The use technology of the fog machine and the measures to control the fire of the fog machine?

It is completely okay to spray with a fog machine, and it is often seen in the cotton area that the people use this gasoline engine to spray cotton, and there are several aspects that please pay attention to:

1. Strictly follow the concentration ratio.

2. Cotton branches are easy to break, so you should pay attention to spraying and walking.

3. Don't turn on the potion switch completely, because you can't move around too fast in the cotton field during this period, and save medicine.

4. The throttle of the fog machine is opened to a maximum of 2 3 to avoid strong turbine wind blowing and breaking flower branches or cotton leaves.

Let's find the Super Mist :

The Super Mist is a unique feature for tree pesticide.

The CZ-750 can spray 22m3 of dense fine fog into space every second, with a vertical height of about 35m, which exceeds the height of a 100-year-old tree. CZ-540 can spray m3 dense fine mist into space every second, with a vertical height of about 25m, more than the height of the average tree age of 30 years. The fog machine has the unique advantages of large fog volume, fine fog quality, high density, and long spray distance, generally when the road protection forest is operated, the axial direction of the fog head is aimed at the middle and upper part of the tree on the right side in the left side of the road, such as the road width is 20m, the tree height is also 20m, and the expansion range of the fog just covers the whole area of the tree.

For fruit groves, nurseries of timber forests, tea groves and landscape trees with a height of less than 10m, etc., the natural wind can be used to help implement long-distance covering operations, only the ratio of high concentration of liquid medicine is appropriate, and the insecticide rate can reach more than 95%. In particular, when pests with flying ability escape for their lives, they collide in the mist of medicine in the sky and are most affected, so they have a 100% mortality rate. Compared with conventional mechanical equipment of the same power, the drug consumption is below 50%, and the water consumption is about 1 36.

Summary. 1.Place the machine in a flat and dry place, and there shall be no flammable or explosive materials within two meters from the spout.

2.Pump with a pump or pump to fill the inlet line with gasoline.

3.Pump the oil first, press the power switch with one hand, turn on the circuit, operate the pump with one hand, until the engine emits a continuous sound, hear the sound of uniform and stable frequency, you can let go of the power switch, and stop pumping, and then fine-tune the oil needle hand wheel to the engine to send out crisp, you can start the smoke spraying operation.

4.If the first start fails, first check whether the gasoline is in the oil pipe at the inlet of the oil nozzle, too much fuel into the carburetor, it is not easy to start. At this time, you need to close the throttle and blow the oil dry with a pump until you hear a ** sound.

Repeat the above starting procedure, pay attention not to use too much force when closing the throttle, otherwise it will destroy the oil nozzle measuring hole, and the oil injection measuring hole will also make it difficult to start.

5.If the repeated operation 3-5 times can not start, it must be that the technical state of the machine is not good, and the fault can be checked and eliminated according to the "troubleshooting method" later.

Measures to control the fire of the fog machine?

Hello, I want to ask how to use it or how to protect it when breathing fire.

1.Place the machine in a flat and dry place, and there shall be no flammable or explosive materials within two meters from the spout. 2.

Pump with a pump or pump to fill the inlet line with gasoline. 3.Pump the oil first, press the power switch with one hand, turn on the circuit, operate the pump with one hand, and make a continuous sound until the engine emits a continuous sound, hear the sound of uniform and stable frequency, you can let go of the power switch, and stop pumping, and then fine-tune the oil needle hand wheel to the engine to send out a crisp, you can start the smoke operation.

4.If it fails to start at one time, first check whether the gasoline is in the oil pipe at the inlet of the oil nozzle, and too much fuel enters the carburetor, and it is not easy to start. At this time, you need to close the throttle and blow the oil dry with a pump until you hear a ** sound.

Repeat the above starting procedure, pay attention to not use too much force when closing the throttle, otherwise Chunxiang will destroy the oil nozzle measuring hole, and the oil injection measuring hole will also make it difficult to start. 5.If the repeated operation 3-5 times can not start, it must be that the technical state of the machine is not good, and the fault can be checked and eliminated according to the "troubleshooting method" later.

Hello dear! Glad you asked a question or question: There are two main types of common fog machines:

1. Thermal Fog Machine: The hot smoke machine produces smoke by heating a special liquid, which will turn into steam after heating, thus producing smoke and dissipation. 2. Cold Fog Machine:

The cold fog machine uses the air flow of the air to suspend the liquid after spraying it out, and then the humidity and temperature of the air control and condensation smoke. Cold fog machines are characterized by the fact that they can create very fine smoke and are relatively safe and can be used for a variety of indoor activities. At the end of the answer, thank you for your question, I hope it will be helpful to you, and I wish you a happy life

Summary. One of the ways to produce smoke is to spray it into an air body. Generally speaking, smoke is the effect of heating stage lights with e-liquid through a special smoke machine.

Creating some smoke in the air e-liquid will enhance the effect of the stage lighting, because after spraying dry ice, only the smoke medium can be added to produce smoke. Because the smoke density of dry ice is higher than that of air mass. One is the water mist produced by the vaporization of dry ice.

Dry ice is great for setting the stage mood. The smoke medium is also called the smoke carrier, water. Stage smoke is generally made of dry ice.

Commonly known as aerosols, there are many types. It would be better to spray dry ice smoke, such as diesel, which is a thin smoke floating in the air. Farmers who have used a fog machine know it.

There is a converter in the fog machine, and you can turn it on.

