hub how to set up, how to set up a virtual hub

Problems with the router's settings.

Limit you: Only give you one IP, of course, you can only access the Internet on one machine.

Change that router.

Check what brand of router it is, find a way to be aggressive, and turn off the IP restrictions.

But I don't recommend it, and if it doesn't work, you just go and buy the routers.

5 mouths of 100 or less.

I didn't get it. Confused.

First divided into two ways by the previous route, I use one of them here, I want to use the hub to let two computers access the Internet at the same time, is it said that the router leads two wires, one into your computer, the other into the bub, to two computers?

Or is the router lead coming into the hub to connect your computer to another computer?

It should be that there is a conflict of IPs, and all of them can be set to get automatically.

I read your instructions, have you tried it with a different interface?

When the router is reset, be careful not to block the IP, your problem may also be premature.

You can just get the IP right.

To do this, right-click on a connection and select Export. Then on an unconnected machine, double-click on the exported file (**vpn file) to import it.

1. First, double-click to open the Packetix VPN client.

2. Click "Connect".

3. Click "Export VPN connection settings".

4. Select the location to save Lachun.

5、Put this exported file in those unconnected computers,Double-click this boring file to automatically import,After the operation,It should be able to display the virtual hub and connect to the wheel silver resistance normally。

This is found here in "Know", and there are actually a lot of this stuff Just take a look at it.

2.Passive.

3.Hybrid. 1.

Kinetic energy type: It has the effect of regenerating and amplifying the signal on the connected network medium, which can make the length of the connected medium reach the maximum effective length, and needs a power supply to work. 2.

The passive type only acts as a connector and does not require a power supply to operate, which is no longer common in the market. 3.Hybrid.

A wide range of cable types can be connected, such as shafts and twisted pairs.

The hub is an important tool for centralized management of the network, and like the trunk of a tree, it is the meeting point of the branches. The hub is a shared device, and its essence is a repeater, and the main function of the repeater is to regenerate and amplify the received signal to expand the transmission distance of the network. In the network, the hub is mainly used for the construction of shared networks, and is the best and most economical solution to solve the problem of going directly from the server to the desktop.

In a switched network, the hub is directly connected to the switch and sends data from the switch port to the desktop. The hub is located at a star node of the network, and the workstations connected to the nodes are centrally managed, so that the workstations with problems will not affect the normal operation of the entire network. Since the hub plays an important role in the network, it is also very important to select it.

As for the specific use method, it is just connected, and there is basically no technical content.