Water in water colorful paint, I made three colors, how are the colors different

How to tell you, there is a color paint every time it is made, the color difference of the small factory is very large, like Nippon Paint Company is very small, because the content of the color paste is unstable, how much color paste you added last time this time is not the same, it is impossible to do exactly the same, and the color of the water in the water is also related to the density of his spray, the density is not the same, the color is also changed, it is best to do it in a factory, in exchange for the color must be different, if you only have a point, each factory will not seriously adjust for you, water bag water background color and point, the background color is not the same spray effect and color is very different, and the color will be darker than the brush oil on the brush, I am a paint manufacturer, I hope mine will help you, please.

Each company has its own technology and process, and the products produced are definitely different.

It is recommended to use a paint and coating, otherwise there will be a large color difference when mixed.

Branch paint is good!!

It should be that the color card of each house is different, and there is no unified standard for the color card.

The use of paint can bring very good results to our home decoration, but sometimes it may be because of the debugging, or the construction of the paint color difference, affecting the effect of decoration, so in order to ensure the effect of decoration, it is necessary to avoid the above situation, if it happens, find the cause, and then look for solutions to solve the color difference of colorful paint.

Chromatic difference is a common problem of exterior wall paints, whether it is colorful paint or ordinary exterior wall paint, almost no paint supplier can guarantee that "my colorful paint has no color difference". Many manufacturers who claim "no color difference" are nothing more than adding artificial colorant dyeing, but this will make the construction quality of colorful coatings extremely unstable, such as color shades.

1. Poor color retention, reduced weather resistance, etc. However, in fact, as long as the color difference of the colorful paint is controlled within a certain range to ensure that the color sprayed on the wall is roughly the same, the color difference problem can be "solved".

1. Ensure the stability of raw materials for colorful coatings.

High-quality raw materials for colorful coatings mainly refer to emulsions and color particles, and the stability of water-in-water raw materials mainly depends on the "support" of the first business to colorful paint manufacturers. Obviously, the first business will not treat every customer equally, and must give priority to supporting "long-term strategic cooperation customers", which actually refers to "long-term purchases" customers. According to the same batch of customer dosage in advance, to help customers in the production process to achieve the minimum color difference control.

2. Increase the single-cylinder production capacity of colorful coatings.

Most of the paint is filled, and the larger the capacity of a single cylinder, the easier it is to control the color difference of the colorful paint. 30 tons of colorful paint, 1 and multiple production completed, the color difference is absolutely different. Generally, the larger the capacity of a single cylinder, the easier it is to control the color difference; On the contrary, the more batches of multi-colored paint produced in the same color number, the greater the color difference.

3. Construction management of colorful coatings.

The larger the order quantity of water-in-water colorful paints, the more difficult it is to control the color difference in production. For 200 tons of paint, the production batch will take 3-4 times, and the small manufacturers will even reach more than 10 times, or even more. In addition, in the construction process, it is necessary to ensure that each batch of colorful paint is sprayed on the same wall, and if different batches of paint need to be mixed, all raw materials must be mixed evenly, and finally a bucket or half a bucket must be reserved for later repair.

Summary. After a long period of placement, the pattern ions in the water-in-water colorful paint will sink.

Can water-in-water colorful paint still be used after paste?

Hello, it's an honor for me to answer your questions, it will take a little time to sort out the answers, please be patient

Water-in-water colorful coatings will inevitably encounter various problems in production and construction, such as color dot size, raw material matching, storage, stability, cracking, flowering, etc., so it is necessary to have enough understanding and awareness of water-in-water in the early stage, timely prevention, and common problems of water-in-water colorful coatings.

It's better not to use this Hello.

I am the owner of the paint factory, I have a few tons of Nippon Paint water-in-water colorful paint, the rest of the project is used, because the time has been three years, it has been pasted, please can I use it.

Hello dear, I advise you not to use this.

But there's no way to dispose of it.

Dear, then don't use it, it will be very troublesome after using it.

After a long period of placement, the pattern ions in the water-in-water colorful paint will sink.

We have tried mixing it in a brushed middle layer of paint after high-speed dispersion, but the water resistance and adhesion will be reduced.

Hello Yes.

You've used it best.

The main thing is that there is no place to dump it, and the environmental protection will be held accountable.

Then you can find a place where no one knows about it.

Use a filter press to stick the filter cloth and plug it.

That's not easy.

Do you still have a lot of that? Remember to take care of it.

Is colorful the same as water-in-water: dear, I'm glad you asked! Colorful paint is not the same as water-in-water, multi-colored paint is lacquer, while water-in-water is milky paint.

Sand in water is a coating product imitating lychee granite stone, which successfully breaks through the technical barrier of high suspension multi-layer dispersion of solid and liquid fusion, and organically combines the two components of water-in-water and water-in-water paint to achieve two-in-one in the formula production. Colorful paint is two or more water-based color particles suspended in the water-based intermediary, through a spraying to produce a variety of colors with the canopy is missing in the building exterior wall of the orange field one-component paint, it is the use of acrylic silicone resin emulsion and fluorocarbon resin chain emulsion coating as the base material, combined with high-quality inorganic pigments and high-performance additives, breakthrough in the coating chemical theory, through a special process to process the water-based exterior wall colorful coating.

The main reason for the coating of colorful paint is that its color is not restricted, relatively speaking, the real stone paint is restricted by the color of natural colored sand, in addition to the real stone paint system is more perfect than water in water, after all, the development period of water in water is still somewhat short.

Water-in-water is the texture of imitation marble, while real stone paint is the material of imitation marble. Real stone paint is emulsion + color sand + additives; Water-in-water is emulsion + color particles configured by paint + additives. It is recommended that you go to Sanyin Paint to ask, and there are professionals there to answer questions.

Colorful paint has a certain correlation with real stone paint, but it is not a product.

Water-in-water is the texture of imitation marble, while real stone paint is the material of imitation marble. Real stone paint is emulsion + color sand + additives; Water-in-water is emulsion + color particles configured by paint + additives. It is recommended that you go to Jianrong Paint to ask, there are professionals there to answer questions.

What is the difference between the decorative effect of multi-colored paint and ordinary paint?

1. Colorful: ordinary architectural coatings can only show one color at most at a time, if sprayed with a variety of colors, often need to replace the paint many times, and need to use the groove edge and the form of the section to present; However, multi-color paint can show a variety of color patterns in a single spray without the need for secondary processing. According to different work sites, different colors can be adjusted by changing different background colors to bring out different atmospheres.

2. Novel modeling: its composition principle is different from that of ordinary architectural coatings, and it will retain the characteristics of colorful patterns after spraying, and this pattern presents a kind of irregularity, which can form different visual effects of depth and pattern on the wall through the size of colorful particles, which is not possible for general coatings. And the wonderful thing is that the accumulation of this particle is not veneer or messy, and often shows a certain regularity, so it gives a unique decorative effect.

Therefore, skilled operators can spray different shapes of patterns.

3. Strong three-dimensional effect: the surface of the colorful paint is soft and not rough, and the colorful paint sprayed by the airless sprayer has a great three-dimensional effect.

The colorful lacquer pattern is rich in color, and the colorful pattern coating is mainly to add emulsion and other gelatinizing substances to the basic coating, so that on the surface of the original single coating, there are some colored particles of different colors and shapes, which is a composite suspended dispersion coating. The biggest difference between it and ordinary coatings is that the appearance of the surface coating is more 3D three-dimensional, which subverts the limitations of previous coatings, and has the characteristics of acid and alkali corrosion resistance, washing resistance, pollution resistance, friction resistance, etc., and can be used on the surface of a variety of substrates.