The benefits of foamed ceramic insulation board to society

Closed-cell foamed ceramic insulation board is a new type of inorganic ceramic insulation material. Fly ash, coal gangue, gravel and other industrial wastes as the main raw materials, using advanced production technology and foaming technology, after high temperature roasting into high porosity closed-cell ceramic materials. It is suitable for external insulation of building exterior walls, fireproof isolation belts, building self-insulation cold and hot bridge treatment, etc.

The product has fire retardant, small deformation coefficient, anti-aging, stable performance, good ecological and environmental protection, good compatibility with wall base and plastering layer, good safety and stability, and can have the same life as the building. More importantly, the fire rating of the material is Class A, which overcomes the Achilles' heel of organic insulation materials that are afraid of open flames and easy aging, and fills the domestic gap of building inorganic insulation materials. All performance and technical indicators have reached the domestic leading level, far exceeding similar products.

Low thermal conductivity.

The thermal conductivity is comparable to that of the insulation mortar;It has good thermal insulation performance and can be used as a thermal insulation material for external wall insulation system.

Non-flammable and fireproof.

It is made of high temperature roasting of more than 1100 meters, with a1 combustion performance, and has the fire resistance of power plant refractory bricks, which is an ideal material for external thermal insulation system and fire isolation belt with fire protection requirements.

Resistant to aging. Ceramic inorganic insulation materials, good durability, no aging, completely with the same life of the building, is incomparable to conventional organic insulation materials.

Good compatibility. It has good compatibility with cement mortar, concrete, reliable bonding, similar linear expansion coefficient, and the traditional ceramic building materials fired at high temperature, no cracking, no deformation, no shrinkage under thermal expansion and cold contraction, and the tensile bond strength of cement mortar can be reached after double-sided stucco inorganic interface agent.

Low water absorption. The water absorption rate is very low by 2%, and it can be well bonded with cement mortar, facing bricks, etc., and the external adhesive facing bricks are safe and reliable, and are not limited by the height of the building.

Weather-resistant. It is not deformed, aged or cracked under harsh climatic conditions such as sun exposure, cold and heat drastic changes, wind and rain, etc., and its performance is stable.

The key lies in its durability, non-aging, non-toxic and harmless, environmentally friendly and green.

Unlike foamed cement and extruded plastic boards, these are all fooling the public.

Welcome to our Yixing factory for inspection, there is a contact method in my information.

1. Low thermal conductivity and thermal conductivity are equivalent to thermal insulation mortarIt has good thermal insulation performance and can be used as a thermal insulation material for external wall insulation system.

2. Non-combustible, fireproof calcined by high temperature of more than 1200, the combustion performance is A1 grade, with the fire resistance of refractory bricks of power plants, and it is an ideal material for external thermal insulation systems and fireproof isolation belts with fire protection requirements.

3. Aging resistance Ceramic inorganic insulation materials have good durability, no aging, and are completely the same life as buildings, which is incomparable to conventional organic insulation materials.

4. Good compatibility with cement mortar, concrete, etc., good compatibility, reliable bonding, similar expansion coefficient, and the same as the traditional ceramic building materials fired at high temperature, no cracking, no deformation, no shrinkage under thermal expansion and cold contraction, and the tensile bonding strength of cement mortar can be achieved after double-sided stucco inorganic interface agent.

5. Low water absorption The water absorption rate is very low, and it can be well bonded with cement mortar and facing bricks, and the external facing bricks are safe and reliable, and are not limited by the height of the building.

6. Weather resistance: no deformation, no aging, no cracking under harsh climatic conditions such as sun exposure, cold and heat upheaval, wind and rain, etc., and the performance is stable.

1. The main technical indicators of lightweight foamed ceramic insulation board are shown in the following table

I have heard of this new type of material, and it may be more expensive to make it, and the market may not necessarily recognize it.

Energy saving, in addition to the product itself and the same life of the building is also a big advantage.

Foamed ceramics are made by calcining raw materials to a molten state at a high temperature of 1200 degrees and then foaming, which is fireproof and flame retardant, and belongs to Class A non-combustible materials. Because the product is an independent closed-cell structure with high porosity, and the thermal conductivity is only, its thermal insulation performance is very good. When using foamed ceramic insulation board, it can not only ensure the thermal insulation effect, but also the fire performance has reached a high fireproof spike Wang standard.

There are three points to be paid attention to in the insulation and fire prevention of external walls: first, strictly implement various fire regulations; Second, select thermal insulation materials with good performance, and take fire prevention measures in the construction stage of thermal insulation materials to prevent the possibility of various fires; Thirdly, install the insulation board correctly and use it correctly after installation.

