What are the consequences of doing a closed water experiment when the waterproof layer has not yet d

In fact, when the waterproof layer has not dried, it is not possible to conduct waterproof experiments on him, generally if you want to carry out itClosed water testIn this case, it is necessary to conduct a closed water test within 24 hours after the completion of the waterproofing construction。So in the process of conducting a closed water test, we must ensure that the waterproof layer has been completely dried, so as to ensure that you are actually facing a relatively safe situation in the subsequent use process.

When conducting a closed water test on the bathroom, it is necessary to drain the floor first.

and the nozzle around the pipe to plug it, so that the results of the follow-up test can be seen very well. And you also need to build a 20 cm high retaining wall on the door, which is actually to ensure that the water in the bathroom does not spread to all parts of the room.

In fact, such a step is quite critical when doing closed water treatment, and many people may ignore a step that thinks that such a retaining wallRegardless of whether it will appear or not, in fact, there will not be many problems in the subsequent use process, because this retaining wall seems to have a very obvious effect.

But in reality, if you think so, it is wrong. Because this retaining wall actually plays a very key role, because when you test it, you actually need to pour about 20 centimeters of water into the bathroom. So such a moisture height can let you see what the results of the experiment are, so it is more important to prepare a retaining wall of the same height.

If the waterproof layer is not dry, the final result will be inaccurate.

If the waterproofing layer is not dry, it is likely to lead to waterproofing failure.

The waterproof layer has not been dried to do the closed water experiment, and it will not be able to achieve the purpose of the experiment itself.

This will affect the waterproof effect of the waterproof layer, and the decoration is still gradual, step by step.

I haven't tried this kind of consequence, so you can do a closed water test after the waterproofing layer has dried.

I think this will cause waterproof leakage, but it hasn't dried yet.

When the waterproofing layer is not dry, then there may be safety problems when the waterproof layer is closed.

Hello, my waterproofing did not do a closed water experiment.

Hello! Glad for your question. Hello, my waterproofing did not do a closed water experiment.

If you don't do a closed water test after you finish waterproofing, then you can do a closed water test after pasting tiles. However, it is necessary to wait until the tile grout is completely dry, and to extend the time of water closure appropriately. After the waterproof construction is completed, you can do the closed water test after the waterproof layer is completely dry; Temporarily plug the floor drain and the perimeter of the pipe mouth; Build a 20cm high retaining wall at the doorway; Start to store water, at a depth of 5-20 cm, and do a good job of marking the water level; The water storage time is 72-144 hours;

Generally, not. Two days of closed water test is enough, of course, the effect of closed water for a week is better, and since it is a waterproof layer, natural water will not damage it, but based on the actual situation, the general bathroom will not accumulate water for a long time, so two days is enough.

Before laying tiles, be sure to make a protective layer of the waterproof layer, and then carry out the follow-up process after drying.

The closed water test, also known as the water storage test, should be filled with water, and the water should have a sufficient volume. The water storage depth of the water storage test should not be less than 20 mm, the water storage height is generally 30 40 mm, and the water storage time shall not be less than 24 hours.

This test is generally done on the roof, bathroom or room with waterproof requirements. In the early stage of the water storage test, it should be inspected downstairs every 1 hour, and in the later stage, it should be inspected downstairs every 2 3 hours. If water leakage is found, the water storage test should be stopped immediately, the waterproof layer should be re-improved, and the water storage test should be carried out after the treatment is qualified.

Summary. Hello dear,According to your question,Xiaodu inquired for you:In fact, when the waterproof layer has not dried,It is not possible to carry out a waterproof test on him,Generally, if you want to carry out a closed water test,Then you need to carry out a closed water test within 24 hours after the completion of waterproof construction。

So. What are the consequences of doing a closed water experiment when the waterproof layer has not yet dried?

Hello dear,According to your question,Xiaodu inquired for you:In fact, when the water layer of the anti-front pants is not stuffy and the socks are dry,It is not possible to carry out a waterproof test on him,Generally if you want to carry out a closed water test,Then the silver cover Jane needs to be closed water test within 24 hours after the completion of waterproof construction。 So.

So in the process of conducting a closed water test, we must ensure that the waterproof layer has been completely dried, so as to ensure that you are in the process of subsequent use, in fact, you are facing a relatively safe situation.

Do you have any questions, Xiaodu will answer them for you. <>

Closed Water Test Specification:First of all, it is necessary to block the floor drain in the waterproof layer area, and then stir the door with yellow clay and cement trembling mortar to make a water retaining strip about 25cm high.

Start to release water on the ground, and the depth of the water can reach 5-20cm; After 24 hours of water storage, go to the corresponding bathroom location of the downstairs neighbor's house to check whether there is leakage on the floor slab, and re-do the waterproof layer if there is no leakage until there is no leakage at all; After the surface bricks are laid, the closed water test can be redone according to this method.

Precautions for closed water test.

1. The closed water test must be started only after the waterproof is completely dry.

2. When doing the closed water test, the owner himself had better check with the property department and the downstairs neighbors to check whether there is any water leakage.

3. The closed water area and floor drain should be blocked and kept in a state of no water leakage, otherwise it will affect the experimental effect.

4. When doing the closed water test, the position of the door needs to make a stall, otherwise when the water surface height reaches a certain height, the water will run from the door.

5. Put a cover or basin under the faucet or water pipe to alleviate the impact of small water flow on the waterproof layer and reduce the damage of the waterproof layer.

6. When painting waterproof materials, do not discard the bags and waterproof barrels of waterproof coatings, which can be used in closed water tests, among which the packaging bags are suitable for blocking the sewer pipes, and the buckets can be used to reduce the impact of the waterproof layer on the waterproof layer.

