My computer screen is very dark and the text is very blurry, what should I do?

Because of the aging of the display, try to change the resolution and refresh rate If it doesn't work, then it means that it can't be replaced It is recommended to replace it with a new one It is definitely not good for the eyes to look at it for a long time.

The monitor is related to your health, change it, the recommendations are as follows:

Economy Daewoo 719BF, 799

Performance AOC 786P, Diamondtron M2, 1199

2。Liquid crystal. 15"The best LCD resolution is 600 x 800, recommended: Xiaoyingba KF150B, with no bright spot guarantee.

17"LCD best resolution 1024 x 768, recommended: BenQ FP71G+S, DVI-D interface, 2399

19"LCD best resolution 1024 x 768, recommended: Metz JT198A, DVI-D interface, 2599

Aging it, the voltage is not enough.

Either change it or fix it.

It is recommended to degauss it, and if it is an old monitor, it is recommended to repair it.

Display aging.

Solution: Go buy a new one.

Summary. Hello, the solution to the black and blurry font on the computer desktop is as follows: Method 1:

1. Open the Windows system resolution setting page, click the drop-down menu, and select the screen resolution as the [Recommended] setting; 2. In the page with the [System Resolution] setting, click the [Enlarge or reduce text and other items] option in the page; Click the [Adjust Clear Type Text] option on the left side of the page to enter the settings page; Click to check the [Enable Clear Type] option box, and click the [Next] button; 3. According to the text message displayed on the computer monitor, select the one you think will be displayed most clearly, and click the [Next] button; Finally, click the [Done] button to complete the adjustment of the font display clarity on the screen.

Hello, the solution to the black and blurry font on the computer desktop is as follows: Fang Xiaohuai method 1: 1. Open the Windows system resolution setting page, click the drop-down menu, and select the screen resolution as the [Recommended] setting; 2. In the page with the [System Resolution] setting, click the [Enlarge or reduce text and other items] option in the page; Click the [Adjust Clear Type Text] option on the left side of the page to enter the settings page; Click to check the [Enable Clear Type] option box, and click the [Next] button; 3. According to the text information displayed on the computer monitor, select the one that you think is the clearest and clear, and click the [Next] button; Finally, click the [Done] button to complete the adjustment of the font display clarity on the screen.

Method 2: 1Find the "This Computer" icon on the desktop of the computer, right-click the icon, and select "Properties" in the pop-up interface.

2.Once you are in the "Properties" interface, drop down the menu and find the "Advanced System Settings" option. 3.

After selecting the "Advanced System Settings" option, find the "Performance Settings" option in the pop-up debate page5Click to open the "Performance Settings" option, no additional settings are required, just check the "Adjust to Best Performance" option, and then click "OK" below. 6.

Once set, all fonts and related settings on your computer will be reset according to the "best settings", so that the fonts will not appear to be shady or blurry.

1. First of all, right-click the mouse on your computer's desktop and select Personalization from the pop-up menu as shown in the image below.

2. Next, enter the personalized management window and click [Display] in the lower left corner, as shown in the figure below.

3. Then, in the pop-up window, open the Adjust clearType text in the left navigation menu, as shown in the figure below.

4. Next, check [Enable Clearing Type] and click [Next] to directly see the difference between checking and not checking, as shown in the figure below.

5. Then, at this time, you should select the clearest text box, and then click Next, as shown in the figure below.

6. Finally, click the Finish button in one step, as shown in the figure below.

In the process of using the computer, it may sometimes occurThe computer screen is blurryThe condition that makes us use it is laborious, so why is the computer screen blurry? What to do if the computer screen is blurry? Below we will answer them one by one, I hope it can help you.

What to do if the computer screen is blurry?

1. Incorrect resolution adjustment: LCD computer screen is different from CRT computer screen, each LCD computer screen has its own optimal resolution, if you use a non-optimal resolution, it will definitely be blurry. But some users don't care about these, whether it is a widescreen general screen, all with 1024*768 or 1280*1024 resolution, then most computer screens must be blurry and flickering, with water ripples.

The problem solved is also very simple, just adjust the computer screen to the best resolution. The method of adjustment is also very simple, right-click on the desktop to select the attributes, click on the settings, and pull the scroll bar of the screen to divide the manuscript and the resolution of the column.

2. Most computer screens have an auto key, which can be solved with a light press: it can be said that all computer screens will have this problem, including LCD and CRT. The solution is to use the "auto" key on your computer screen.