Foamed ceramic insulation board in compressive strength, water absorption and durability of these three aspects are no problem, foamed ceramic insulation board, compressive strength of more than 5MPa, product single-point hanging force of more than 100 kg, can fully meet the hanging requirements of water heaters, TV, air conditioning and other household appliances. The foamed ceramic insulation board has good waterproof and moisture-proof performance, which has a lot to do with its product structure, because each pore is an independent closed-cell form, so it can effectively prevent the conduction and penetration of water and moisture.

As a new type of green building materials, the main raw material of foamed ceramics is granite tailings, which truly achieves the development concept of green development, circular economy and comprehensive utilization of resources, and has no harm to human health.

The foamed ceramic insulation board is a closed-cell ceramic material with high porosity made of clay tailings, ceramic fragments, river silt, and early adulteration materials as the main raw materials, and the production technology and foaming technology of advanced wax brigade are roasted at high temperature.

Foamed ceramics have always been known as "solid waste" in the industry, and the products have the advantages of light weight, high strength, fire resistance, waterproof and moisture-proof, thermal insulation, sound insulation and noise reduction, green environmental protection, stable performance, and good weather resistance.

Production principle: in the material components, an appropriate amount of high-temperature foaming agent is introduced, and fired within the range of the softening and melting temperature of the material, and the main raw material reacts with the foaming agent at high temperature to generate a large number of volatile gases. Due to the high viscosity of the melt, the volatilization of the gas causes the overall expansion of the material, and with the decrease of the sintering temperature, the pores after the volatilization of the gas in the melt are preserved, and the material presents dense closed pores, and finally the porous and lightweight material structure is obtained.

Lightweight: The bulk density of foamed ceramics is 380 430kgm, which is only half of the weight of traditional aerated bricks, which can greatly reduce the load of the building structure.

High strength: The compressive strength is more than 5MPa, and the single-point hanging force of the product is more than 100 kg, which can fully meet the hanging requirements of water heaters, TVs, air conditioners and other household appliances.

Fireproof and flame retardant: Foamed ceramics are made by calcining raw materials to a molten state at a high temperature of 1200 and then foaming, which is good fireproof and flame retardant, and belongs to Class A non-combustible materials.

Waterproof and moisture-proof: the performance of foamed ceramics does not absorb water at all, and its product structure has a great relationship with its product structure, because each pore is an independent closed-cell form, so it can effectively prevent the conduction and penetration of water and moisture.

Thermal insulation: Because the product is an independent closed-cell structure with high porosity, its thermal insulation performance is very good, and the thermal conductivity is only.

Sound insulation and noise reduction: This is also directly related to the product structure. The 10cm thick foamed ceramic air has a sound insulation volume of 43db, which has met the requirements of daily use as an indoor partition wall.

Green environmental protection: As a new type of green building materials, foamed ceramics are mainly raw materials for granite tailings, which truly achieve the development concept of green development, circular economy and comprehensive utilization of resources.

Easy installation: the installation of foamed ceramic partition board is very simple, the two sides of the wall board are tenon and groove structure, the joints are bonded with tile adhesive, and the beams, plates and columns of the wall board and the main structure are connected by galvanized L-shaped corner code. The whole process is dry construction, which has a positive role in promoting the safe and civilized construction of the construction site and can reduce the generation of a large amount of construction waste.

Advantages of ceramic sheet insulation integrated board:

Factory-based fully automated production, product quality is stable, performance is stable, and efficiency is high.

The double fastening structure design of national patent + word anchorage is adopted to improve the safety factor of the insulation system.

It has good corrosion resistance, impact resistance and high safety;

The panel is made of cement fiber pressure plate, which has low water absorption, high strength and good dimensional stability.

Insulation materials can be selected in a variety of ways according to customer needs.

The surface is specially glazed treatment, which is not easy to adhere to attachments and dust, easy to clean, energy-saving and environmentally friendly, no radiation and no pollution.

Sound and heat insulation: high density, good sound insulation; Low thermal conductivity and good thermal insulation.

It can overcome the problems of cracking, water seepage, and poor durability of the insulation efficiency of the traditional wet operation external wall insulation system.

Before this problem, it should be explained that foamed ceramic thermal insulation decorative integrated board and ceramic thin plate thermal insulation decorative integrated board are completely different exterior wall insulation materials.

The foamed ceramic insulation and decorative integrated board insulation layer is made of foamed ceramics, which is a lightweight plate product with honeycomb bubble holes made of industrial solid wastes such as clay, quartz, ceramic waste residue, perlite tailings, iron ore tailings, red mud, fly ash and other raw materials, supplemented by foaming agent and other materials after grinding. This is shown in the figure below.

Foamed ceramic insulation board.

