Can t share the print when you start the computer again? I did not install the restoration .

If the printer is installed on A, and B shares A, then you should turn on computer B first and then turn on computer A. If you want to restart B and print again, then you need to find computer A and double-click the printer in A. So that B can be printed.

How to do it: When A is turned on, enter it in the operation of B"\\"And then add the IP address of A and you're found. If it doesn't work, just leave me a message and I can help you take a look, hehe, remember to add points!!

Don't worry, landlord, the main thing is that I have encountered such a problem before Is it not possible to print after every B restart?? Let's see that there is a management - service in the control panel, and the printer option in it is enabled.

It seems that I heard you talk about it.,Installed things B computer restarts itself and restores itself to before installation.,Right? Is it the same for other programs? (If you don't use computer B yourself, it is recommended that you see if it is installed with software similar to Restore Wizard).

If you don't find it, it is recommended that you create a system for B computer ghost, and rule out the problem of system settings. It seems that there should be no other methods (because you also know, there are a lot of fine-tuning places under the printing, sharing, and XP systems, which are the specific influences, at least I haven't been professional to this extent, if you want to know more about the setting method, you can search inside, there are a lot of them).

Good luck

When using the printer on the computer, you often encounter the problem of not being able to connect, how to deal with this problem? The following is the relevant information that I have compiled for you about the computer that cannot be used after the restart of the shared printer, I hope it will help you!

Generally, if the system is just installed, if the system program is not changed much, the shared connection is normal. If you can't connect for the time being, we can connect again with the following methods.

The first method is to click the start menu in the lower left corner of the desktop, open the control panel, click on Printers and Faxes, click Add Printers on the left side of Printers and Faxes, select Next in the pop-up Add Printer Wizard, and then select the "Network Printer or Printer connected to other computers" option, and then in the next step, you can choose"Browse Printers", if you know the exact name of the other party's network neighbor and the name of the printer, you can also select the "Connect to this printer" option.

The details are shown in the figure below.

<> the second method is simpler, you can double-click on the Internet neighbor on the desktop, click on the "View Workgroup Computer" option on the left side of the Internet Neighbor interface, and double-click the printer point that needs to be connected in it, as shown in the figure:

<> if you can't connect, and it says "Ghust user is disabled", you can go to the control panel, click "Management Tools" in the control panel, select "Computer Management", select "Local Users and Groups" on the left, and right-click "Guest" in the user"attributes, check the "user cannot change the password" and "the account has been deactivated" in the attributes, and click OK. As shown in the figure below, the guest account is enabled.

<> if the above methods still don't work, go ahead and select Control Panel, Administrative Tools, and select "Local Security Policy". Click "User Rights Assignment" in "Local Policy", find "Access to computers from the network" in the policy on the right, and set "guest"."The user is added. Then find "Deny access to this computer from the network" and delete it if you see "guest" in the policy.

Click OK to save. As shown in the figure below.

What's the deal with the printer disappearing?

There are many types of printers, according to whether the printing element hits the paper, it is divided into impact printers and non-impact printers. According to the structure of printed characters, it is divided into full-character printers and dot matrix character printers.

According to the way that a line of words is formed on paper, it is divided into serial printers and line printers. According to the technology adopted, it is divided into cylindrical, spherical, inkjet, thermal, laser, electrostatic, magnetic, light-emitting diode and other printers.

It is inevitable that you will encounter small problems of one kind or another in ordinary use. Below, let's take a look at the reasons and solutions for the printer disappeared after the computer restarts.

Fault phenomenon. 1. After the computer restarts, the printer in the device and the printer disappears, and the printer cannot be used, but it can be used again after reinstalling the driver every time.

2. When the printer cannot be used, an error will be reported when the device and printer are turned on (referring to the "printer and fax" in the XP system).

Reasons and solutions for the printer to disappear after the computer restarts.

Reasons and solutions for the printer to disappear after the computer restarts.

Cause analysis. Print Spooler --- set File Print Service Start Type to Manual.

Solution. 1. In the runtime, enter "Open 'Services' in 'Services and Applications'."

Reasons and solutions for the printer to disappear after the computer restarts.

2. Set the Print Spooler service to "Automatic" and set the service status to "Start".

Note: When this service is set to disabled, the printer is also unusable and the printer cannot be installed.

When we use the win10 system, it is inevitable that there will be various problems. Recently, some netizens said that their computer is win10 system, but the keyboard can not be used after the computer is turned on for the first time, and it can't be typed, but after restarting the computer, it will suddenly be fine. So how do we solve it?

The following IT encyclopedia shares the solution that the keyboard cannot be used after the win10 computer is turned on, and it needs to be restarted before it can be typed.

Workaround: Turn off Fast Startup.

First of all, we open the control panel, modify the viewing method to "big icon", click "Power Options", click "Select the function of the power button", if we can't modify the operation of the shutdown settings, we first click "Change the current unavailable settings", and remove the check in front of "Enable fast start (recommended)" in the shutdown settings.

Is it to restart the server?,It's okay to set up sharing again.,Now try to use the network connection.。

Dear, I'm glad to answer for you: What should I do if the original computer's own printer can't be used after sharing the printerAnswer: After sharing the printer, the original computer's own printer can't be usedThe solution process is as follows:

On the computer connected to the printer, share the printer settings and remember to look at the name of the machine (right-click on My Computer --Properties --Computer Name). Then on another computer, click Start - Printers and Faxes - Add Printers - Next select "Network Printer or Printer Connected to Other Computers" - Next Browse Printers, find the name of the previous computer, there will be a printer below, double-click on the printer to install the driver, you can use it.

Click the Control Panel, Printers, and Fax icons, right-click the printer icon that appears and select Share, and then add the printer to the other two computers.

Open Control Panel - Printers & Fax Machines and share your printer settings.

Log in to your computer on the other two computers by doing this:

Start - Run - Enter your computer's IP - Enter the username and password - Double-click on the printer you are sharing.

The firewall is forbidden or something, or the service is not opened.

1. Check the LAN first to see if it can be connected to the host. 2. Reinstall the printer driver.

1.Can the other one print properly?

2.Can your computer access other computers on the LAN normally work, that is, can you see another computer in your online neighbors?

3.If the other one can play and yours can see other computers, then go to your own computer and reinstall the network printer.

4.If the other party can't print, then check the line, check the driver, and check whether the printer itself has an error.

5.Check whether the other printer is in the shared state, and there is a hand under the printer that is in the shared state.

6.The other party can print normally, and yours can't see other computers, nor can you surf the Internet or anything, then check whether your own computer's network cable is normal.

7. If it doesn't work, then you have to run the printer sharing on another computer again. Then install Network Print on your computer.

8. If it doesn't work after all the steps, just run "Open LAN Sharing" on another computer, which can be on the Internet**. And run one of these tools on your computer as well. If the network cable is normal and the network is fine, then reinstall the network printer, and it should be OK.

9.If you can't do it, then ask someone who understands computer networks to help you.

The IP address of the computer to which the printer is connected.

Just reinstall the printing program.