-
To detect whether there is a problem with the memory module, you need to click the start menu control panel, double-click to open the management tool, if the display is different, click the view method in the upper right corner, select the big icon, double-click the windows memory diagnosis in the management tool, click restart now and check the problem, restart, and automatically enter the windows memory diagnosis tool.
-
This should be a compatibility issue, you just need to replace the kind of memory of the same model and brand.
-
Apparently caused by the use of the two new memories together.
du 1, single insert a memory, see if there is a problem with the memory. If a single DAO is normal, it means that there is a compatibility problem between the two memories.
2. Try a different memory. Or swap the two memory slots.
3. If it still doesn't work, pay attention to see if the frequency of the new memory is the same as the old memory. In addition, the new memory should use double-sided memory as much as possible, which is more compatible.
-
Try to take down the 512 memory and then turn it on, and then turn it on, if it can start normally, the memory of the original 256 is good, if the two are plugged in and then turned on and there is only 512, then it should be an incompatible problem, go to change the memory module supported by the motherboard model!
-
It depends on your motherboard, you have two slots on the motherboard to insert a memory module, if there are four, then you can insert two, and you must set it up in Bois, when inserting the memory module, you must plug it in close to the CPU fan, otherwise there may be some strange failures.
-
It should be an incompatibility issue. This is sometimes the case with memory incompatibility. However, memory is not expensive now. It is recommended that you buy 2 512 directly. Dispose of the 256 to the merchant.
-
The maximum estimate is 16g, if it is single, it should be 4g, you can buy a 2g instead of 512, don't worry about compatibility.
-
It is recommended that you don't want this 512 and just buy a DDR2 2G and install it.
Now it's hard to find 512. Packed with 1g. 1G RAM will reduce the frequency to balance the 512. There is some loss of performance.
Now memory is cheap, DDR2
More than 100 of 2 g.
-
The landlord's motherboard does not support dual-channel handlebars? That's only a 512M memory module! No way to fix it!
-
Install one memory at a time, check whether there is a problem with the memory one by one, in this case, one memory may be faulty.
-
If the memory is not good, it depends on how bad it is, and the result is different.
1. If it's just that the brand is not good and the workmanship is not good, it can generally be used normally, but the performance is poor, the speed is slow, or the overclocking is not good. Because the current motherboard is overclocked, most of them are the external frequency of the super CPU, and the increase of the external frequency means that the frequency of the memory is also increased, because it is synchronized. Therefore, if the memory is not good, it will not be able to withstand this improvement, which will lead to overclocking failure.
Some motherboards can manually specify the memory to a certain frequency or a certain ratio, which can improve the stability of overclocking.
2. If the memory quality is not good and there are quality problems, then the computer will be unstable, sometimes losing data, sometimes blue screen, and sometimes suddenly restarting.
3. Generally, you can buy the memory of famous brand manufacturers. There are not many brands in memory now, there are a small number of small brands, but there is not much difference in **, so it is recommended to buy products from large manufacturers.
-
Hello, memory is one of the essential components of a computer, and the CPU can address the memory through the data bus. Previous computer motherboards had main memory, and memory modules were an extension of the main memory. Today's computer motherboards rely entirely on memory modules for memory.
All content on external memory must pass through memory in order to function. So the memory module dominates your computer, it is recommended to change the memory module to a better one or directly change to a new computer =-=
ASUS P5VD1-X motherboard chip.
Supports dual-channel DDR 400 333 >>>More
Mixed plugging is possible, as long as the parameters of the two memories are about the same, in fact, as long as it is not dual-channel, the parameters of DDR memory are similar, generally put the latest maximum capacity in bank0, and then bank1, that is, your 512MDDR400 is placed in bank0 slot (the one closest to the CPU), and 256DDR333 is placed in bank1. Of course, if you mix and plug in, the DDR400 will automatically drop to 333 to run, but the increase in capacity can make up for the lack of speed, and the speed is almost unfelt, if you are running large software, large memory will definitely prevail. You can tell by the speed at which you open a word file. >>>More
The speed of adding memory will be felt.
DDR3 is definitely DDR2 good, but the slots are not the same, that is to say, two slots cannot be inserted into the same slot. If you originally support DDR2 800, then you can only change DDR2. If the motherboard is a mix of DDR2 and DDR3, remember to correspond.
Memory is an indispensable component of a computer (PC, MCU). Unlike dispensable external memory, memory is a component that reads and writes on a bus; Memory is more than just a data warehouse. In addition to a small number of indispensable programs in the operating system to reside in memory, the programs we usually use, such as Windows, Linux and other system software, including typing software, game software, etc., although a large amount of data including programs are placed on external memory devices such as tapes, disks, optical discs, mobile disks, etc., but any data in external memory can only be really used when transferred into memory. >>>More