Is it better to use glazed bricks or microcrystalline stone for floor tiles

The maintenance method of microcrystalline stone is also very important, and the daily cleaning and cleaning are very particular. 1. Daily cleaning: It is best to clean the sand under your feet in time, it is easy to scratch the microcrystalline stone.

Therefore, in daily cleaning, the dust control system is mainly used: dry dust pushing dust removal + fair carpet system to clean. At the entrance and exit of the place of use, carpets or dust mats should be laid to avoid hard debris such as sand and gravel from abrasion and scratching the surface of the stone.

2. Cleaning: Quartz sand SiO2, the main component of microcrystalline stone, is a substance with very good chemical properties, and will not react with acid and alkali at room temperature; Coupled with the compactness of microcrystalline, water will not penetrate into it under normal circumstances. Therefore, a normal neutral detergent will be effective, but do not use a detergent that contains friction agents such as detergents.

3. Be sure to use a special and accurate maintenance agent for maintenance.

The surface of microcrystalline stone is a layer of glass and is not wear-resistant. The surface of the glazed brick is a layer of glaze, which is easy to grind off. So it's better to also buy a polishing scratch.

From the aesthetic point of view of decoration, microcrystalline stone is better, from the economic aspect than the glazed brick is cheaper, from the wear-resistant and practical point of view, it is better to paste polished tiles.

Microcrystalline stone has gradually become mainstream! **It's almost the same as the full glaze!

High-grade microcrystalline stone and full-polishing glaze now basically use 3D inkjet technology, such as the new Zhongyuan brand. After revolutionary innovation, the full glaze has now been upgraded to high crystal, which is close to the full glaze in price and microcrystalline in grade, and is the latest choice for floor tiles. Microcrystalline stone is still a high-end choice for decorative flooring, and high-crystal stone will popularize high-end products.

Regarding the problem of wear resistance, as long as the surface protection of microcrystalline stone and high-crystal stone is done during the construction process, it is still very wear-resistant in the later use process, especially for home use, it is difficult to have high-frequency and high-strength friction, even if it is used for a long time. If you do have a slight scratch, you can use toothpaste and toothbrush to gently wipe it off.

Summary. Hello dear, I am happy to answer for you, the answer is: regret using microcrystalline stone floor tiles reason 1

The hardness of microcrystalline stone floor tiles is not high, and compared with traditional ceramic tile decoration materials, it causes certain troubles to daily home use. At the same time, in the process of taking care of the floor tiles, after cleaning, the surface moisture is relatively difficult to dry, due to the smooth surface, it is easy to slip and fall, which is not very safe, especially for home decoration groups with elderly and children. Reason 2

Microcrystalline stone has the characteristics of material, the appearance is very shiny, and the strength is low, resulting in daily use, if you do not pay attention, it is easy to scratch the porcelain surface, the scratches are easy to see, and the floor tiles are not resistant to wear, and the appearance is like glass texture, which is not suitable for large-scale paving, resulting in different degrees of scratches, thereby affecting the experience of decorative effect and reducing the decoration grade.

Hello dear, I am happy to answer for you, the answer is: regret using microcrystalline stone floor tiles reason 1The hardness of microcrystalline stone floor tiles is not high, and compared with traditional ceramic tile decoration materials, it causes certain troubles to daily home use.

At the same time, in the process of taking care of the floor tiles, after cleaning, the surface moisture is relatively difficult to dry, due to the smooth surface, it is easy to slip and fall, which is not very safe, especially for home decoration groups with elderly and children. Reason 2Microcrystalline stone has the characteristics of material, the appearance is very shiny, and the strength is low, resulting in daily use, if you do not pay attention, it is easy to scratch the porcelain surface, the scratches are easy to see, and the floor tiles are not resistant to wear, and the appearance is like glass texture, which is not suitable for large-scale paving, resulting in different degrees of scratches, thereby affecting the experience of decorative effect and reducing the decoration grade.

Kiss Hello Reason 3Microcrystalline stone paving, the whole is very regular, can not show the natural color of natural stone, high-end decorative sense. At the same time, it can't be close to nature, so that the home decoration effect can not show a unique charm, and compared with other advantages, it lacks texture.

Reason 4Microcrystalline stone has a good aesthetics, but the surface structure of the tile is composed of small crevices and holes, if there are stains on the ground, it is easy to be sucked into the tile, so that the ground is not good to use. Moreover, it is also very inconvenient and troublesome to clean.

Does microcrystalline stone have many small holes on it, and the radiation is large? Can it be carcinogenic?

Hello, Tested microcrystalline stone tiles have no radiation and will not cause cancer.

Do you need to have many small holes on the vitrified brick?

Do all-ceramic vitrified tiles have many small holes on them? Is it carcinogenic?

