How to crack PR 200, how to crack PR

It's really hard to install, some are easy to use, and some need to be activated in two days. Save your wasted time and do something meaningful. I need to save it directly

The latest complete Chinese 2018-2021 are available, and I have tried several versions without experience, and they are all kinds of errors. I found a few versions and couldn't use it.,Fortunately, I finally found this.,At present, everything functions normally and quickly self-picked.

There is no need to crack, they are all versions that can be used permanently after installation, and the link is shared with Gurney

There is a serial number when installing, copy the serial number, open the cracking tool, paste it inside, and the activation code will be obtained after confirmation, and put the activation code into the activation code that the PR installation requires you to fill in.

It's hard to find, but I still found it, and I tried several versions without experience, and they were all kinds of errors. In the end, my friend helped me install this set before I realized what the real powerful function is, and the Chinese can also be upgraded and need to save it yourself.

It's still relatively easy to use, much easier to use than many in China, and many of the Internet need to be installed off the network, which is very troublesome. I found a few versions and couldn't use it.,Fortunately, I finally found this.,At present, everything functions normally and I pick it up below.

Theoretically speaking, there is not much difference between the PR cracked version and the genuine version in terms of functions, but it should be noted that the PR of the cracked version is not protected, while the genuine PR is protected, and if you encounter any problems during use, you can also contact Adobe directly.

2PR Useful Shortcuts.

CRTL+K, shear build.

CRTL+SHIFT+K, all track cuts.

Press Q W to corrugate and shear, and it will be automatically aligned.

ALT+CRTL swap positions.

CRTL+D is the default transition.

PR usage tips.

1. Flash white. When making a clip synthesis program, instead of directly using white frame dissolve, you should make a simple animation by increasing the gamma and brightness on the original material, and then dissolve, so that the bright part of the picture will be white first, and then the whole picture will be white. It feels like an optical change, not monotonous, and it's better to keep something faintly visible even at the whitest time, that is, not to use pure white monochrome.

2. Cut. When compositing, use 1-2 frames of dissolves instead of simple cuts, and the transition will be smoother.

3. Picture color.

Try to avoid pure black and pure white in the picture, even if it is black, and use red, blue, etc., which are pressed to a very dark level, which will make the overall color more harmonious, and the overall tone will determine the specific tone. If you feel that ** is not bright enough or dark enough, try to avoid the absolute method of brightening or reducing the overall light, and replace it with a relative method such as increasing the area and proportion of the bright part. Use the Curve tool to make it easier to control adjustments in parts of the picture.

For the texture of metallic luster, the main principle is "gold is not afraid of black", that is to say, there must be a dark part in the production of metallic texture, try to use moving lights to create a flowing highlight effect instead of a reflection map, and you can use negative lights to create dark parts.

4. Composition. In addition to the expression scenes such as seriousness, authority, and power, asymmetrical composition is used as much as possible; Try to consider the composition from the perspective of production, editing, and cohesion, and don't be too obsessed with single-screen composition. It is very difficult to compose a single lens with the aspect ratio of a TV, and when composing a picture, we usually consider not only the hail part shown on TV, but also the dynamic three-dimensional composition that changes in time and space.

5. Sound and picture.

For ambient sound, it does not have to correspond strictly to the production and editing of the ** picture, generally speaking, the ambient sound is in and out first. It is better to stagger 1-2 frames according to the waveform and the clipping points of the picture, and it is better to feel it with your eyes and ears, and not to be too obsessed with the consistency of the waveform and the clipping points. Sometimes you need to consider that the ambient sound of the sound coming to your machine may have a slight delay than the "ambient scene", and we need to pay attention to this for some large scenes of live recording and post-production, after all, the speed of light is very different from the speed of sound.

<> operating ruler Song square hand trapping method is as follows:

1. First of all, right-click the [PR 2019] compressed package and select the [Extract to PR 2019 (must win10, the rest of the system 2018)] folder.

2. Then double-click to open the unzipped folder.

3. Right-click [set-up] and select [Run as administrator]. Note: Usually the software installation time suffix is. The exe is the installation package, which can be installed with a click.

4. Then the installation location can be under the C disk or other disks (it is recommended not to install it in the C disk), if it is under other disks, you need to create a new "PR2019" folder (Note: the folder name of the Bib installation path cannot appear in Chinese).

5. Click "Location" - "Change Location" - select the "PR2019 folder" you created, confirm the selected location, and click [Continue].

6. The software is being installed (it takes about 2 minutes to wait).

7. After the installation is complete, click [Close].

8. After closing it, you can see the [Adobe Premiere Pro 2019] icon on the desktop of your computer.

2.When installing, remember that it must be first: try to install, and then register to enter.