After the computer enters the desktop, the screen goes black, and it cannot be turned on if it is re

1. Whether the computer monitor and the host are normally connected to the power supply, and whether the power indicator is on. 2. If it is a notebook to check the power indicator of the computer, if it is not lit and the computer is connected correctly, it is very likely that there is a problem with the motherboard, please send it to the warranty point for repair in time.

Reboot, when you are about to enter the system, press F8 and select the installation mode. See if you can get in. If you can get in, run 360 or something to kill the poison. Then try to reboot into the system.

Can I still go into safe mode? If you can get in, uninstall the graphics card driver, and then boot it and reinstall a graphics card driver, and then if it doesn't work, pull out the graphics card in the computer and wipe it, try it, if there is an integrated graphics card on the motherboard, you can try the integrated graphics card to see if it can be started! If it doesn't work, reinstalling the system doesn't work, it's a motherboard problem!

Realtek RTL8110S 8169S Gigabit Boot Agent Press Shift+F10 to Configure,The previous general description is what is wrong,Press Shift+F10 to reset it。 Reboot via f1f2. You didn't make it very clear, if you can handle it, open the case, clean up the dust, and reinsert the memory.

You turn off the computer completely, put it for 1 hour, and then press the boot button on the host from time to time, and then plug it in, choose the safe mode before booting, and then if you can get in, choose the correct configuration once, and you can use it temporarily.

The next interface is ress f1 or f2 or something is not press f1 or f2, that is, you are called to press f1 or f2, you have pressed no, if there is still not, then there is only a reinstall system.

If you can't reinstall the system, then it's likely that the hard drive is broken.

1.When starting the computer, press the F8 key before the system enters the Windows boot screen; Once the operating system multi-mode boot menu appears, use the arrow keys on your keyboard to select "Safemode" to boot your computer in safe mode.

Press [Hkey Current User Software, Microsoft Windows CurrentVersion Policies System].

path to the Policies System item and see if there is a suspicious string like this.

3.In the data bar on the right, you may find a string like this:

shell"="c:\windows\ c:\windows\system32\ "One of them is actually a malicious program; When processing, just put the "c:" at the end of the registry key above

Windows System32 can be partially deleted.

4.Once you're done, restart your computer and you should be fine; It is recommended that you do another Trojan kill.

This is caused by the resolution being set too high. Just change the resolution.

1. Right-click on the blank space of the desktop - select the screen resolution.

2. Adjust the screen resolution, and directly select a lower resolution than before.

I just encountered,The computer boots without the first screen,No hard disk self-test,Can enter the desktop at normal speed,At this time you want to reinstall the system,Or enter the BIOS mode is impossible,Check the processing method said on the Internet,And then the egg,I tinkered with it for a few days,Change a graphics card,The problem is solved。

The first thing to tell you is that it won't damage the hardware.,The hardware is not damaged.,It may be a compatibility problem between the graphics card and the display resolution.,You can reinstall the graphics card driver to try.,But the way you boot up this computer is also pretty good.,It's the boot way I've always dreamed of.,How annoying is that win flag scrolling page.。。 You're a blessing in disguise, hehe...

I'm the same way, if you don't solve this problem, don't reinstall the system, otherwise you'll keep the screen black!! My workaround was to pluck all my feet and wipe them down. If that doesn't work, see if there are other spare pins to plug in.

The resolution is set too high when the computer is turned on and the black screen is directly entered, and the resolution can be changed after entering the desktop.

1. Right-click on the blank space of the desktop - select the screen resolution.

2. Adjust the screen resolution, and directly select a lower resolution than before.

Look at how frank I am, just mix it up.

If it can start and run normally, it is completely problematic.

If you can enjoy the fruit directly, you need to do it with branches and leaves.

With the same effect, it's good to surf the Internet without any problem. Team hardware makes a difference.

Wow! You're too bold! 20 minutes that.

Summary. 1.After powering on the low spoon about cricket vinegar F8, safe mode After entering the system:

Set the resolution to 800*600>15-inch monitor or 1024*768>17-inch monitor, refresh rate 75hz> and reboot is fine. 2.If the safe mode cannot be entered, there is no hardware problem, press F8 when the machine is correct, and this item can solve the problem in most cases.

3.After booting up, the black screen can enter the desktop. This situation is not serious, Start--run--msconfig except for ctfmon, the rest are removed, "After the above steps are completed, the problem can be solved."

4.After booting up, the hardware detects that the screen is black for 1 minute, and the scroll bar of the XP splash screen comes out. You may have Macfee installed on your system, and it has some conflicts with the ghost system, and the system will also crash inexplicably, and under normal circumstances, it will return to normal after uninstalling.

1.After powering on, the low key is about Cricket Vinegar F8, and the safe mode is after entering the system: Set the resolution to 800*600>15-inch monitor or 1024*768>17-inch monitor refresh rate 75Hz> and reboot it.

2.If the safe mode cannot be entered, there is no hardware problem, press F8 when the machine is correct, and this item can solve the problem in most cases. 3.

After booting up, the black screen can enter the desktop. This situation is not serious, Start--run--msconfig except for ctfmon, the rest are removed, "After the above steps are completed, the problem can be solved." 4.

After booting up, the hardware detects that the screen is black for 1 minute, and the scroll bar of the XP splash screen comes out. You may have Macfee installed on your system, and it has some conflicts with the ghost system, and the system will also crash inexplicably, and under normal circumstances, it will return to normal after uninstalling.

If the above methods cannot be solved, it is recommended that you send your computer to a professional repair shop for free testing.

But it's good to click the esc key a few more times, but every time you enter.

Dear, it may be that the computer has not been cleaned for a long time or is old, just take it for maintenance and check.

Wallpaper bug <>

Heavy year back with the new Hulu set up the world god wallpaper on the line, pay attention to the system update.

As far as the description and content are concerned, it can be judged that there is no problem with the hardware, the driver is normal, and the graphics card is working and the residual difference is normal.

It is recommended to check the keyboard and mouse, do not insert the keyboard and mouse, turn on the computer, and see if it will still be.

If it is still like this after replacing the desktop wallpaper, it can only be a system problem, and it is recommended to reinstall the system.

Destruction.