If your razor isn t sharp, is there any good way to do it?

<> shaver is very necessary, but the electric shaver as an electric knife, it is very easy to become dull after a long time, once the head becomes dull, there is a low shaving efficiency, the situation of clamping the beard, such a situation, basically the shaver reminds you that you need to change the blade, but it is not cost-effective to change the blade frequently, and it is more troublesome, today's article will teach you a few tips, prolong the use of the razor, let's take a look if you can use it!

First: cleaning method, the razor head becomes difficult to use, it may not be all the case that the cutter head becomes dull, or it may be that the stains on the cutter head affect the use of the cutter head, so you need to clean the cutter head, before cleaning, you need to prepare some necessary supplies, you need a small bowl, a little white vinegar, some water, and a toothbrush.

First of all, open the protective net of the shaver, remove the blade, then pour white vinegar and water into the bowl, when the blade is put in and soak for ten minutes, soak for ten minutes and then gently scrub with a toothbrush to brush off the broken beard and stains on the surface, and finally rinse with water and dry it and put it in the base of the shaver and install it.

Second: grinding method, grinding the shaver does not need to remove the blade, to do grinding you need to prepare a few pieces of tin foil, to thin tin foil, can be wrapped in chocolate or the layer of silver paper in the cigarette box. The foil wrapped in chocolate may have chocolate crumbs and should be cleaned before use, while the foil in the cigarette case needs to be soaked in water to remove the layer of paper behind the foil, leaving only the foil.

After preparing the tin foil, first use scissors to cut the tin foil into pieces, do not cut very broken, in the size of the hand can be pinched, disassemble the protective net of the shaver, put these tin foil crushed on the top of the cutter head, and then buckle the protective net and start the shaver, the cutter head will rub against the tin foil, play a role in grinding.

After sanding, remove the protective net and pour out the broken tin foil, at this time, the cutter head will be sharper after grinding, and it can continue to be used for a period of time. The above are some tips to prolong the use of the cutter head, although this method can play a certain role, but it can not make the cutter head as sharp as the newly bought, when it is necessary to replace, we still have to replace it in time.

If your razor is not sharp, you can buy a razor again, or change to a razor blade of the same model, if you don't want to change it, then take the shaver apart to see if there is any blockage inside, or what.

You can remove the blade, take a small bowl, mix it with white vinegar and water, soak it for a while, and brush it clean with a toothbrush, it will be much better. It can also be sanded with tin foil to sharpen the razor.

The razor is not sharp out of the workaround:

1. Apply wind oil essence.

After using the razor or small spatula, remember to rinse it with clean water, then take a cotton swab dipped in some wind oil, lightly coat the surface of the knife, and then use a hair dryer to gently dry it, remember not to leave water on it. This not only protects against oxidation, but also prevents the growth of bacteria and prevents the blade from becoming dull.

2. Rub with jeans.

The jeans themselves have a certain amount of friction, and the razor or small scraper is not sharp enough, but we are going to use it now, so try to make a few strokes on the top of the jeans in one direction, and then remember to make a few strokes on the other side as well, and then you will find that the dull blade is much sharper again.

3. Apply toothpaste.

Apply a layer of toothpaste to the grille of the electric shaver and cover it evenly. Start the razor after application, let it idle for two or three minutes, rinse the toothpaste well, and use this method every once in a while to maintain the blade, and the razor will be as sharp as the one you just bought.

Profile of shavers:

Beard shaving utensils. It is a self-serving tool and is mostly used by adult men. Razors can be divided into three categories: safety shavers, electric shavers, and mechanical shavers according to their structure.

In order to guarantee the shaving effect, it is best to choose a high-performance alkaline battery for dry electric shavers. If it is not used for a long time, the battery must be removed to avoid damage to the internal parts due to battery leakage.

The blade can be replaced if the head of the electric shaver is not sharp, taking the Philips shaver as an example, the operation method of hail is as follows:

<>6. Turn off the cutter head, and the blade of the Philips shaver will be replaced.

Here's how to fix it:1. First open the head of the electric shaver and use a small brush to brush the residue on it.

2. After brushing clean, take out the toothpaste we often use and squeeze the toothpaste into the blade of the knife head.

3. Don't put too much toothpaste, too much will overflow the sleepy shirt and it will be difficult to tidy up.

4. Then install the shaver, turn on the switch and let the shaver pass autobiome for a while, about a minute.

5. Remove the head of the shaver again, rinse it with water, then dry it with water and wipe it clean with a dry cloth.

Note: Never rinse the shaver body with water to avoid water ingress into the battery and wiring. Wipe clean with a dry cloth to avoid any remaining toothpaste that will solidify on it.

6. Wipe it clean and install it on the test, and the fast ruler is as round as it was at the beginning.

The blade can be replaced if the head of the electric shaver is not sharp, taking the Philips shaver as an example, the operation method is as follows:

<>6. Turn off the cutter head, and the blade of the Philips shaver will be replaced.

If your shaver is powered by a battery, you can put toothpaste in the rotating head, reverse-connect the battery, and let the motor be reversed, so that the cutter head rotates for a while, then clean the head, and then connect the battery forward, and your shaver will become very sharp. If it is not battery-powered, you have to change the cutter head.

The electric shaver is not sharp and does not need to be changed, teach you a method, the head is better than the new one.

I can only replace it, go to the mall and buy a few new cutter heads for replacement.

Hello dear! What should I do if the electric shaver head is not sharp? The electric shaver head is not sharp due to the following reasons:

1.The cutter head may be too hard, and it is easy to cause problems such as aging and wear when used; 2.The electric shaver may not have enough oil film protection for the first time, so that the head friction is greater, and it will become less sharp over time; 3.

When an electric shaver is used, it may be customary to hold the head down, which will also cause the blade to become less sharp. Solution(s): 1

Replace the cutter head in time to ensure that the electric shaver is used on the new cutter head; 2.Apply nail polish, brush oil or other protective lubricants well before use to reduce the frictional resistance of the cutter head; 3.When using an electric shaver, slide the head from side to side instead of holding it down for a long time.