If the broadband 813 is up, how can I dial up?

Error**: 813 With a previous broadband connection, you are trying to establish another broadband connection using the same device or port. Please disconnect the previous connection and re-establish the connection.

General solutions.

1. First confirm that the adsl modem dialing is normal, because the IP automatically obtained by the network card is not cleared, so when dialing again, the network card cannot obtain a new IP address and will prompt 678, the operation method is: turn off the adsl modem, enter the network connection of the control panel and right-click the local connection to select disable, after 5 seconds, right-click the local connection to select enable, and then turn on the adsl modem dial-up;

2. If the first step is invalid, then in the case of turning off ADSL MODEM, still disable the local connection (network card), restart the computer, then enable the local connection (NIC), and then turn on ADSL MODEM to solve the problem;

3. If the above steps cannot be solved, check whether the NIC light is on.

4. If the NIC light is normal, step 1 and 2 cannot be solved, lead the user to uninstall the NIC driver and reinstall the NIC driver.

5. If the above operation is invalid, contact the telecommunications department to confirm the port.

The 813 problem is usually caused by repeated dialing. Enter) or the ** of the telecommunications online business hall to try whether you can open the webpage directly. If it can't be opened, please turn off the cat and the computer, and then restart the test after 5 minutes, if it still doesn't work, it is recommended to find a computer maintenance personnel to check the computer system.

What should I do if 813 appears in broadband? The 813 problem is usually caused by repeated dialing. Enter) or the ** of the telecommunications online business hall to try whether you can open the webpage directly.

If it can't be opened, please turn off the cat and the computer, and then restart the test after 5 minutes, if it still doesn't work, it is recommended to find a computer maintenance personnel to check the computer system. To learn more about service offers, click on the "****" customer service 222 below to answer for you.

When dialing up the Internet to cheat filial piety, users often encounter the problem of prompting error**Unable to connect to the network,This time, the user under the win7 system prompts an error when the broadband connection is carried out**797,What's going on? How to solve it?

Symptom Analysis: Error 797: RentBi Script did not establish a connection to the Remote Access server because the modem could not be found.

Solution: 1. First of all, broadband connection error 797 is mostly caused by hardware failure, especially the failure of the cat.

2. Then you should check the properties of the network and whether the relevant network protocol is correct. If not, the correct network protocol should be installed.

3. Then check the NIC driver, whether there is an exclamation point and the situation that it cannot operate normally.

4. Then check the properties of the dial-up connection, or consult the operator's customer service to ask if there is a problem with your port.

5. Finally, check whether the connected Huinai device uses a device called ISDN Channel, the wrong connection of this device may lead to the situation of 797, if so, cancel the device to rebuild the network connection.

6. If it is a protocol problem, you must make a backup before changing, if not, you can also redo the system installation protocol.