Kissing is not big and does not cause cancer.

Microcrystalline stone floor is now more popular ground decoration materials, microcrystalline stone floor tiles have many advantages, microcrystalline stone floor tiles decoration effect is very good, the surface pattern is relatively unique, the advantages of microcrystalline stone and glass, the decoration effect is very high-end fashion infiltration. Moreover, the wear resistance of microcrystalline stone flooring is very good, unlike ordinary stone, which is easy to crack, and can be used for a long time without wearing. Microcrystalline stone has a lot of colors, which is suitable for many places and has a good decorative effect.

Advantages of Microcrystalline:

Delicate texture. The gloss of the plate surface is crystal clear and soft: the microcrystalline stone has both a special microcrystalline structure and a special glass matrix structure, with a delicate texture and a crystal bright plate surface, which can produce a diffuse reflection effect for the incoming light, making people feel soft and harmonious.

Excellent performance. More physical and chemical advantages than natural stone: microcrystalline stone is sintered through a special process under a high temperature state similar to the formation conditions of granite, with uniform texture, high density, high hardness, compression, bending resistance, impact resistance and other properties better than natural stone, wear-resistant, not easy to damage, and there are no fine cracks common to natural stone.

Rich colors and a wide range of applications.

The production process of microcrystalline stone can produce a series of colorful hues according to the needs of use (especially the crystal white, beige, light gray and white linen four colors are the most fashionable and popular), and at the same time, it can make up for the defects of natural stone color difference and shouting socks, and the products are widely used in hotels, office buildings, stations and airports and other interior and exterior decoration, and are more suitable for advanced decoration of families, such as walls, floors, decorative panels, furniture, basin panels, etc.

Good pH resistance and excellent weather resistance.

As an inorganic crystallized material with stable chemical properties, microcrystalline stone also contains a glass matrix structure, and its pH resistance and corrosion resistance are more than that of natural stone, especially the weather resistance is more prominent, and it will not fade when exposed to long-term wind and sun, and will not reduce its strength.

Disadvantages of microcrystalline

Low intensity. The Mohs hardness of the jade layer on the surface of microcrystalline stone is 5-6, and the strength is lower than that of polished bricks by 6-7 on the Mohs scale.

The scratches are noticeable. The surface gloss of microcrystalline stone is high, which can reach 90%, and it will be easily visible if it encounters scratches.

Easy to get dirty. There are a certain number of pinholes on the surface of microcrystalline stone, which can easily be seen when encountering dirt.

The performance of microcrystalline stone flooring is very good, but the current ** is also higher than other floor tiles, and some families will not choose microcrystalline stone floor tiles if the budget for decoration is limited. The use of microcrystalline stone floor tiles must pay attention to care and maintenance, because although it has many advantages, but there are also places that need to be excited, the strength of microcrystalline stone is relatively low, so it is best not to hit hard objects to avoid chipping. Moreover, the scratches of microcrystalline stone are not easy to repair, and they are more obvious, so it is necessary to pay attention to maintenance and cleaning in daily life.

You can get it for free

Not good, the most obvious disadvantage of microcrystalline stone tiles is poor wear resistance, the surface of microcrystalline stone jade layer Mohs hardness is 5-6 grades, the strength is lower than the Mohs hardness of polished tiles 6-7 grades, the surface gloss is high, can reach 90%, if scratches will be easy to show. Another obvious disadvantage of microcrystalline stone tiles is that they are not resistant to dirt, because there are a certain number of pinholes on their surface, which can easily be seen when encountering dirt.

Common types of living room floor tiles are full-body bricks:

1. Full-body brick is a kind of wear-resistant brick, although there are varieties such as seepage bricks, but relatively speaking, its color is not as good as glazed bricks. As the current interior design is more and more inclined to plain design, so the all-body brick has become more and more fashionable, and is widely used in the floor of decoration projects such as halls, aisles and outdoor walkways, and is generally less used for walls, and most of the non-slip bricks belong to the all-body bricks.

2. Vitrified bricks of living room floor tiles.

In order to solve the problem of easy dirtiness of polished tiles, there is a variety called vitrified tiles on the market. Vitrified tiles are actually full tiles. Its surface is smooth but does not need to be polished, so there is no problem of polishing porosity.

Vitrified tile is a type of strengthened polished brick, which is fired at high temperatures. The texture is harder and more wear-resistant than polished tiles. Undoubtedly, it's just as high.

3. Mosaic of living room floor tiles.

Mosaic is a kind of brick with a special way of being, which is generally composed of dozens of small bricks to form a relatively large brick. It is widely used for small indoor walls and outdoor large and small walls and floors with its small size and color.

