Is there any good study plan for fire preparation at this stage? I took the test once last year, and

Hello and a pleasure for you.

You have taken the exam last year, so you are an old candidate, and you must have a certain understanding of the application conditions and the content of the exam.

What we want to do:

Don't give up halfway, follow a good teacher, follow a teacher who can help you understand, understand, and master the test points, step by step, and when you can understand the book, it will be relatively easy to learn the knowledge, firmly believe that you will be able to pass, you have already succeeded halfway.

1.Plan management - long plan, short arrangement, squeeze time, efficiency.

2.Preparatory Management - Reading, Writing, Practice (20 questions in each chapter).

3.Lecture management - listen to the key points and take notes.

4.Review management - think, check, read, write, speak (listening to understand is not really understood, explaining is really understood).

5.Homework management - self-discipline (after making a summary, what have you learned, the proposition point is in **, if you take the exam in 2020, what form will it take).

6.Mistake management - frequent reflection (establish a mistake book, the first half of the original question, the second half of the cause of the error and the number of errors).

7.Examination management - focus on the key points (sort out the key points of the exam from the distribution statistics of past past question scores, and extract high-frequency test points from the key chapters).

1.Empty your mind and start anew, you must follow the concise lecture again.

2.Start making a study plan now, sooner rather than later.

3.Perseverance to the end, success must belong to us.

We'll be happy to answer for you.

Each of the four learning stages has its own focus:

The first-level fire engineer exam is divided into four stages: the basic stage, the intensive stage, the intensive stage and the sprint stage.

Each stage of learning has its own focus, and if you want to make reasonable use of time and improve learning efficiency, you must grasp the key points and "prescribe the right medicine" at each learning stage.

In the basic stage, it is necessary to study the new textbooks again and have a good understanding of the knowledge of each subject.

In the intensive lecture stage, it is necessary to carefully study every knowledge point of the new textbook, understand it thoroughly, and mark the content that it does not know.

In the intensive stage, you will begin to do a lot of questions, and at the same time understand the key and difficult points.

In the sprint stage, you need to return to the textbook and recall the relevant knowledge points in the textbook when doing the comprehensive set of questions.

Hope it helps.

I feel that if it is not for the fire industry, it is still very difficult to take the fire fighting exam and prepare for the exam.

It is recommended to find a more reliable one. It is better to follow the rhythm of the training institution and prepare for the exam.

Finally, I wish you all the best in your exams.

Three books, technical practice, comprehensive ability, case analysis, if you look carefully at the table of contents, you will find that they are actually talking about a book. The main test is the second article of building fire prevention and the third article of fire protection facilities. The score of two blocks is more than 80%, so the rest is left alone for the time being, and the main learning is these two aspects.

This narrows his scope.

Secondly, you can't blindly memorize these two contents, and the learning skills of fire fighting are to combine with actual life and understand the principles.

Building fire prevention: fire protection is mainly safety, but also economic. For example, if the fire spacing of two buildings is 12 meters to meet the requirements of the code, then 13 meters must also meet the requirements, because the farther away the building, the safer.

Fire protection facilities: Be sure to draw a diagram to understand the principle of each system, which is the foundation, draw a diagram to mark the design requirements of each component on the diagram, and go to be familiar with it every day.

After the two basic knowledge have been mastered, then the second stage must be done. Simple questions can help us memorize knowledge points, and difficult questions can help us avoid the pits dug by the proposition teacher. Return to the basics with mistakes.

The third stage is to do a whole set of mock questions, and it is best to set up a time for yourself to do the questions in their entirety just like a regular exam. At this time, be sure to set aside 10 minutes to 20 minutes to be rich, and don't forget that you really need a picture card for the exam.

The three stages of learning are the main ideas, the textbook first looks at the technical practice and then synthesizes the final case, the case must be written more, and the students who are used to the mouse and keyboard should change their posture.

You're also happy to answer your questions.

Practice a lot and be able to answer questions (October).

The fire exam questions are flexible, which requires us to practice more before the exam, simulate more + do real questions. At this stage of practice, don't look for some basic chapters and fill-in-the-blank multiple-choice questions, choose a certain depth and a set of mock questions, conduct mock exams according to the requirements of the exam time, and carefully analyze the wrong questions after each set of questions, so as to draw inferences from one another. You can also take out the past year's past papers and do them carefully, and be familiar with the question type, difficulty and ideas of the past questions.

Prepare and answer the past questions (November).

Before the test, plan and arrange the place to eat and lodging, prepare the tools and admission ticket, and calculate the distance and departure time of the test room. I can't understand people who are late for the exam, I can only think that you didn't study well enough, and the exam is just to feel the atmosphere and question type of the exam. Otherwise, how could he be so irresponsible to himself, usually studying hard day and night, fighting for hundreds of days, and pinching this time after the exam.

The night before the exam, be sure to verify whether you have all the required things such as ID card, admission ticket, test center, 2B pencil, eraser, watch, etc. (it is recommended that you buy a mechanical watch during the exam, **You can buy one for more than 20 yuan, it is very important to master the time during the exam, especially the case). Check again before going out in the morning, send the test papers and answer sheets, don't rush to do the questions, fill in the exam information (name, admission ticket, etc.) first. Relax and answer questions without being influenced by other circumstances.

Finally, I wish you all the best of luck in passing the exam.

