The HP cartridge cannot be detected, but it can be detected again if you change it

The merchant should change it, it's purely a cartridge problem! No matter where it is, it makes sense, and if it is substituted, it can be replaced, if it is imitated, a ** store will be closed in the past, and it will definitely be replaced!

I bought a HP printer, the ink in the original ink cartridge ran out, I saw that many of the Internet are recommended to fill the ink, so I tried it with the heart of trying, hey, the mistake is wrong, the note is cheap only 20 pieces of note once, but after a day, I found that the print head does not ink, to detect that because I injected ink to destroy the air system in the print head, resulting in the print head not out of ink, and at the same time because of the ink injection, resulting in ink leakage in the printer. What's more serious is because of the problem caused by ink filling, and the printer does not have a warranty.

As long as it is replaced, it cannot be detected, but it can still be used directly after changing the cartridge.

As far as my personal experience with home printers for several years is concerned, the cost savings are not only reflected in the ** consumables, but also take into account the maintenance costs used, I have used compatible ink cartridges for a period of time. **is low, you can save a lot of money, but then there were a lot of problems, let me suffer a lot of losses, first of all, when printing**, the printing effect of compatible cartridges is very unstable, often color cast, waste a lot of materials, very depressed, good** how can not play a good effect! And there are often serious ink leaks, paper jams, and later burned the circuit board of the printer!

Alas, what a small amount of money and a big loss!

Non-original cartridges are undetectable, but can be used, go online to find the right model of driver.

I heard that I can save a lot of money by filling ink, so I went to buy a bottle and came back, according to the instructions on the Internet step by step, there was no problem at first, and it was relatively smooth, but then somehow the ink mouth was blocked, and the ink began to seep outside, as a result, my hands, printer, desk, the ground was pitch black, and I couldn't wash it clean.

It means that the life of this cartridge has reached the end of its life, or it is a line fault, resulting in an induction error.

I bought a compatible cartridge, which was 40 yuan cheaper, but within a few days, the color deviated, and the printing effect was too far from the original. The number of printed pages is dozens of pages more than the original, and I heard that basically domestic general consumables factories are buying brand ink cartridges and toner cartridges. And then fill the production, so it's not surprising that it's cheap.

3 words: wipe contacts.

If you can't wipe it with alcohol, you can only throw it very loudly.

These methods are not applicable to all printers, and they are cumbersome, and they can be changed by themselves, and if you don't pay attention to them, you will be wrong. When the time comes, the machine is broken, and people will not be warranted, who will go to!

1. If the printer cartridge is not installed correctly, it is recommended to take out the cartridge and reinstall it for testing;

2. If there is a problem with the quality of the printer cartridge itself, it is recommended to replace it with a new cartridge for testing;

3. If the printer cartridge chip is damaged, you can contact the after-sales service to replace the cartridge chip for testing;

4. If the printer main control board is faulty or hardware faulty, it is recommended to contact the printer after-sales service for testing and replacement.

Hello, HP printer, I added ink by myself to show that the ink cartridge is not compatible, the reasons are as follows: 1. There is a problem with the quality of the printing cartridge, or it has been damaged when adding ink, replace it with a new ink cartridge for testing. 2. Some models of HP printer cartridges do not support adding ink, and the inside is packed with tin foil, which will be damaged if the ink is forcibly added.

3. If the printer cartridge chip is dirty or damaged, clean the chip with an eraser or replace it. 4. The cartridge was not installed correctly, so the cartridge was taken and reinstalled.

Because there is a chip on the ink cartridge, whether there is an ink cover or not, I know that the printer does not count, it has the final say. It is necessary to make the printer continue to work by clearing the counter, but also to ensure the printing effect, when the ink cartridge ink is about to run out, the printer will stop working, even if you add ink is useless, the printer is still on strike, this situation needs to be cleared with a special cartridge clearing software. However, some printers can print without clearing, Canon and HP can also print when prompting a lack of ink, and Epson is a direct strike.

If my answer can help you, please give me a thumbs up!