The finishing layer generally has calcium silicate board or direct spray coating. Since the finishing layer is not the same, ** is also different. Advantages of foamed ceramic insulation decorative integrated board:

1: Wide range of application, preventing hot and cold bridge production.

2: High strength.

3.Good thermal performance.

4.Good fire retardant and safety.

5.Temperature stability and chemical stability.

6.Green environmental protection and pollution-free.

The ceramic sheet exterior wall insulation and decoration board is referred to as the ceramic insulation and decoration board, the insulation layer generally has rock wool, rigid foam polyurethane, etc., the finishing layer is made of 1200 degrees of high temperature pressed ceramic sheet, yapu ceramic insulation decorative board is a chemical synthesis of the finishing layer, can be permanently not shed, do not fade. This is the most essential difference from the foamed ceramic insulation decorative integrated board.

Ceramic sheet and polyurethane insulation board are made of thermal insulation integration, which is the latest curtain wall material in today's construction industry, with the advantages of environmental protection, energy saving, moisture-proof, sound insulation, breathability, rich color, lasting as new, and a wide range of applications.

The ceramic sheet is fired at 1200 high temperature, with excellent properties such as no deformation, no decolorization, durability, class A fire performance, bending strength of 50MPa, destruction strength of 800N, water absorption, Mohs hardness grade 7, and the performance of various materials far exceeds that of traditional ceramics, stone, aluminum-plastic panels and other materials;

Light weight, high strength, high flatness, good sound and heat insulation, strong seismic resistance, fire resistance, chemical corrosion resistance, weathering resistance, weather resistance, anti-fouling and easy washing;

Advantages of thin ceramic insulation integrated board:

1.Thermal insulation, reduce consumption and save energy

Compared with the traditional exterior wall insulation and decoration building materials, the thin ceramic exterior wall insulation and decoration integrated board has excellent cold resistance and heat insulation performance, saves energy expenditure, and the product is cost-effective, which greatly reduces the heating and cooling energy consumption, and can save more than 75%.

2.Good value for money

The overall cost of thin ceramic insulation integrated board is about 1 3 to 1 4 of aluminum plate and aluminum-plastic panel, and 1 2 to 1 3 of the cost of marble insulation and decoration.

3.Waterproof and moisture-proof

Traditional exterior wall decoration materials generally have the degradation of the substrate caused by water permeability and cold penetration, which can easily lead to problems such as water seepage on the indoor wall. The excellent self-structure of the new plate and the compact installation mode between the plates avoids the structural damage caused by rain, snow, freezing, thawing, dry and wet cycles, eliminates the worry of water seepage on the wall after installation, effectively avoids the phenomenon of mold on the indoor wall, and also prolongs the life of the building.

4.Lightweight, high-strength, shock-resistant and crack-resistant

Thin ceramic insulation integrated board is light in weight, high in strength and good in impact resistance. It has the advantage of light weight, which not only reduces the bearing load of the building itself, but also greatly reduces the impact on the building. The board is fixed inside the wall by using the combination of adhesive anchors, which is strong in integrity, shock-resistant and crack-proof, strong and safe.

5.Wide range of applications

Thin ceramic insulation integrated board can be widely used in apartment houses, office halls, villas, garden attractions, old building renovation, municipal construction and other engineering fields, suitable for various structural types of buildings, can be used for outdoor decoration, as well as the decoration of existing buildings energy-saving transformation, thin ceramic insulation board is also very popular.

6.Easy to install and cost-saving

The thin ceramic insulation integrated board is light in weight, high in strength, time-saving and labor-saving in handling and installation, and the installation method combined with adhesive anchors can speed up the progress of the project, save construction costs, and reduce comprehensive costs.

7.Green and durable

Thin ceramic insulation integrated board has a stable chemical and physical structure, the board can also be flexibly disassembled, reused and installed on other buildings, the remaining scraps of construction can also be reused, in the construction process to a large extent to reduce construction waste, is a high-quality, high-performance environmental protection products.

The thermal insulation and decoration integrated board is a new type of thermal insulation and decoration energy-saving system integrating thermal insulation and decoration by prefabricating the exterior finishing layer of various colors or shapes with various functional thermal insulation materials; It is fixed on the wall of the building by sticking anchor or dry hanging.

At present, there is a large demand for integrated boards in Jiangsu, Zhejiang and Shanghai, and the decorative effect and texture of thermal insulation and decorative integrated boards in Suzhou are good; Good fire performance, impact crack resistance, good durability, good thermal insulation effect, more energy saving, high safety factor.

A wide range of exterior finishes and insulation materials are available and can be customized according to customer needs.

Sub-zero temperatures, strong winds, heavy rain weather is not suitable for construction, other conditions can be constructed.

I like the insulation and decoration of the integrated board,.