It was found that it was less than 20 days before the 2019 Jiangxi Class 1 Fire Engineer Examination. I believe that for the students who are preparing for the exam, the tension of the exam is getting heavier and heavier, everyone starts from the basic stage, after a long period of study, Dongxue Education believes that there are three ways to check and fill in the gaps: 1. Sort out the knowledge points, so that each knowledge point is connected by the dots to form a knowledge network; 2. Dongxue Education feels that there is no need to brush up on a lot of questions at this stage, do the real questions of the first-class fire engineer over the years, and 3. Read the exercises that are usually wrong.

Dongxue Education wishes you all a smooth exam and pass the exam as soon as possible

A few tips on preparing for the Fire Engineer I exam.

To prepare for the exam, you should pay attention to the method and study efficiently. Whether the method is appropriate or not directly determines the success or failure of the exam. Each discipline has its own laws and characteristics, and it is necessary to grasp these characteristics and achieve twice the result with half the effort. Give a general advice:

1.To complete the class content with high quality;

2.Be sure to review the content of the teacher in time after listening to the class, especially the after-class practice questions of each chapter, you must do it yourself when reviewing, not just watch, because there is a big difference between being able to understand and being able to make it independently.

3.When completing a topic, we should consider the knowledge points examined by the topic, what type of question type it belongs to, and what kind of good ideas, methods, and templates there are;

4.The study time should be reasonably arranged, and the study should not only look at the foundation or professional practice for a long time, and the study should have a reasonable match.

One: Reading is not detailed, not thorough, swallowing dates, rote memorization, and no understanding.

Reading books is always guided by the syllabus, and the knowledge points outside the syllabus are ignored, resulting in more points and heavy losses when encountering knowledge points outside the syllabus when taking the exam. There are many knowledge points in the first-level fire engineer that require us to memorize comprehensibly, rather than rote memorization, which will waste a lot of time and result in half the effort. Therefore, candidates must learn to understand memorization and integrate it with actual work.

This is beneficial and harmless for the exam.

2. Blindly divide the key and non-key points, invest too much energy in the key parts, and hastily pass the non-key parts at a glance.

What you get in the exam is the key point, and what you can't get is the non-focus. Therefore, candidates must make a review plan before preparing for the exam, and determine the key and difficult points according to the content of the exam syllabus. In order to facilitate contentious revision.

3. Passive acceptance when doing mock questions, not good at combining teaching materials, drawing inferences from one another, and not delving into the reasons for vague questions, so that the next time you encounter the same topic, you will make the same mistake.

This situation is a situation that often occurs to candidates, so when preparing for the exam, we should conduct in-depth research on our own ambiguous and important problems and solve them, so that we will not lose again in the examination room.

Candidates who took the 2018 Class 1 Fire Engineer Exam have already embarked on the journey to prepare for the exam, and it is not an easy thing to prepare for the Fire Engineer exam, and candidates will encounter various problems. Whether the preparation time is sufficient has a very important impact on whether the first-class fire engineer exam can be passed, and many candidates report that the preparation time is really not enough, so how to make the preparation time more so.

The education of the academic pulse is in the same vein as the past questions.

1. Use fragmented time and rest days to study.

Many office workers report that the time is very insufficient, they can't study in the unit during work, and they go home very late, and the study time left for the first-class fire engineer does not seem to be very much, but this is not an excuse for insufficient time. Time can be squeezed out, such as when you take the subway to work, when you pick up your children from school and wait for your children, you can watch a few fire knowledge points, and it is better to watch than not to watch.

Many candidates can guarantee little study time on weekdays, so try to study as much as possible on rest days, rest and entertainment are okay, but don't overdo it, everything should be based on preparing for fire engineers.

2. Improve learning efficiency.

Many candidates do not have much time to prepare for the exam, and the reason for this is that the preparation efficiency is too low. It seems that I have studied for a long time, but the actual effective time may only be 1 hour, and there are not many knowledge points that I have really mastered. Many candidates will be affected and disturbed by other things when they read the first-level fire engineer textbooks or listen to the first-level fire engineer courseware, so they must calm down, not in the unexpected world, and create a good learning environment for themselves.

If you still can't do it, you might as well go to the library and other suitable places to study, and the learning efficiency will increase, and the study time will be sufficient.

3. Overcome inertia.

Candidates may wish to force themselves to study for an hour or two first, and then gradually increase some study time after getting used to it, and gradually they will find that it is not so difficult to fully immerse themselves in learning.

1. Regular learning.

It is crucial to maintain a regular study state before the state exam to pass the exam, which requires candidates to spend about three hours a day on revision, focusing on the high-frequency test points of each subject and the knowledge points of fire engineers that have been published over the years. And pinch the points to do the fire engineer past questions, and study the knowledge points in the past questions. The mistakes accumulated in the past should be reviewed regularly, and the combination of the three should be gradually cycled to gradually advance the learning progress.

2. Upward psychological state.

Mood directly affects the state of learning, many candidates are prone to anxiety before the exam, and the questions cannot be done, the book cannot be read, and the precious preparation time is wasted. In order to improve the efficiency of review and preparation, candidates need to maintain a positive learning attitude, face various problems in preparation with an invincible mentality, and overcome the problems one by one.

3. Healthy physical condition.

Preparing for the fire engineer exam is a mental and physical thing, as the so-called body is the capital of the revolution, it is important to maintain a healthy physical condition before the exam.

Some candidates are accustomed to raiding before the exam, reading at night in the last few days, sleeping only three or four hours a day, and studying for a long time is easy to produce brain fatigue, which is not only not conducive to preparing for the exam but will affect the development of normal work and life. Therefore, candidates should try to ensure 7-8 hours of sleep and maintain a healthy body to meet the exam.

Only with a good study, physical and mental state can you avoid worries and go all out to sprint for the exam.