Huawei computer WRT w09 does not enter the system after booting, and it keeps showing that it is pre

If this situation occurs, the system file has been corrupted, resulting in an incomplete system, so the boot system will automatically try to repair it, and if it cannot be repaired, it means that the system file has been irreversibly damaged.

There are basically three reasons for this:

The first is when you mistakenly delete or destroy some system files when you use your computer properly.

The second is because the installed software or plug-ins are not compatible with the system and conflict.

The third possibility is that the system is malfunctioning due to a virus.

For the second and third cases, you can press F8 immediately after booting up (it is pressed immediately after booting, press it a few more times to enter, if this doesn't work, just look at the third step), select "Last correct configuration" to enter the computer. If not, turn on the phone and press F8, select "Safe Mode", and delete the recently installed software and plug-ins after entering, and disinfect the virus.

For the first case, if you know what files are deleted, you can correspond to the missing files, and then enter the "safe mode" according to the second step, and fill in the missing files; If you don't know what system files were deleted, you can only reinstall the system.

The automatic repair of the boot may be related to the improper operation before you shut down, such as: playing games, watching, operating large things, using the computer for a long time caused by the card, or inappropriate things, or deleting system files, or power off and shutdown, etc., the failure will not occur for no reason.

The solution is as follows:

1. The system may be malfunctioning due to a virus. Use anti-virus software for detection and anti-virus.

2. Because the installed software or plug-ins are not compatible with the system, there is a conflict. Remove the conflicting software.

3. If the reinstallation is also repaired, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, uninstall all the inappropriate things before the accident, or restore the system or reinstall it, if the computer is win8, you can't enter the system is not in safe mode, only reinstall.

Check whether the hard disk of the computer can be recognized, if it can't be recognized, the hard disk is broken, if it can be recognized, it may be that the boot is damaged, just fix it.

This problem should be that the hard disk is broken, it can't be replaced, it's not easy to repair, and you can only replace the phone.

1. Turn off the computer and turn off the power. Open the chassis to check whether the cables of the hard disk and other hardware are loose, and the loose cables will cause problems in the data transmission of the system. Plug the cable back in, plug it in, and restart your computer.

2. If there is still a problem that Windows fails to start, select "Latest Correct Configuration" in the Windows error recovery interface, and then if it can be turned on normally, it may be a problem of forced power failure.

3. Press F8 to enter the advanced boot option during the boot process, and select to enter the safe mode, and restore the system to the state that can still operate normally before in the safe mode.

4. If you can't enter the safe mode, the system is seriously damaged and you may need to reinstall the system. In the case that the system cannot be accessed, the system can be reinstalled through a USB flash drive.

Hello, if the computer Huawei windows can not start, this is your computer system is broken, you have to reinstall a system, install windows10 on it.

If your Huawei computer wrt w09 does not enter the system after booting up, but keeps showing that it is preparing for automatic repair, it can be caused by system file corruption or other reasons. You can do this by following these steps:

1.Wait for the automatic repair to end, if the automatic repair fails, you can try to enter the system repair mode manually;

2.After entering the repair mode, you can choose options such as "Fix Startup Failure" to repair;

3.If the repair still doesn't work, you can try to reinstall the system, and you need to pay attention to backing up your critical data;

4.If you still can't solve the problem, we recommend that you contact Huawei customer service for help or go to a professional repair center for repair.

It should be noted that when repairing or reinstalling the system, you need to be cautious and back up your important data before the operation to avoid data loss. When using the computer on a regular basis, it is recommended to turn on the security software and perform regular system maintenance to avoid failures.

The Huawei computer wrt w09 does not enter the system after booting up, and it keeps showing that the family is preparing to be repaired automatically, which may be due to a system failure or a damaged hard disk. This can be solved by:

1.Try restarting your computer and try to fix it several times.

2.If you still can't boot after restarting it multiple times, you can try pressing F8 or F12 to enter safe mode or the options menu to repair the system.

3.If it still doesn't solve the problem, you can try to reinstall the system using a disc or USB stick, or send your computer to a professional machine shop for repair.

4.To be on the safe side, remember to back up important data during the process.