What is the best way to tune the sound of the computer?

First, first confirm that the hardware is fine. If the speaker is fine, the sound card is fine, and if you've tested it on other machines and it's really good, then you can read on.

2. Make sure all the cables are exactly right. Then power on the speaker and turn on the volume switch.

3. Install the driver of the sound card correctly, if it is an onboard sound card, it is best to install the driver provided on the driver disk of the motherboard.

In fact, the computer does not make a sound, and many times it is because the sound card is not driven correctly. In general, after the sound card driver is installed, there will be a small speaker icon in the taskbar in the lower right corner. ）

Fourth, if you are sure that the driver is installed correctly, then take a look at the volume settings in the computer.

The specific method is to double-click the speaker icon in the taskbar, and check whether the volume is turned off to the minimum in the "Volume Control" and "Waveform" dialog box in the pop-up "Volume Control" and "Waveform".

If these two options are not available in the dialog box, click on the "Options" menu - select "Properties" - select "Volume Control" and "Waveform" in the "Show Volume Controls" and then set them correctly.

Note: Step 4 can only be set up after the driver for the sound card has been installed correctly.

If you can adjust it, you should adjust it in the "sound manager" of the control panel, and don't erase life or use preset sound effects, etc.

The default is the best.,I guess there's something wrong with your speaker!

Take Dell G5, Win10 system as an example, the specific operation method is as follows:

Device: Dell G5.

System: win10.

2. In the sound dialog box, click to select the speaker, and then click "Properties" below.

3. In the speaker properties dialog box, click Adjust to the "Level" tab, and adjust the slider under "RealtekHDAuialOutput" to the maximum (100).

4. Then click to switch to the "Enhance" tab, click to select "Equalizer", and then click the ellipsis button icon behind "Settings".

5. In the graphiceq dialog box, adjust the relevant sliders.

Start grinding the --- settings --- system --- sound --- master volume Mu yard to adjust the volume by slider blind posture.

In fact, this kind of problem can be solved by restarting the computer, if you want not to restart, you can adjust it in the control panel - sound, the specific operation is as follows:

1.Once you have turned on your computer, click on Start - Control Panel.

2.To bring up the Control Panel dialog box, click Hardware & Sound.

3.Tap Adjust system volume below Sound.

4.The volume dialog box is now up.

5.Drag upwards to increase the volume; Swipe down to reduce the volume.

Take Dell G5, Win10 system as an example, the specific operation method is as follows:

1. First of all, press the win key and the letter d key at the same time to minimize all windows on the desktop and display the desktop.

2. After the desktop is displayed, use the Tab key of the computer to switch the desktop cursor.

3. After switching the cursor to the notification bar, stop switching the cursor.

4. Use the arrow keys to adjust the cursor to align the volume keys.

5. When the cursor is aimed at the volume key, hit the enter key on the computer keyboard to display the volume bar. At this time, you can adjust the volume up and down with the arrow keys. After the adjustment, press the enter key again to retract the volume key.

In addition to that, there are different ways to adjust the volume depending on the ** used. When using some software, you can adjust the sound volume by tapping the F9 and F10 keys on the computer keyboard. You can also adjust the volume of the sound by pressing the CTR key, the L key, the Alt key, and the arrow keys up or down at the same time.

Finally, the sound can be adjusted by pressing the Ctrl key and the number plus and minus keys at the same time.

It's important to note that this answer applies to most models of Dell computers.

Here's how to tune the sound on your computer:Operating system: Lenovo Xiaoxin Air 13 Pro, Windows 10, Settings 1, mouse click the volume icon in the lower right corner of the computer desktop.

2. After clicking the icon, you can drag the slider to adjust the sound.

3. Or right-click on the blank space of the desktop and click Show Settings.

4. After entering the display settings page, click on the sound icon on the left.

5. Then you can adjust the sound.