Advantages of microcrystalline stone tiles: 1. Excellent performance: microcrystalline stone is sintered through a special process under high temperature conditions similar to granite, with uniform texture, high density, high hardness, compression, bending resistance, impact resistance and other properties better than natural stone, wear-resistant, not easy to damage, and no fine cracks common to natural stone.

2. Delicate texture: the plate surface is crystal clear and soft: the microcrystalline stone has both a special microcrystalline structure and a special glass matrix structure, with a delicate texture and a crystal bright plate surface, which can produce a diffuse reflection effect for the incoming light, making people feel soft and harmonious.

Classification of microcrystalline stone tiles: According to the raw materials and production process of microcrystalline stone, microcrystalline stone can be divided into three categories: non-porous microcrystalline stone, full-body microcrystalline stone, and composite microcrystalline stone.

1. Non-porous microcrystalline stone Non-porous microcrystalline stone, also known as artificial white marble, is a new type of high-grade environmental protection stone with a number of physical and chemical indicators that are better than ordinary microcrystalline stone and natural stone, with pure color, no discoloration, no radiation, no pollution absorption, high hardness, acid and alkali resistance, wear resistance and other characteristics. Its biggest features are: no pores, no spots, high gloss, zero water absorption, and can be polished and refurbished.

2. Whole-body microcrystalline Whole-body microcrystalline stone, also known as glass-ceramic, is a new type of high-grade decorative material. It is made of natural inorganic materials, using a specific process, and sintered at high temperatures. It is non-radioactive and non-absorbent.

Does not corrode. Non-oxidizing. Does not fade.

No color difference. Excellent characteristics such as no deformation, high strength and high gloss. 3. Composite microcrystalline stone Composite microcrystalline stone is also known as glass-ceramic composite board, composite microcrystalline stone is a new type of composite plate that composes glass-ceramic on the surface of ceramic vitrified bricks on a layer of 3 5mm, and is a high-tech new product formed by secondary sintering, the thickness of glass-ceramic composite board is 13 18mm, and the gloss is 95.

Microcrystalline stone floor tiles are actually a kind of ceramic tiles or floor tiles, which belong to relatively high-grade floor tiles.

Before explaining the advantages and disadvantages of microcrystalline stone floor tiles, we will first bring you a black technology, Nalut gold diamond grinding stone. Now the decoration can be done without ceramic tiles, and it is completely possible to replace ceramic tiles with Nalute cement gold diamond grinding stone and silicon grinding stone, cement gold diamond grinding stone and silicon grinding stone as a whole seamless, poured on site, seamless that is, no bacterial breeding. Seamless cement gold diamond grinding stone and silica grinding stone are composed of three materials:

Nalute special cement mortar, Nalute Hanjia concrete sealing curing agent and Nalute Hansi concrete sealing curing agent.

Let's start with a detailed introduction to what are the advantages of microcrystalline stone floor tiles? What are the drawbacks?

The advantages of microcrystalline stone floor tiles are: the gloss of microcrystalline stone floor tiles is relatively high, and its gloss can reach more than 100, which can appear high-end and atmospheric. This stems from the fact that Chinese people like this kind of thing, and foreigners don't like this kind of high-gloss gloss, such as Apple experience stores and Starbucks floors are not allowed to have reflections after decoration.

The disadvantages of microcrystalline stone floor tiles are: they are not wear-resistant, easy to scratch, easy to stolen, and more troublesome to take care of.

Microcrystalline stone is actually a type of ceramic tile. At present, it is the most high-end category of ceramic tiles! Its core benefits are:

Bright (can reach 100 degrees of gloss, the same as the mirror), so use it as a decoration, high grade, can pretend to be luxurious! Of course, the more obvious the advantages, the more obvious the disadvantages, the biggest disadvantage is: the processing technology is very demanding.

Generally, ceramic tiles can be processed with ordinary blades, but if microcrystalline stone is to be processed, it needs to be processed by waterjet to achieve the best effect, and the processing cost is very high! During construction, the blade of ordinary masons cannot be cut (if it is barely cut, it will not be able to cut well, resulting in unnecessary loss); In addition, because it is too bright, it is easy to see a little scratch on the surface, that is to say, it is "not wear-resistant", so many people recommend microcrystalline stone on the wall as a background brick, but the ground is not recommended. Actually, this is misleading!

The appearance of microcrystalline stone is mainly caused by the construction process! If the construction process is well protected, in the future family life, there will generally not be much problem, most people are basically very clean in the home, there will be no sand and gravel large particles, mainly dust! The friction of the slippers will leave small scratches on the hair strands, but this scratch will not affect the overall effect because it is inherently brighter than other tiles, so even if there are small scratches, it will be brighter than glazed bricks!

So there is no problem with microcrystalline stone paving! But we must do a good job of protection during paving construction!