Does forgetting to do a closed water experiment when doing waterproofing have an impact on the quality of waterproofing: Forgetting to do a closed water experiment when doing waterproofing has an impact on the quality of waterproofing The answer is that it will affect the next process and affect the construction progress. Therefore, within 24 hours after the construction of the waterproof coating, the waterproof coating is completely solidified, and the experiment of closed water for 72 hours can be done.

If there is a water leakage, it can be repaired in time to achieve the principle of no water leakage. If the waterproof construction of the fruit is returned to the mu, the waterproof coating is dry, and the water test is not carried out for a long time, and the next process, if you are in a hurry, and the construction is not carried out on the closed water test, and the water leakage phenomenon is produced later, which is a disaster for waterproofing.

1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records.

2. Check the quality certification documents of the materials and include them in the engineering and technical files.

3. After the material enters the site, the material inspection report shall be issued according to the specification.

4. When all the indicators of the physical properties of the material meet the standards, it is qualified; If an index does not meet the requirements of the standard, the index should be re-sampled in the tested product for re-inspection, and the re-test result meets the requirements of the standard, and the batch of materials will be judged to be qualified.

5. Waterproof material. There are three main categories: waterproofing membranes; 911 polyurethane waterproofing material; New polymer cementitious waterproofing material.

The last category is divided into general-purpose GS waterproof materials and flexible JS waterproof materials. Among them, the universal waterproof material is suitable for the waterproofing of the indoor floor and wall of the family.

The closed water test is done to check whether the waterproof function of the waterproof layer is normal. After the end of the test, the stagnant water should be removed in time.

Detect whether the waterproofing is done well, and judge from the following aspects.

In terms of material selection (beforehand): you should choose environmentally friendly, non-toxic and harmless waterproof materials that are suitable for toilet waterproofing.

Construction process (in the matter): the construction process must be carried out in strict accordance with the requirements of the process, and it is recommended to ask a qualified waterproof engineering company for construction.

After the construction is completed (afterwards): the water is closed for 24 hours for inspection, and the coating shall not have bulging, powder or sand holes, etc., and the coating must reach the basic thickness, which is generally required to be above.

The main function of the closed water test is to check whether there is any leakage in the waterproof construction, whether the waterproof function is normal, although the closed water test can not guarantee that the waterproof will never leak, but at least it can be tested whether the waterproof is qualified, so as to reduce the risk of water leakage in the future.

How to judge whether the waterproof is done well, that is, to do a closed water test!

Closed water test steps:

1. After the waterproof construction is completed, the closed water test can be done after 24 hours;

2. Temporarily block the floor drain and the perimeter of the pipeline mouth;

3. Build a 20cm high retaining wall at the door;

4. Start to store water, with a depth of 5-20 cm, and mark the water level;

5. Water storage time 48 72 hours;

6. After the water is closed on the first day, see if the water level has dropped significantly, if so, please check whether there is leakage around the roof and pipes downstairs in time, if not, continue to close the water;

7. On the third day, the water is closed, and the downstairs ceiling and roof pipes are fully inspected.

8. Carry out the next process after being fully qualified.

The water test is to fully waterproof the water during the inspection.

The closed water test verifies that the waterproof function of the anti-layer is normal. Do a closed water test to seal the door and sewer, the depth of the aquifer at the highest point is not less than 20 mm, the water storage time is not less than 24 hours, and check whether there is a leakage point.

In addition, the use of some big brands of waterproof coatings, the effect is more guaranteed, such as Master Luban waterproof coatings. Because some small brands of waterproof coatings may be able to achieve waterproof effect in a short time, but after a long time, it is easy to appear hollowing into powder, and the closed water test can not completely test the effect. Therefore, it is more reassuring to choose a big brand.

The closed water test is used to verify whether the waterproof function of the waterproof layer is normal. After the end of the test, the stagnant water should be removed in time.

Check whether the waterproofing is done well is mainly verified by doing a closed water test.

Visual inspection method: open the downstairs toilet and bathroom to observe whether there are traces of water seepage or water droplets.

Contact inspection method: Touch the suspected water seepage with your hand to confirm whether there is any water leakage.

The closed water test is part of it, and it is also important to choose quality assurance products such as Oriental Yuhong, Longkeqi waterproof coatings, and Degao famous brands.

Summary. Heavy weights will not affect the waterproof effect. After the waterproof material is paved, as long as the treatment is perfect, the waterproof material will play a great role in blocking, even if there is a heavy thing on it, it will not affect the waterproof effect.

The waterproof material is a solvent-based and water-emulsion coating made of synthetic polymer, polymer and cement as the main film-forming substance, and is processed by adding various materials, which is painted on the surface of the base layer that needs to be waterproofed such as the roof, basement and toilet of the building, and forms a continuous, overall coating waterproof layer with a certain thickness at room temperature.

Do waterproofing. When doing the closed water experiment, the master laminated something heavy in the waterproof. Does it matter.

Hello dear, no impact.

Heavy weights will not affect the waterproof effect. After the waterproof material is paved, as long as the treatment is perfect, the waterproof material will play a great role in blocking, even if there is a heavy thing on it, it will not affect the waterproof effect. The waterproof material is a solvent-based and water-emulsion coating made of synthetic polymer, polymer and cement as the main film-forming substance, and is processed by adding various materials, which is painted on the surface of the base layer that needs to be waterproofed such as the roof, basement and toilet of the building, and forms a continuous, overall coating waterproof layer with a certain thickness at room temperature.

Won't it destroy the waterproofing layer? The tile master put more than 40 bricks at the door of the bathroom and stacked them. I'm afraid it will have an impact.

Dear, it's okay! It will not affect the waterproof effect. Don't worry<>