How to identify the quality of the glass room?

Plates and heating materials, workmanship, odor or not! Whether it is stuffy after opening the steaming room. Deng Yu Guang Glass House is said to have imported materials, which sounds good.

Look at the wood. Heating plate. The taste of wood, the best thing is that you can experience different light wave rooms first, I use Yangtze, it's okay.

1.Look at the wood. This is also the primary condition for judging the quality of the light wave room.

The most suitable timbers for light wave rooms are Canadian hemlock and red cedar. These two kinds of wood have high wood density, strong toughness and corrosion resistance, among which hemlock wood has strong hardness and is extremely difficult to deform, and red cedar has a soft texture, but has a certain fragrance. Hemlock wood is yellow, red cedar wood is reddish.

The perilla light wave room is made of splicing and molding between the whole pieces of wood, while some of the inferior light wave rooms use some domestic wood instead of hemlock or red cedar, or use the scraps of hemlock and red cedar compressed into boards.

2.Look at the heating materials: the inferior light wave room heating materials are ordinary heating films, which are flammable and easy to age.

The perilla light wave room is made of imported nano-carbon ink plate, which has high heating efficiency and no potential safety hazards. Through heating, far infrared rays with wavelengths between them are emitted, forming a resonant perspiration with human cells, thereby eliminating toxins and promoting metabolism. The heating efficiency of nano-carbon ink plate is high, close to 1:

1. It is energy-saving, not easy to be damaged, and the use time can be as long as 30-50 years, which is more than 10 times the use time of ordinary heating materials.

3.Look at workmanship. It's very simple, it's very intuitive to see the workmanship, such as the degree of polishing of the wood, as well as the bite of the parts when assembling, the fine workmanship of the light wave room is very simple when installing, and there will be no deviation, and there is no scar knot on the wood, the wood with scars is low-cost wood, such as the products of the perilla light wave room can basically ensure that the wood will not be deformed within 10 years.

1. Check the surface of the glass. The frame of a glass window is flat and smooth, and there are no scratches or bumps, indicating that it is good glass.

2. Check the hardware used in the glass. The hardware is complete, and the installation position is also very suitable, the use of the process is very flexible, Yin Xiao shows that it is a good glass.

3. Check the sealing quality. The contact between the sealing strip in the glass and the notch of the glass is very flat, there is no trace of curling, and the sealing strip will not be out of the groove, and the sealing effect is good, which indicates that it is a good glass.

1. The sun room is to put it bluntly, it is a glass-type house structure that uses aluminum alloy or other materials to build a frame, mainly using glass as the wall, and its advantage is that it has high lighting, and can make use of the owner's excess terrace and garden.

2. The inspection of the glass in the sun room, the appearance quality is mainly to check the flatness, observe whether there are bubbles, inclusions, scratches, lines and fog spots and other quality defects, the glass with such defects will be deformed in use, reduce the transparency of the glass, the mechanical strength and the thermal stability of the glass, and it is not suitable for use in engineering. Because glass is a transparent object, it can basically be identified after visual inspection when selecting.

3. The appearance quality of the glass in the sun room is not allowed to have cracks, and there are no opaque uncovered melts in the glass body, and the welding and gluing between the two glass bodies are not allowed to be poor. Visually inspect the brick without ripples, bubbles and layered fringes caused by unevenness in the glass body. The concave outer surface of the large surface of the glass brick should be less than 1 mm, the outer convex should be less than 2 mm, the weight should meet the quality standards, there should be no surface warping, notch, burr and other quality defects, and the angle should be square.

4. A high-quality sunshine room is not only good in materials, but also in workmanship to be built by first-class professionals, how to see how good or bad a sunshine room does, mainly see: whether the frame is horizontal and vertical, whether the joints of the lead cavity profile are large or small, whether the glue is beaten, beautiful, and whether there is any missing place.

1.First of all, look at the surface of the window: the window frame should be clean, smooth, smooth, no scratches and bruises on the large surface, and no open welding fracture of the profile.

2.Hardware: The hardware should be complete, the position is correct, the installation is firm, the use is flexible, and the use can achieve their respective functions.

3.Glass sealing strip: The contact between the sealing strip and the glass and the glass notch should be smooth, and the edge should not be curled or degrooved.

4.Sealing quality: When the door and window are half-closed, there is no obvious gap between the sash and the frame, and the sealing strip on the sealing surface should be in a compressed state.

5.Glass: The glass should be flat and firmly installed, there should be no loosening, the single-layer glass should not be in direct contact with the profile, the inner and outer surfaces of the double-layer glass should be clean, there should be no dust and water vapor in the glass interlayer, and the partition should not be warped.

6.Beading: The strip with sealing strip must be fully attached to the glass, and there should be no obvious gap between the bead and the profile.

7.Patchwork: The patchwork should be tightly connected with the window frame, and at the same time sealed with caulking paste and should not be shaken.

8.Switch components: casement, sliding or rotating windows should be closed tightly.

9。Drainage holes: Drainage holes should be positioned correctly and at the same time be unobstructed.

For water leakage detection, spray it 360 degrees with the faucet.

Light transmission detection. Impact resistance test, hit it with a small gravel.

So so. The sunroom now uses endurance boards. You can take a look at the plates of Cotron.