Acer heat dissipation problem, Acer notebook heat dissipation is super poor, what should I do?

There should be no problem, you can monitor it with z**, I've been using Acer as well.

If you are not at ease, you can buy a cooling base, which is very cheap, about 20-30 yuan, to help it dissipate heat.

If it is higher than 60 degrees, it is recommended to take it to a specialty store. Cleaning may be required or heat dissipation fails.

Don't use it too long every day, and it's best to take a break every 4 hours.

This phenomenon must be caused by a lot of dust in the fan, and the fan is cleaned about once every 3 months. Especially in the summer, this is going to be sinned, and it is recommended that you clean up the dust frequently.

Just a few screws, you can clean it by unscrewing it, bold and careful.

If you don't have the ability to do it yourself, go find a repairer. Estimated for 50 quick bucks.

It's normal to come to May Day, it's generally okay if it's not 75 degrees, I don't think I have to worry too much about heat dissipation, how fierce is the competition now, if something really goes wrong, everyone will collapse as soon as it is passed on People are so big that manufacturers can't even solve the heat dissipation So don't worry too much I bought Toshiba's These manufacturers will never let your book have problems during the warranty period.

Air outlet from the bottom heat vent? That's not right. Is it blocked by the air outlet on the upper side.

The wind is blowing. Let's clean it up. Mine is also Acer's.

To be honest, I regret it. Buy this brand. It can be described as a mix trash.

It's not a big problem either. It's t m d's trouble. Good luck!

For laptops with poor heat dissipation, you can use the following strategies to deal with them:

1. Disassemble the laptop and remove the dust, replace the cooling fan and CPU silicone grease;

2. Buy and use a suitable radiator base, if there is no condition, you can also use 4 bottle caps to raise the four corners of the notebook to ensure ventilation and heat dissipation at the bottom;

3. Optimize the startup items, do not start some programs that are not used or are not commonly used, and try to close some programs that are not used to reduce heating.

It is difficult to determine, the most common reason for this failure is that the fan is too dirty, the shaft mud is too much, it can't rotate, the lack of heat dissipation silicone grease, etc., find a professional to disassemble the machine, clean the fan and add lubricating oil, 90% of it is dirty; The second situation is caused by the damage of the fan itself, which needs to be replaced, and there is no way to repair it; Third, the failure caused by insufficient power supply on the motherboard or damage to the temperature control chip requires repair of the circuit and replacement of the chip. Notebook hardware questions answered.

My 4755G heat dissipation self-feeling is not bad,The temperature of the heatsink without playing large games is basically around 70 degrees,A situation like yours may be a problem with the module,It is recommended to check it after sale。

The exhaust radiator can effectively solve the problem of laptop heat dissipation, go to **Store Name: 80 Home Studio Take a look. This heatsink can be reduced by about 15 degrees for games and 15 to 25 degrees for gaming. Talk to the owner about the discounts.

Then buy a radiator and try it.

Buy a U-port cooling pad and try it.

Use a better radiator.

I bought an Acer laptop with bad heat dissipation and always shut down Buying a radiator will alleviate this situation, try not to leave the computer on for too long, and don't put it on the quilt, it affects the heat dissipation very much There is also a display screen, vhzxre

Brother, it's very hot in summer, and the laptop doesn't have a host processing fan as strong as a desktop, so you will use it, and the effect of using a cooling fan will be a little better, or it will have an impact on the environment in which you use the notebook, and the notebook fan is most afraid of dust, remember!! A little dust, the heat dissipation is not good, and then you can hear the fan blowing, and the panel is still very hot, and mine is the same.

It can only be said that Acer's notebook is slightly worse than some other excellent brand notebooks in terms of heat dissipation control.

But it must be said that it is not good, and I personally think it is not objective.

If it was really "bad", it would have been eliminated by the market long ago.

I also have an acer laptop, and there are some that don't have good heat dissipation, but I think it's acceptable. It would be much better to get a fan base.

It may be that there is too much consideration in terms of cost and cost performance.

1.If it's an old computer, take it apart and clean up the dust yourself;

2.If it is a new computer, you should check the heat dissipation performance of the machine before buying it;

3.If the heat dissipation of the computer you have already purchased is still not good after cleaning the dust or the new computer you have already bought, you need to have a cooling base that is the right size, has good heat dissipation and is relatively quiet.

4.In terms of software, the system is restored with one click once a month to reduce the CPU load and reduce heat generation;

5.By the way, Acer's weakness is heat dissipation, and the new *830 series is preparing to start, see if there is any improvement, I believe there will be progress.

Clean up the dust in the fan thoroughly, and then add special lubricating oil to the fan shaft core, you can solve the problem, in Beijing, on the spot.

I want to clean up the fan, if you haven't cleaned it for a long time, the effect will be very obvious, just like me, the notebook has been used for 3 years now, and it has not been cleaned, and the dust in the fan has just been cleaned up recently, and the temperature has dropped from more than 70 degrees to more than 50 degrees, even if you run the 3D software, the highest is 75 degrees, and I turned on the 3D software for a while to go up to 90 degrees.

