Where does the housekeeper set the elevator password?

Open the Start button and find the Control Panel under your computer.

Once you click on "Control Panel" to open, find "User Accounts" and click on "Add or Remove User Accounts" under it.

Once clicked, find "Create a new account" and then click.

After clicking "Create a new account", you need to set up the following 2 steps: first, fill in the account name; Secondly – the choice of account type. The administrator account will have the highest permissions, please be careful with your settings. Once you've set it up, click "Create Account".

If you want to set the password of the elevator, you must first set it in the elevator program, and open the elevator repair box with some set programs.

That housekeeper still has set up the elevator password, and can still bring us better aspects of use, I think this is also very good.

Brother housekeeper** set up this elevator, you need a password to set up this elevator, their settings should be set in advance before they appear.

Now we still have a lot of elevator passwords, and we should still choose and set them through formal channels.

You only need to connect to the computer, and then connect to your elevator and change the password of the elevator on the computer.

The setting of this elevator password is the initial password.

As long as the housekeeper ** sets up the store, the password elevator password, I don't know how much.

Steward ** set the elevator password, I think the steward can directly set the elevator password.

So I said**Set the elevator password, this should be searched on the Internet, or look for his manual or something, or ask customer service in**Settings.

Housekeeper** Set the password for the elevator? I can set a password like this in that privacy.

Generally speaking, the elevator will not set a password, it is all public.

The password of the elevator is only available in the elevator factory, and it is set by the factory. General timeliness. If you want to change it to a long-term password, you have to ask the elevator factory.

Modern elevators are mainly composed of traction machines (winch), guide rails, counterweight devices, safety devices (such as speed limiters, safety gears and buffers, etc.), signal control systems, cars and hall doors, etc. These parts are installed in the hoistway and machine room of the building, respectively. Usually the wire rope friction transmission is adopted, the wire rope bypasses the traction wheel, the two ends are connected to the car and the counterweight respectively, and the motor drives the traction wheel to lift the car.

Elevators require safety and reliability, high conveying efficiency, accurate leveling and comfortable riding. The basic parameters of the elevator mainly include the rated load capacity, the number of passengers, the rated speed, the car profile size and the hoistway type.

I don't know what you want to do, are you an elevator company, the password of the elevator is only available in the elevator factory, and it is set by the factory. General timeliness. If you want to change it to a long-term password, you have to ask the elevator factory. Of course, the premise is that you settle all the payments with the factory.

I am an employee of Xizi Unaid, and the elevator adopts a high-efficiency and energy-saving host system, a safe and intelligent control system, and a reliable protection system for all slag fingers. The elevator is also installed in accordance with the standard track mounting system.

Since the question you asked is not very clear, I try to understand.

Landlord, you mean to segment the elevator operating time, for example, during the day from 6:00 a.m. to 9:00 p.m. and stop the rest of the time.

If that's the case, then the implementation is relatively straightforward, and there are two options:

1. The property owner realizes the key through the key.

The intelligent elevator management system is a partial transformation of the original elevator, embedding the smart card technology into it, and strictly certifying the personnel entering and exiting the elevator, so as to prevent idle personnel from using the elevator to enter and exit each floor at will. At the same time, the access information, status and other data of the elevator are recorded, so that the use of the elevator is well documented. For users who do not have a card, the system provides a variety of management methods, issuing temporary cards or being summoned by residents, and flexibly and humanely realizing elevator authority management.

At the same time, the system can be seamlessly connected with the visitor system and access control system to achieve a more stringent visitor management process. Each TV is different,Look for the manual,But generally it will be similar to the system settings,Look for the menu button on the remote control,Give it a try。 The intelligent elevator management system is a partial transformation of the original elevator, embedding the smart card technology into it, and strictly certifying the personnel entering and exiting the elevator, so as to prevent idle personnel from using the elevator to enter and exit each floor at will.

At the same time, the access information, status and other data of the elevator are recorded, so that the use of the elevator is well documented. For users who do not have a card, the system provides a variety of management methods, issuing temporary cards or being summoned by residents, and flexibly and humanely realizing elevator authority management. At the same time, the system can be seamlessly connected with the visitor system and access control system to achieve a more stringent visitor management process.

What you mean by segmenting elevator operating hours, for example, runs during the day from 6:00 a.m. to 9:00 p.m. and stops the rest of the time.

If that's the case, then the implementation is relatively straightforward, and there are two options:

1. The property owner realizes it by means of key lock ladder.

2. Software modification The elevator operation is controlled through the computer board, and the program of the stop time can be entered in it.

If before the elevator is ordered, such modification is free, if the elevator has been debugged, then it is estimated that the elevator company will charge.

We're the elevator floor of the hospital or something, I got it, and now it's to use the elevator programming remote control to set the password and time period control 1234 is okay with the time 6:30-23:30 computer home control and wifi control settings are the same as the elevator?

The elevator of my own hospital was set up when I was on duty, and whether the Schindler elevator in our U-square Plaza could be equipped with a card swiping device, with the consent and permission of others?

Find the settings in the electrical components of the control cabinet. Examples include frequency converters and PCB control panels.

Please ask professional elevator maintenance personnel to help you solve this.

Looking for a commissioner from an elevator company

It's a matter for professionals.

Table of Contents1 Introduction2 Table of Contents.

That's not as simple as you think.

You can go to i Butler - Software Management - Software Lock to add i Butler to set the password.

There is a start menu in the lower left corner of the computer, find the control panel after clicking the start menu, and finally find the user account after opening the control panel, open the user account to set the boot password, and this can only set the boot password for logging in to the desktop, at present, the computer manager does not have this function of setting the boot password on the computer.

Go to the control panel account management yourself to set it up.

If you want to set a login password, there is a password at the bottom of your login. Find out if there are any.

Please check that your computer has a firewall and anti-virus software enabled.

If it is already enabled, set up your firewall or anti-virus software to add the program to the applications that allow access to the network.

List. Generally, firewalls or anti-virus software automatically block access to the network by default, or you accidentally add a list of applications that should be added to the firewall or antivirus software to block access to the network. If you don't have a bad leak firewall, you can exit or turn off the firewall to fix the problem.

How to turn it off: Click the firewall icon at the bottom right, click "Right-click", select Exit, and then click OK. ）