One of the ways to produce smoke is to spray it into an air body. Generally speaking, smoke is the effect of heating the stage lighting with danyou e-liquid through a special smoke machine. Creating some smoke in the empty smoke oil will enhance the effect of the stage lighting, because after spraying dry ice, only the addition of smoke medium can produce a smoke mold that is durable.

Because the smoke density of dry ice is higher than that of air mass. One is the water mist produced by the vaporization of dry ice. Dry ice is great for setting the stage mood.

The smoke medium is also called the smoke carrier, water. Stage smoke is generally made of dry ice. Commonly known as aerosols, there are many types.

It would be better to spray dry ice smoke, such as diesel, which is a thin smoke floating in the air. Farmers who have used a fog machine know it.

Cherry trees, with what raw materials to produce smoke.

Enquire now. Generally, firewood and grass with larger smoke and slightly damp are used as raw materials, such as in order to improve the effect of frost prevention, more firewood and grass can be put in the upwind direction

Hello dear, the fog machine generally uses a special liquid to produce smoke, which is called smoke liquid. The smoke liquid is caused by the vibration and ultrasonic waves generated by the high-speed oscillation plate of the fog machine, which causes the macroblind smoke liquid molecules to vibrate violently, thereby releasing a nucleus of water molecules from tiny to nanometer level droplets, forming white smoke. This smoke liquid is generally made from a mixture of purified water, binders, surfactants, preservatives, and other ingredients.

When using the fog machine, please pay attention to the product manual, and use the smoke liquid produced by the manufacturer to ensure product quality and safety.

Hello, (1) the spraying time must be strictly controlled: spraying with the fog machine is to distribute the pesticide to each part of the fruit tree and orchard in the form of fog under the action of the fog machine, the longer the fog stays in the orchard, the more evenly distributed, the better the effect. However, the duration and uniformity of fog are affected by many factors, such as wind and pressure.

In general, the lower the air pressure, the less wind, preferably in the absence of wind, the better. Therefore, it is important to spray at 4-6 a.m. or 6-8 p.m. when there is no wind. (2) Reasonably determine the amount of medication:

Spraying with a mist machine can significantly reduce the amount of medication compared with spraying with a medicine pump. The practice of several years has shown that the drug can be sprayed according to 6 0% of the amount of the pump. The amount of pesticide can be appropriately reduced after the operation is proficient.

3) Correct selection of pesticide varieties: usually spray with a medicine pump, and spray 6-7 kinds of drugs at a time, or even 8-10 kinds of drugs. The use of mist spraying to minimize the types of drugs, can use a medicine to treat pests and diseases, it is best not to use two drugs to control.

It is necessary to select the main types of pests and diseases in the orchard, and select the varieties of pesticides that have good treatment or both treatment effects. In addition, try to choose an emulsifiable concentrate preparation to prevent excessive or continuous use of the agent, which will produce smoke and charcoal and clog the nozzle.

Cold fog machines and fog dispensers are common atomization equipment, and they have a wide range of applications in industrial, agricultural, and domestic environments. Although they are both atomizers, there are some differences in their working principles and application scenarios.

A cold fogger is a device that produces small water droplets by rotating or vibrating at high speed. They typically use high-pressure nozzles to spray a mist of water into the air, creating a fine mist of water. After the spray, the cold fogger can use its built-in fan to evenly distribute the water mist into the room or warehouse, thereby raising the humidity in the air to the right level.

The water mist sprayed by cold foggers is typically between 10 microns and 50 microns in size, and they can remain in the air for longer periods of time without landing easily, transporting more moisture to environments that require humidity regulation.

The working principle of the mist machine is different from that of the cold fog machine. They create water mist by heating water and converting it into steam. The mist machine can also use ultrasound to atomize water.

These devices typically spray water mist into the air through a built-in fan, causing them to quickly spread around and mix with the air. Unlike cold foggers, the water spray emitted by fog mist machines is generally relatively small, usually between 1 micron and 10 microns. Since the water mist is very fine, they stay in the air for a short period of time, so the mist machine needs to be placed near the area where humidity regulation is required.

In addition to the difference in working principle, there are different application scenarios for cold fog machine and fog machine. Cold foggers are commonly used in large industrial and agricultural facilities such as production halls, storage silos, and cooling towers. They can also be used in home settings such as bedrooms, living rooms, and burial offices.

The fog machine is more suitable for small, closed rooms, such as bathrooms and saunas.

To sum up, the working principle and application scenarios of the cold fog machine and the fog machine are different. Choosing the right humidity regulator should be based on different needs. <>

Kiss! Hello, happy to answer your <>

Pro, Guda agricultural electric sprayer portable mist machine is good, multi-functional sprayer air head high-pressure blower. Most of the fogging machines are due to the blockage of the nozzle or the problem of the secret closure of the fog. Cause.

1. The nozzle of the fog machine is blocked. The key channel through which the mist machine can spray fog is the nozzle of the spray bottle. Moreover, the nozzle of the mist machine is composed of a plurality of extremely small holes, if the liquid in the mist machine contains a certain amount of solid particles, in the process of spraying the mist machine, these solid particles will inevitably be blocked at the nozzle of the mist machine.

This directly causes the occurrence of the phenomenon that the fog machine cannot spray fog. Solution 1: Lao Shenjing opens the spray bottle and cleans the nozzle of the spray bottle to make the small holes of the spray bottle nozzle unblocked.

I hope mine can help you <>

If you have any other questions, you can ask me again<>