Buy a cooling base, the temperature will be a little higher in the summer.

Laptop playing games is not the best choice,Heat,Because the heat dissipation space is small,The higher the configuration, the greater the heat,It's normal to play a big game at seventy or eighty degrees,The landlord went to **Find Xu's father and son DIY's 009 heat dissipation bar,Customized,120 or so,Exhaust heat dissipation,It's much more powerful than the radiators on the market。

1 Acer's heat dissipation is still the second best among HP, Lenovo and Dell.

2 The hot laptop is nothing more than buying a radiator, and the radiator is also good and bad, and the cool one is pretty good.

3 It is relatively better to use a laptop in an air-conditioned room.

You can find a software to see if the CPU temperature is too high, please go to the specific operation""Examine.

Make sure that the fan outlet is not blocked by dust.

If you can touch the heatsink and be sure it's cold. That could be due to the following reasons:

1. If the heatsink is at the same temperature from directly above the CPU to the fan outlet, and it is cold, it means that your CPU is not in full contact with the heatsink. It is recommended that you add gaskets or silicone grease, depending on the actual situation, and add what is missing. (It could also be that the screws are not tightened).

2. If the heat sink is hot directly above the CPU, but the air outlet is cold, it means that the heat pipe of your heat sink is leaking. It is recommended to try a different heat sink.

3. It is possible that the CPU is broken. To change. (The probability is very small) 4, it may be that the temperature control system of the motherboard is broken and needs to be repaired. (The probability is relatively small).

In fact, the heat dissipation configuration of the notebook is the most relevant, and the 6930 itself is a high-end configuration, and the heat of the graphics card is very large. It's a top-of-the-line graphics card after all.

Personally, I think DIY is very good, add a heat sink into it, and the 16-inch space inside itself is very large, which is very suitable for making a heat sink. That's much more useful than buying a cooling base, not to mention that buying a base will seriously affect the quality of the game, because it's not very stable.

In addition, I would like to ask, have your systems been changed to XP?

Vista's heating is much larger than XP,And it consumes more system memory,The system comes with a lot more things than XP,If you don't change the system,It is recommended to change to XP,If you really don't want to change,Try to minimize the program to run the machine,To improve the running speed and reduce the heat。 In addition, the upgrade configuration is also one thing, expanding the memory to 4 G, speeding up the operation of the machine.

In fact, you can take apart the machine at the right time to see, 6930 is very easy to disassemble, compared to the previous ACER mold is much easier to dismantle, about three months to do fan and other heat dissipation cleaning, the more dust accumulated on the fan, the slower the fan speed, the greater the heating, and it will also affect the life of the hard disk.

Otherwise, you will really have to go into an air-conditioned room.

Looked at your question.

Problem 1: Acer notebook heat dissipation problem.

Answer: The heat dissipation of Acer notebooks has been known since ancient times, and so far Acer notebook manufacturers have not been able to solve this problem, from the AP series to the TM series, so you can only endure the heat like this.

Solution. Option 1:

Remove the keyboard film, remove the screen film, and buy a heat dissipation base with three to four fans, which can reduce the temperature appropriately, and generally if you do this, the temperature can be controlled between 50-55 degrees.

Plan 2: Buy an air conditioner, when using the laptop, turn on the air conditioner at 20 degrees, and use the bottle cap to pad the notebook, so that the temperature can be reduced by about 50 degrees.

Solution 3: Make a hole in the bottom plate of the notebook and change the bottom plate of the notebook fan to the iron sheet, so that the heat dissipation can reach 50 degrees. (PS: If you make a hole in the bottom plate of the notebook, you will automatically lose the warranty treatment).

Thank you for your support! If you have any questions, you can continue to ask!

1 All Acer notebooks are cheap for several reasons:

1. The brand of Acer is cost-effective, which is its characteristic. Generally, with the same configuration, Acer is definitely a relatively cheap one, even if it is not the cheapest one.

2. Acer's notebook mold is very simple. Almost all Acer notebooks are like that, and compared with Lenovo and Asus, its mold costs should be more economical.

3. The management team of Hongji company is very streamlined, which is a model in the industry, and their business philosophy is to outsource all the outsourcing, not only production outsourcing, but also channels and marketing are outsourced. At least that was the case many years ago, and I don't know much about it when my university teacher gave a lecture.

4. Have you noticed that among the major notebook brands, Acer's advertising is relatively the least, and the advertising fee must be finally calculated to the consumer

As for the specific model, what are you mainly emphasizing? What level of performance should be achieved, whether portability is required, and whether appearance is required.

It's about the same price and the quality is still good My first notebook is Acer It's good and affordable than other brands including domestic or non-domestic really.

The online ** is on the low side, the quality of Acer is still okay, and I use it now. I feel that Acer is very good value for money, so it has a lot of fame in Europe.