Can I access the Internet directly after the system is reinstalled? Do I need to pack anything? Ghos

It is recommended to install the Ghost XP system.

Main steps to install a new computer system:

1: Set your computer to boot on the optical drive.

2: Put the disc you want to install.

3: Enter DOS (After entering DOS, the wordmark of A: will appear, and in A:

Type format c:, which means to delete the files of the C drive, the so-called formatting. Press the enter key after typing,At this time, a prompt will appear,Ask if you are formatted,Enter y,That's it)Note: It's best not to put your main files in the C disk and D disk,Copy the important files out and do the above operations。

4: After formatting, start the computer. After opening, you will automatically enter the interface, and follow the Chinese prompts on the screen to do it.

If the installation is still prompted and the problem is solved, if you will partition under DOS it is better to divide it under DOS so that you can divide your hard drive into the size you want. If it is not advisable to install the system from the new partition with a quick partition it is ok.

Done, good luck.

Internet access must have a network card, network cable, Netcom or telecom dial-up terminal, cat.

or network cards, network cables, routers (sharing broadband with others).

In this way, you have a good copying system, and then you have broadband and you can access the Internet.

If you are dialing by ADSL, you need to create a dialing setting.

If you use other software to log in to the network, you need to install the corresponding software.

If you can't access the internet, you'll need to install the driver

If there is a wireless router and another computer can access the Internet normally, then this computer does not need to set up anything, just pay attention to the computer network card parameters set to the automatic acquisition mode, and then connect to the router with a network cable to use it directly.

Is it a personal computer? Then open the online neighbor, check the network connection, create a new connection, connect to the Internet, manually and use the password, give the connection a name, enter your account number and password, and that's it. But you must remember your account number and password, which was given to you by the company.

You don't say how you go online. Depressed.. If it is an adsl dial-up, you need to install the driver. If you don't need a modem like me, it's direct. Create a new connection. Enter your username and password.

Under normal circumstances, the computer can automatically access the Internet after reinstalling the system.

If you are using a **server, you can build a local connection by yourself.

Other ways to access the Internet have been introduced upstairs.

I won't repeat it.

It's OK to install the cat's driver.

No network is required to reinstall the system. The system can be installed by following the steps below:

1.Buy a win7 disc and put the system disc into the CD-ROM drive.

2.Turn on the power and then observe the on-screen prompt to press "F2" for BIOS settings before booting the system.

3.Set the startup mode. Find the boot option, there is the first boot, generally 1st boot device, move the cursor to it, press the enter key to go in and select the item with the word ***, press the enter key to confirm.

4.Some of the key methods for moving the cursor are the arrow keys of the keyboard, and some are f5 and f6, which are prompted by the screen. Then press F10, select Yes, press Enter to confirm, and then the computer will automatically restart.

5.At this time, boot from the disc when starting, enter the installation system interface, follow the system prompts, step by step, and the installation process will be restarted many times.

The next 360 reinstall software does not require an internet connection.

No, just a CD-ROM drive or USB flash drive. Run the installer and load the ISO instead.

You can use the system reinstallation function in 360 Computer Expert, which is very convenient, requires a network, and will be automatically reinstalled in about 40 minutes.

"Can I reinstall the system myself? ”

Of course, you can reinstall the system yourself.。。 A computer is like a piece of your own land, and a system is like a house. If you build a house on the ground of your own house, of course, you should build it if you want to, and if you think the house is not good, you will dismantle and rebuild it, that is, change the system.

What is ghost"

Ghost is a backup and restore software for hard drives, which is very easy to use. Now there are a lot of ghost discs on the Internet.,Not to mention the principle.,The role is that you don't need to reinstall the system when you install it.,But restore the system backed up with ghost to the computer.,It's very fast.,And now the technology is getting more and more mature.,The system driver of the recovery can basically be played all.,And it's also quite stable.。

In addition, we can also use ghost ourselves.,For example, the newly installed system.,Use ghost to make a backup.,Of course, one day when the system has a problem, then use ghost to restore the previous backup.,You can return to the initial state before your backup.,It's very convenient.。。

Word by word. Let's give some points.

ghost can be said to be a system image, or it can be said to be a system backup tool. The ghost system image is installed by decompressing it to the system disk with the ghost tool, and then it can be backed up with the ghost tool next time without reinstalling.

Put the system disk in the CD-ROM drive, restart it, press 1 and wait.

1.Software may fail: after the operating system version is upgraded, it may also lead to ADSL not being able to access the Internet, which is mainly manifested in the fact that the newly installed system cannot access the Internet after updating the supplement after updating the various drivers, and can access the Internet without updating the system patch.

Solution: The most Lu Luchen is better to change the version of the operation disc and reinstall it once in the morning.

2.Hardware failure: If the NIC is faulty or the NIC driver is faulty, you can replace it with other NIC to check it.

3.Other equipment: cats, network cable failures, replace the test.

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to cut off the router bend with the source plugged in, and I'll take a look. In there is a factory reset, it can be used from the new settings (this is under the premise of the correct physical connection, sometimes caused by the router's slow or failed IP address search, not that the router is broken). Roll high.

If it can't be solved all the time, it is recommended to call the customer service of the router, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they gave, and they will give the correct advice for your settings or operations.

3) If you turn off the wireless switch, turn it on, if it is connected with software without a large size line, it is normal for the software to be not easy to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

Use the system that comes with the system restore method:

System Restore that comes with the system: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore (win7810 restore the system, right-click on the computer to select attributes, on the right side to select system protection, system restore, follow the steps to do it, if there is restoration software, you can also use the software to restore the system).

5) If you have any questions, please ask me.