What should I do if the mobile Mobai box fails to access the server?

Open the Network Sharing Center, select Change Adapter Settings, then double-click the local connection, click IPv4, click Properties, and set it to automatically get the IP address to automatically get the DNS server address: then open the wireless network properties, and set the same as above. It should be fine.

Thank you! 1. Check whether the network is normal.

2. Make sure that the set-top box has no ordering relationship in the AAA system (call 4000136050 customer service for inquiry).

3. Restore the factory settings of the set-top box and re-obtain the username and password.

Press the Mobai Box remote control "Settings" - Device Information "- Enable Diagnostics".

Some mobile Magic Box users cannot start normally after booting up, and the situation of "90056 error reported for login failure" appears, as shown in the following figure.

Reasons for this problem:

1. The set-top box has been activated normally and the password has been obtained, but the current password has become invalid;

2. Due to network problems, the correct password was not obtained for the first boot.

Specifically, you can follow the workaround:

1. Check whether the network is normal.

2. Make sure that the set-top box has no ordering relationship in the AAA system (call 4000136050 customer service for inquiry).

3. Restore the factory settings of the set-top box and re-obtain the username and password.

Press the Mobai Box remote control "Settings" - Device Information "- Enable Diagnostics".

If a red error message appears in the first step, the network is abnormal or the set-top box network configuration is incorrect, and the network or network configuration problem needs to be solved first.

In the second step, if there is a red error message that the boot authentication failed, it can be determined that it is an activation problem and the ordering relationship is abnormal.

Summary. Cause:

1. The set-top box has been activated normally and the password has been obtained, but the current password has become invalid;

2. Due to network problems, the correct password was not obtained for the first boot.

Solution: 1. Check whether the network is normal.

2. Make sure that the set-top box has no ordering relationship in the AAA system (call 4000136050 customer service for inquiry).

3. Restore the factory settings of the set-top box and re-obtain the username and password.

Press the set-top box remote control "Settings" - Device Information "- Enable Diagnostics".

What should I do if the verification of the mobile Mobai box fails?

Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

Causes of the problem: 1. The set-top box has been activated normally and the password has been obtained, but the current password has become invalid; 2. Due to network problems, the correct password was not obtained for the first boot. Workaround:

1. Check whether the network is normal. 2. Make sure that the set-top box has no order in the AAA system (call 4000136050 customer service to inquire) 3. The set-top box is restored to the factory settings, and the username and password are re-obtained. Press the set-top box remote control "Settings" - Device Information "- Enable Diagnostics".

Hello, glad to answer for you. The reason why China Mobile's Mobai Box cannot connect to the Internet is that except for the Mobai Box and Migu Box in Guangdong, the upgraded Mobai Box can no longer connect to WiFi. Mobile Mobai Box is a network set-top box launched by China Mobile.

Similar to other TV boxes on the market, the mobile magic box supports**,**content resources**,It also provides some interactive games as a supplement. The mobile magic box is generally opened together with the mobile broadband service and is bound to the broadband**.

To set up a problem, perform the following steps:

1 Connect the TV to the cable that comes with the Mobai box, plug it in, and press the button on the back to turn it on.

2 Point the remote control at the Mobal box and press the "Settings" button.

3 On the settings page, permission verification is required. Use the remote to enter "10086" and press the "Back" button.

4 Press the " button with the remote control, move the cursor to "OK", and then press the OK button.

5 Go to the settings page, move your cursor to "WiFi", and press OK.

6 Finally, enter the wifi password in the remote control, move the cursor to "Connect", press the OK button, and the wifi connection is successful.

Hello, it is a pleasure to serve you and give you the following answers: Reasons:1

Network problems: Due to the unstable network, Mobai Box may not be able to access the homepage normally. 2.

Equipment problems: Due to the aging or damage of the device, it may cause the Mobai Box to be unable to access the homepage normally. Workaround:

1.Check the network: Check whether the network is stable, and if not, try to reconnect to the network or replace the network access device.

2.Check the device: Check if the Mobai box device is aged or damaged, if so, you can try to reinstall the software, or replace the device.

Steps:1Check the network brief:

1) Turn on the router and check whether the network is cracked and stable. (2) If the network is unstable, you can try to reconnect to the network or replace the network access equipment; (3) If the network is stable, you can continue to check the device. 2.Check the device:

1) Open the Mobai box and check whether the equipment is aged or damaged; (2) If the device is aged or damaged, you can try to reinstall the software or replace the device; (3) If the device is normal, you can continue to check the network. Personal experience: When encountering the situation that the Mobai box cannot access the home page normally, the first thing to check is whether the network is stable, if the network is unstable, you can try to reconnect to the network, or replace the network access equipment; If the network is stable, you can check if the device is old or damaged, and if so, you can try to reinstall the software or replace the device.

Tips:1Regularly check the network and equipment to ensure that Mobai Box can access the homepage normally; 2.

Try to use stable network access equipment to ensure network stability; 3.Try to use new equipment to make sure it is working properly.

1. Check whether the network is normal.

2. Make sure that the set-top box has no ordering relationship in the AAA system (call 4000136050 customer service for inquiry).

3. Restore the factory settings of the set-top box and re-obtain the username and password.

Press the Mobai Box remote control "Settings" - Device Information "- Enable Diagnostics".

If a red error message appears in the first step, the network is abnormal or the set-top box network configuration is incorrect, and the network or network configuration problem needs to be solved first.

In the second step, if there is a red error message that the boot authentication failed, it can be determined that it is an activation problem and the ordering relationship is abnormal.

It is recommended to turn the power off and on again, if the login still fails, it is recommended to contact 10086 for consultation.