Where to set up disk cache????

Right-click on My Computer on the desktop, then select Properties Enter, Properties dialog box, then select Advanced Options, then click on the Performance tab, click"Settings"button, then set your BT to the disk where it is located, and set its virtual memory to:"The initial value should be greater than 1000, and the maximum value should not exceed 4000", so that it will be much faster to use bt** things.

In the option Disk Cache.

1. First of all, restart the computer with a fixed hard disk, and press the F2 button on the keyboard while restarting.

2. Go to the interface of the BIOS and select the boot option in the title bar.

3. Enter the boot interface, you can see the order of boot at the bottom of the interface, and find the name of the SSD.

4. Then press the F5 or F6 button to adjust the SSD option to the first position.

5. After setting, press the F10 button on the keyboard, and then pop up a small window to exit and save, click the yes option here. Finally, the computer will reboot, and if the fixed hard drive is equipped with a system, it will start from the SSD first.

Here's how to set up your computer's cache:

1.Open the computer of this computer, right-click and left-click "Properties" in the pop-up menu options, as shown in the red box in the figure below;

2.In the system panel, left-click "Advanced System Settings", as shown in the red box in the figure below.

3.Click the "Settings" button in the advanced menu of system properties, as shown in the red box below;

4.Click "Advanced" in the performance option box, as shown in the red box in the figure below;

5.Enter the operation interface and click the "Change" button in the virtual memory, as shown in the red box in the figure below.

6.In the virtual memory box, uncheck "Automatically manage the paging file size of all drives", as shown in the red box in the figure below.

7.Continue to customize the size under the free space, as shown in the red box in the following figure;

8.To complete the customization, click the "OK" button below, as shown in the red box in the figure below.

Here's how to set up your computer's cache:

1.Open the computer, right-click and left-click "Properties" in the pop-up menu options, as shown in the red box in the figure below;

2.In the system panel, left-click "Advanced System Settings", as shown in the red box in the figure below.

3.Click the "Settings" button in the advanced menu of the system properties, as shown in the red box in the figure below;

4.Click "Advanced" in the performance selection box, as shown in the red box in the figure below;

5.Enter the operation interface and click the "Change" button in the virtual memory, as shown in the red box in the figure below.

6.In the virtual memory box, uncheck "Automatically manage the paging file size of all drives", as shown in the red box in the figure below.

7.Continue to customize the size under the free space, as shown in the red box in the following figure;

8.To complete the customization, click the "OK" button below, as shown in the red box in the figure below.

In the computer,A cache is a type of temporary memory that is used to speed up access to data. Here are some common ways to set up and optimize your PC's cache:

Most computers' processor caches are managed automatically and don't need to be set up manually. But you can look for options related to processor cache by going into your computer's BIOS settings. It's not recommended to change processor cache settings at random unless you know exactly what you're doing.

Here is an example of a Windows operating system, you can set up the hard disk cache by following these steps:

Open"this PC"(or.)"My computer"window.

Right-click on the hard drive you want to set cache on and select"attributes"。

In"attributes"dialog box, switch to"Hardware"tab, and then select your hard drive.

Click"attributes"button to enter"Strategy"tab.

In"Write to the cache"section, select the option that suits your needs, for example"Quick delete"(provides higher performance) or"Rapid recovery"(Provides greater data security).

Click"OK"Save the settings.

Note:

If you don't know much about computers, you must be sure to modify it with the help of a professional, otherwise it will easily lead to computer problems. Thank you!

Taking win7 system as an example, the specific steps are as follows:

1.Turn on the computer, select "Computer" on the desktop with the mouse, click the right mouse button, and select "Properties";

2.At the top left of the window, select "Advanced System Settings";

3.Enter the "System Affiliation" window, select "Advanced", and select "Settings" in the performance settings.

4.Select the second option in the top bar, "Advanced", and click "Change";

5.Enter the "Virtual Memory" setting window, and you can choose to "Auto-allocate hosting mode" to let the system set it automatically;

6.It can also be set manually, and the indicator can be set manually by canceling the auto-assign option; Select""Custom" and then enter the size of the virtual space you need to set; You can also select System Management Size;

7.Once the setup is complete, click OK and restart your computer.

As shown in the figure, the write cache of the SSD is turned on by default, you can check it in the device manager, if you don't open it, you can put the previous tick on it, just restart the computer, pay attention to whether the achi mode and 4K are aligned, these have a great impact on the performance of the SSD!

If the disk is larger than 32, do not do cache, just install the system directly.

Caching is a no-brainer. For example, an 8G SSD can only be used for caching.

Don't trust the driver wizard, this thing is not reliable, you can download the program detection that comes with the micron solid state drive. SSD cache is definitely there, don't worry.

Generally, the hardware is too new, and the software is not updated to recognize**, resulting in no recognition.