-
Run msconfig, remove some unnecessary startup items in the startup items, like mine only leaves a Kaspersky, right-click on my computer, properties, hardware, in the device manager, there is an IDE controller, drop-down, there is a minor IDE and a major IDE channel, right-click on properties, advanced settings -> transfer mode, main channel: Device 0: changed to DMA, device 1:
Device Type: None, Conveyor Mode; DMA if available.
In the same way, secondary channels do the same
-
The next optimization software, and then slowly study it yourself, will not be slowly told to you.
-
The easiest and fastest is to use 360 boot optimization and acceleration Another is to close the idle IDE channel in the device manager Everything else has little effect You can try it.
-
Reduce the number of programs that start when your computer is turned on.
QQ Software Manager and 360 Security Guard have settings inside.
Don't boot up any programs you don't need.
The rest is just hardware. If the computer configuration is low, the speed will also be slow.
Also, if it is a Vista system, the speed will be a bit slow.
-
There are many reasons why a computer boots up slowly.
My experience is this:
1. There are too many startup items, solve: turn on the computer, start - run - enter msconfig - close the unwanted startup items (only keep the input method and antivirus software); ps:xian86913
2. The computer has been used for a long time (solution: regularly clean up the computer dust, generally once a year, use the ordinary once a year, if you don't clean it well, send it to the computer company to clean up about 30 oceans); ps:xian86913
3. There are too many viruses or garbage in the computer. Solution: The computer should be equipped with antivirus software and software assistant similar to 360; Regularly check for viruses and clean up system garbage, etc.; ps:xian86913
4. Try to put as few files as possible on the desktop, which has a great impact on the startup; ps:xian86913
5. If two anti-virus software are installed, only one anti-virus software can be installed on one computer; ps:xian86913
6. If the system file is wrong, use the partition check and sorting tool that comes with the system to check and sort. Go to the Start Menu >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >>
D disk), hard disk fragmentation with the system comes with the line, for bad sectors, you can use the hard disk bad sector test repair software test to determine the existence of repair, repair.
7. Turn off the system updates that come with the system. ps:xian86913
If it's slow, it's a problem with the configuration of the computer and the network operator] ps:xian86913
If none of these can be solved, your boot time is still very long, and there may be some hardware problems.
It is recommended to find a professional or computer after-sales service to solve the problem.
-
Oh no, I used to do the same, just reinstall the system.
-
It looks like there's a lot of stuff in the C drive.
-
You can try adding the IP address to the network card in the online neighborhood.
-
360's boot time assistant!?
You can just take it as a joke, there's no need!
That one doesn't have any credibility at all.
-
You 360 has recently been upgraded, and its algorithm has changed, and it is more accurate, so it's not a problem.
-
The general boot speed is 56 seconds, and it is 53 or 54 when it is also 54, if you are forcibly shut down, you will have more time, if you are a normal shutdown time, it will be relatively less, and if you are less, it will be 53
If it is more, it is more than 1 minute, and if you think it is good, you will get extra points.
-
Have you installed software recently, and if so, it may be a program that automatically loads the software.
-
It is recommended that you reinstall the system,Reinstall the software you need,Pay attention to the software installation to be organized,Don't put it randomly,I think it's better to install it on the D disk (change C to D when installing) You may be because the software is installed everywhere,Not organized,And I think it's enough to install the 360 series,If you're just using the computer ordinarily,What software to use depends entirely on your personal hobbies,I hope it can help you Thank you。
-
1. You can start - run - hit the msconfig command to close some random programs that are not required to start in the startup. See if there is an improvement. 2. Specify a fixed IP address, which may also improve the power on/off.
3. It may be caused by a virus, you can try to update the antivirus software version and conduct a comprehensive antivirus to see if it can solve this problem. 4. If there is still a problem after the above operations, then it is recommended that you save the important files and reinstall the operating system.
-
Boot-run-msconfig to remove redundant startup items or install an optimization master, 360 security guard cleanup plug-in, boot acceleration has a one-click optimization, there is a reference startup in the service that can be banned, if you don't use the printer, the printer is banned. It's best to run in safe mode Hope it helps you.
-
My useless boot startup item is disabled!! Clean up the garbage!!
-
How to increase the boot speed by setting.
You start by using the IE Repair tool.
And then you have a multi-window browser, and you can just search for it, and there are a lot of them, and I use "maxthon" right now"Personally, I think it's still easy to use, and even the ** ads can be blocked to prevent him from appearing on your computer. >>>More
The graphics card upstairs has not been sold for a long time, and I was lucky enough to buy a very good one, and I couldn't find it when I bought it again. Now there are only the super shrunken v2 and v3 versions, and the shrinkage is miserable! >>>More
cpu amd 4000+ 410
Motherboard Yingtai TA690G AM2 within 550 (I have done this brand before, and the T series is OK). >>>More
Power supply! It's better to use Kangshu, and it's better to use 450w. >>>More
Let's talk about your configuration first: if the E8400 is not overclocked, then there is no need to use bulk, and buy a separate heatsink. If you want to overclock, then the motherboard must be replaced with a P45 motherboard. >>>More