Summary. First, the cause of the failure:

1. Powder cartridges are not original cartridges.

2. The cartridge is not installed in place.

3. The cartridge sensor is damaged, resulting in the undetectable cartridge.

4. The main control board is faulty, resulting in a display error.

2. Solution:

1. If the ink cartridge is fine, reconnect the printer, sometimes because of some problems in the system.

2. Pay attention to the position of the printer, if there is a problem with the placement of the printer, it will also cause it to not work.

3. If it doesn't work, turn off the printer, then take out the ink cartridge, and then align it to install it. Not yet, check the driver, reinstall the driver.

4. If none of the above can be solved, it may be that the metal sheet on the cartridge has not been used for a long time, and the contact is poor, so you have to take out the cartridge, and then wipe it clean with an eraser, and you will find that the metal sheet on the cartridge is shiny. If you install it again, there will generally be no problem.

5. If the problem cannot be solved, it is necessary to consider whether the cartridge is damaged, and it is recommended to replace the cartridge.

HP cartridges are not recognized after they are refilled.

1. Cause of failure: 1. The powder cartridge is not the original cartridge. 2. The cartridge is not installed in place.

3. The cartridge sensor is damaged, resulting in the undetectable cartridge. 4. The main control board is faulty, resulting in a display error. 2. Solution:

1. If the ink cartridge is fine, reconnect the printer, sometimes because of some problems in the system. 2. Pay attention to the position of the printer, if there is a problem with the placement of the printer, it will also cause it to not work. 3. If it doesn't work, turn off the printer, then take out the ink cartridge, and then align it to install it.

Not yet, check the driver, reinstall the driver. 4. If none of the above can be solved, it may be that the metal sheet on the cartridge has not been used for a long time, and the contact is poor, so you have to take out the cartridge, and then wipe it clean with an eraser, and you will find that the metal sheet on the cartridge is shiny. If you install it again, there will generally be no problem.

5. If the problem cannot be solved, it is necessary to consider whether the cartridge is damaged, and it is recommended to replace the cartridge.

It was useless to try it all, just replaced with a new cartridge.

That is not a problem with the printer, it is recommended to play after-sales service**, with professional engineer guidance.

They also don't charge a fee and can also handle it remotely. Yes. ok

If your cartridge is not recognized, there may be a foreign object in the chip area, remove it and wipe it lightly before installation. If there is still a problem, it may be that the cartridge is damaged, and it can be solved by contacting the after-sales service.

1.The ink cartridge can be tried like this: wipe the ink cartridge and the yellow metal dots in the printer with a dry and clean napkin and then put it back to see if it is normal, and if there is an error, it is only recommended to replace the ink cartridge.

2.In addition, if the final warranty period of the cartridge (on the top of the yellow metal dot on the cartridge body) has passed, it will not be wiped and replaced directly, even if it is solved today, it may be reported again tomorrow.

3.Take down the cartridges in, pull out the power directly when the machine is turned on, wait for 10 seconds and then press and hold the start and cancel (that is, the first and second keys) do not let go of the power supply, wait for all the lights to turn on and then go out after the release of the two keys, and then put back the cartridge to see if the error is reported (mainly depends on the machine) do not report nothing, if the error is reported to the cartridge detection, this problem can be called 800 to ask

The method of judging that the ink cartridge is broken is relatively simple, under normal circumstances, if the printer cannot detect the ink cartridge, or the printer prompts an error, it is said that the ink cartridge is broken. Therefore, it is necessary to pay attention when using it.

If the ink cartridge model is wrong, then when printing, the printed effect will be very different, the printer may not prompt an error, and can print normally, but after a period of printing, the printhead may be blocked, and the ink will be uneven. In general, the blockage of the print head and nozzle is the most common fault of inkjet printers, which is mainly manifested in the horizontal stripes on the surface of the printed manuscript, and some colors cannot be printed at all in serious cases, especially when printing image files.

Precautions when using the number of gods:

For the original ink cartridge it has a control chip at the bottom, is a protective device, if the artificial injection of ink has indirectly changed its monitoring principle, theoretically speaking, as long as the printing effect is normal, there is no need to replace the ink cartridge temporarily, if the printing effect is not good, and after many cleanings, the print head correction is invalid, it means that the ink cartridge has to be replaced.