Many computer screens provide this button directly and can be pressed directly. If your computer screen is not available, you can go into the menu to look for it, 90% of the computer screens will be provided, some computer screens are directly called "auto", and some computer screens are called "automatic adjustment", in fact, they all mean the same thing. If you can't find this item after searching for it, then click "Reset" to restore the computer screen to its default, and 99% of the computer screen points will automatically adjust to the best state.

3. Counterfeit and shoddy wires are the source of the bane, and inferior wires are the bane: the following three types of wires are commonly used to connect the computer screen to the host, VGA cable, DVI cable, HDMI cable, and uncommon DP cable. In addition to the DP line, the other three kinds of wires are quite cheap, 5 pieces, 10 pieces of one, this price is a fair price, and the quality of most of the wires is no problem.

But if you occasionally click on the back, it is possible to catch up with the inferior wire. If the two methods mentioned above do not solve the problem after trying, you need to ask the stool to study whether there is a problem with your cable. The easiest solution is to change the cable to the computer screen.

4. If you don't turn off the computer screen, the graphics card of the host is malfunctioning: the computer screen has water ripples, and the author has seen it twice because of the problem of the host. The specific fault performance is that the same host, no matter what computer screen is replaced, will always have water ripples.

This problem can be said to be a hard injury, even if the host is sent for repair, most of it will not be solved. The easiest way to do this is to add a graphics card to the barebones system (if you can). After adding, it can solve the problem almost 100%.

The above is brought to you why is the computer screen blurry? What to do if the computer screen is blurry? All of it.

This situation may occur if there is a problem with the graphics card, a bad data cable for the monitor, and a problem with the monitor, so try to replace it.

Try right-clicking on the desktop Properties to set the Advanced monitor screen refresh rate.

If you change it to a higher level, it's about 75-85, and it's not vague yet.

When it is damp, do not leave the monitor on for a long time, turn it on and burn it every once in a while, and put the desiccant in food or medicine (such as the desiccant in the Want Want gift bag) behind the monitor will have a moisture-proof effect.

It may be a hard injury, the picture tube of the display is old, the warm-up time is long, there is no way, the best way is to replace it.

1. Please reset your computer resolution

Steps: Right-click Properties to set Resolution;

2. Please confirm whether your graphics card driver is installed;

Good luck

Yes, if you feel annoyed that it is super slow, it means that you have a problem with the performance of your computer, after all, it has been used for many years! And you can reinstall the system! You can also adjust the screen resolution, the higher the resolution, the clearer!

Based on your situation, it is recommended that you try to reinstall the system, and if it still doesn't work, you are ready to change the computer.

It may be a problem with the resolution, right-click on the "Properties" on the desktop, click the "Settings" tab, and then turn the screen resolution higher!

The color quality is tuned to 32-bit!

Monitor hardware failure.

It's not the voltage problem, maybe the line is damp and dusty, and the high-voltage package is caused by ignition, so you should find a professional to repair it. Otherwise, there will be a danger of **.

You can skip the resolution and other things yourself, but if you still can't do it, you can go to the manufacturer, there is also a possibility, that is, the computer monitor has been used for too long, so it is blurry, just let the monitor rest for a while.

You should be a pure screen monitor, don't worry... This is the reason why the display is damp, and you can turn it on for a while. But don't let the display get damp too often, it's easy to age...

When storing, you can wrap it in a thicker cloth. It would be much better. Just a cool, dry place.

There are several scenarios:

One: It's dust on the screen, just clean it up. 2 is the aging of the display, if you use a CRT monitor, it is recommended to replace it with a new one, because it is the aging of the picture tube circuit inside.

Generally speaking, CRT is now facing obsolescence. 3: Is there a big interference next to it?

Affect the computer.

It should be that the display is broken, go to the repair shop, this is a small problem about 100 yuan.

If it's CRT, it's probably damp. If it's an LED, the cable may be broken, phenomenon: ripple, trembling.

Has your graphics card driver been updated?,Generally this is the case that the driver is too old.。

Update the graphics driver. Then there's the right click. Attribute. Set up. Adjust the color quality to 32-bit.

There are two reasons why your computer suddenly becomes blurry

The first is because the resolution is not adjusted well, and the solution is as follows:

1. Right-click on the screen resolution option on your desktop.

2 Click on the option of Resolution (R) to adjust the resolution size and adjust the corresponding screen and font.

The second is because the card driver is damaged or the graphics card driver is not installed, and the graphics card driver can be reinstalled.

First, adjust the resolution according to the highest resolution of the monitor, then open Notepad, maximize the window, fill the number 8 in full screen with the smallest font, and then automatically adjust the display (clock, phase, horizontal, vertical) through the display button auto, and then connect it clearly.