How to record a computer system to a CD ROM

How to burn a system disk (optical boot disc).

Burning system discs is simple, but there are certain requirements and precautions.

1.First of all, it is necessary to have a recorder (cd-r rw or ***-r rw) to install the burning software, it is best to use the software that comes with it randomly, most of them are now (nero 9) if there is no one available from the Internet.

There are also those that do not provide MD5 values. ** file (the system is equipped with a compressed file manager) it is the appearance of the compressed file, if other iso software is installed, the appearance of the file will change, such as ultraiso will become a small disc like. (XP2 system).

3.Some ** provided ISO files need to be processed, according to the requirements of the software provider, some need to be unzipped, some need to be renamed, (directly change the name can not be changed need to be in the compressed file manager.)

After processing, it should be a standard ISO file, and a copy should be made for insurance and stored in other disks before processing.

The file is ready, now start engraving:

Double-click the nero icon and click (burn the image to the disc) to appear (Open) dialog box, find the file (it will not be displayed if it is not an ISO file), click on the file and then click the (Open) button. The (Image Burning) dialog box appears, at this time, the ISO file has been selected in the (Image File) column, (Destination Drive) is also selected, (Number of Burned Copies) is selected, (Check the disc data after burning) is checked, and the recorder inserts the CD-R blank disc, wait. Write speed) column is lit, set to 24x or lower, click (next) to open the engraving, and the disc is burned successfully after verifying that the data is correct.

5.To engrave a CD-R disc, the file size should be less than 700MB, and the current CD-R blank disc on the market is labeled as 700MB but is actually 702MB. The nominal 730MB super engraved disk is also 702MB, and the engraved system disk should be selected as a better disk, please pay attention to the choice.

6.On the issue of burning speed, some people say that slower engraving can be engraved deeper, and the storage time is longer, I don't know if it's right or not. I used 40x to engrave, which is also very good, but various file providers require slow burning, which seems to be slower and safer.

Install the next nero 9 and burn it with an image.

Just use a clone.

1. Open the folder you want to burn, select the file you want to burn, and click the "Burn" button in the toolbar.

2. Click "Burn to Disc" in the newly opened burning window

3. Pull the newly opened burning cover into the disc window, enter the name of the disc you want to name in the disc title, and then go to the next step.

4. Enter the burning progress interface, the longer this step will be, the larger the data, and the longer it will take.

5. After the progress is completed, the system will prompt you to burn the file to the CD, we click Finish, and then the CD will automatically pop up the burned CD, and your CD will be burned!

The steps to burn the contents of a disc to your computer are as follows:

1. The first step is to prepare the optical drive, computer, and CD. If you don't have an optical drive, you can get an external optical drive.

2. The second step is to open the optical drive and put the disc into the optical drive.

3. The third step is to turn on the computer, and after the computer window pops up, you will see the device "*** drive" with removable storage.

4. Step 4: Click to open the "*** drive" of the device with removable storage. Then another window will open with all the file contents of the disc.

5. Step 5: Right-click and select the file you want to copy.

6. Step 6: Create a new folder on any disk of the computer and name it "Disc Files". Put the copied disc file in it.

This completes the operation of burning the contents of the disc to the computer.

You can extract the disc file with a floppy disk, and select "Make Disc Image" in the menu.

1. Insert the disc into the computer CD-ROM drive and wait for the CD-ROM drive to read the CD contents.

2. Select "My Computer" on the desktop and right-click and select the "Explorer" option.

3. After opening, you can see the contents of the disc by left-clicking the single-disc drive letter on the right.

There are two scenarios at this point:

1. The contents of the disc can be copied without encryption, directly select all the contents with the mouse or Ctrl+A to select all the contents, right-click to copy or directly Ctrl C to copy, and then open the location you want to save on your computer and click the right click to paste or directly Ctrl V to paste.

2. Some software of the disc is encrypted, so it can't be copied with the above methods, so we can only use third-party software to crack it (think about it ourselves, hehe).

Summary: It's best to be copied, and it's not recommended to crack it if you can't copy it, please respect the fruits of others' labor!

After inserting the disc into the optical drive, turn on my computer, right-click on the icon of the ***-ram drive - open, and then select all to copy to the computer, do not use the double-click to open the way, because sometimes it will become automatic.

After placing the disc in the optical drive, right-click to open the optical drive, find the file you want to copy, and copy and paste.

Determine whether there is an optical drive, if there is an optical drive to read directly, open and select copy, and then select paste, and wait for the completion to be OK.

Open the contents of the disc, select all and copy them to the hard disk.

This is very simple, open the CD-ROM drive, and then select the corresponding content to copy and paste.

Click on the drive disk. And then it's like a normal file copy.

1.First of all, you have to understand that it is a disc image, which is a complete clone of the disc data.

2.Second, there are two kinds of burning, one is to simply get the file to the disc, which is equivalent to copying things to a USB flash drive, the difference is that it can't be erased after copying; The second is to burn the disc image to the disc, which is the reverse process of cloning the disc to get the disc image; (Copying a disc to a disc image file is positive, burning the image file to the disc is reverse).

3.In this case, you burn the disc image, which is the second type. I generally use ultraiso, he can burn the disc to the disc mirror, the engraving is bootable. Bootable is what you said you can install when you put it into the optical drive.

4 If you are afraid of viruses and other reasons, you can also install a shadow system. If you get a virus, you can recover when you shut down and start it on, but if you install new software, the reboot is gone.

Use one key to restore or one-click ghost backup C drive into a GHO file, and then burn this file with a burner and software.

It's unrealistic.,The installed system can only be backed up as a ghost.,I've backed up almost 6G.。

Use one-click GHOST backup,Store it in a non-system disk,If you want to burn the disk,The next person pirates the ISO image of GHOST,Replace your own GHO,It's easy to burn with Nero or Ultra ISO。

Ultraiso floppy drive or nero can do it. The premise is that you buy an empty burning disk.

1.The operating system or, is a disc image, which is a complete clone of the disc data;

2.There are two kinds of burning, one is to simply get the file on the disc, which is equivalent to copying things to the U disk, the difference is that it can't be erased after copying; The second is to burn the disc image to the disc, which is the reverse process of cloning the disc to get the disc image; (Copying a disc to a disc image file is positive, burning the image file to the disc is reverse).

3.Burning the system disc image, is the second type, you can use ultraiso software to burn the image to the disc, the engraving is bootable, bootable is to put it into the optical drive can be installed;

4In order to prevent the virus, you can install a shadow system, if you are infected with the virus, shut down and start it again, but install the new software, the reboot is gone.