often consumes power quickly and the battery life is obviously abnormal, it needs to be repaired or replaced.

Put it back in the box and take it out again:

If the battery level is fine, try putting it back in your ear; If there is still no sound, you will need to try putting the earbuds all back into the charging case, closing the lid, and putting them on again.

Try to re-pair the connection:

1.Open iPhone "Settings" - "Bluetooth", tap "i" next to AirPods, select "Forget this device", and then tap again to confirm.

2.Place both AirPods in the charging case and close the lid, wait 30 seconds before turning them on;

3.Press and hold the settings button on the back of the charging case until the status light flashes white;

4.Hold your AirPods close to your device, reconnect them, then follow the prompts on your device to wear your AirPods to check if they're working again.

There is no sound in the left ear of AirPodsPro, first of all, the user can take off both earphones and put them back in the AirPodsPro charging case and cover the lid, and then take out the earphones and reconnect them after a few minutes.

Secondly, it may be caused by a problem with the mobile phone, the user can turn off the Bluetooth of the mobile phone, and then reopen the connection to try, or you can directly turn off the mobile phone and restart it, and then connect the airpodspro with the mobile phone to try.

In addition, users can also reset AirPodsPro, turn on the Bluetooth of the phone after the reset, choose to ignore the connection of the AirPodsPro device, and then re-pair the connection to try.

If the above methods fail to solve the problem, it may be caused by the low version of the mobile phone system, and it is recommended that the user upgrade the mobile phone system version. If upgrading the system version does not solve the problem, it is recommended to contact the after-sales service for relevant testing.

Data Expansion: AirPods Pro are wireless headphones launched by Apple that support active noise cancellation. It's Apple's third-generation AirPods, and it comes with a new in-ear design instead of the classic look of EarPods that have been around for years.

The in-ear type is mainly used to support noise cancellation features to enhance the listening experience.

If there is a problem with the new headphones, you can find a dealer to replace them, or find an official after-sales warranty.

It's because it's only connected to one ear BAI machine.,It's OK to reconnect to AirPods when this du.,The solution is as follows:

1. First of all, open the zhi phone settings and click on the DAO Bluetooth option.

2. Find the connected AirPods and tap the blue button on the right.

3. Click "Ignore this device" above, as shown in the image below.

4. Then put the AirPods back into the charging case, open the charging case and close to the phone, the phone will pop up.

5. Click "Connect via iCloud". The connection is successful, and the problem that one earphone of AirPods cannot be connected solves the problem.

Precautions. 1. Be sure to turn off the volume before use. If the volume of your output device is too loud, it will not only rattle the ears, but also light the diaphragm folds. The heavier ones burned the voice coil of the headphones.

2. Keep the earphones away from strong magnets. The magnetism of the unit will decrease, and the sensitivity will decrease over time!

3. Keep the earphones away from moisture. The pads inside the headphone unit will rust, the resistance will increase, and your headphones will be biased.

4. a plug part. Some friends like to put *** or something in their trouser pockets, and the plug outlet part is easy to break, and the thread will break after a long time.

There are several reasons for this:

1. The battery of AirPods is insufficient;

2. The connection between the mobile phone and the earphone is unstable;

3. A third device appears between the mobile phone and the earphone;

4. The volume of the mobile phone is not turned on;

Reasons why there is no sound from AirPods microphones:1. Bug problems caused by Bluetooth.

2. Connecting too many devices, such as iPhone, iPad or Mac, causes the AirPods to not switch back when switching.

3. AirPods are faulty. Usually, AirPods failures have to be sent directly for repair to be solved.

AirPods Tips.

1. To check the battery level, just hold the AirPods close to your iPhone, or ask Siri "How much power is left in the AirPods".

In this case, we can try to pair again, open the [Settings] of the mobile phone desktop, select [Device Connection], and then select [Bluetooth];

In [Paired Devices], select the AirPods that we have successfully paired, and a confirmation dialog box of [Disconnect] will pop up below, and click [OK] to disconnect;

Then click the settings button on the right side of the AirPods, select [Unpair] at the bottom, put the earbuds into the charging case, open the upper lid of the earbuds charging case, and press and hold the round button on the back of the charging case for three seconds;

If it doesn't work, you can only go to after-sales.