Win10 lock screen flashback, can t display the login password box normally?

1. First of all, we click on the "Start Menu", and click on the "Settings" icon in the Start Menu, as shown in the figure below;

2. Open the Windows Settings interface, find "Update & Security" and click to enter;

3. After turning on Update & Security, click the "Restart Now" button on the left side of "Recover" on the left side.

4. The system automatically enters the security operation interface and selects "Troubleshooting";

5. Click "Advanced Options", as shown in the figure below;

6. Click "Startup Settings" in the interface of advanced options;

7. Click the "Restart" button in the interface of the startup settings;

8. After restarting, press [F4] or 4 on the pop-up startup setting interface to enter "Safe Mode", so that you can log in normally;

9. Enter the system and press win+r to open and run, enter: "msconfig" command and click OK to open the system configuration;

10. Click [Normal Start] in the general options of system configuration and then click OK, and after restarting the computer, the win10 boot password input box can be displayed.

It's because of the computer setup problem you came to;

1. Click "Start" - "Run" and enter cmd to enter the command line.

2. Enter "control userpasswords2" in the entry line, pop up a user account, click on the "high self-level" tab on the top, and there is a checkbox in the "secure login" item below "Require users to press ctrl-alt-delete" and then confirm that you don't need to press ctrl-alt-delete next time you boot up.

You should have set up the user or boot login interface and changed the theme to cause this, you can enter PE to clear the boot password to see if you can directly enter the system.

This situation is very common, jumping from one program to another, it takes up a lot of memory, at this time, it is easy to crash, just shut down and restart.

Did you set up automatic login when you booted up?

In the past, many netizens wanted to set up the situation of automatic login without entering the password when the computer was turned on, and the specific method was: press the win+r key to enter netplwiz in the dialog box and then a user account menu appeared, and cancel the tick of that option (to use the computer, the user must enter the user name and password). Then double-click on the account you want to log in to automatically and enter your password.

Or delete the user you created directly in the management, and use the administrator user that comes with the system, which is directly into the system by default.

This is just a temporary phenomenon of suspended animation in the system, and it is not a big problem.

1. Click the Start Menu --Settings button to open Windows Settings;

2. Open the settings interface and click the [Account] option;

3. Click [Login Options] on the left side of the account interface;

4. Under [Privacy] on the right, turn it off: After updating or restarting, use my login information to automatically complete the device settings and reopen my apps The switch can be turned off!

After operating through the above methods, you can effectively solve the problem that the password input box cannot appear when clicking on the keyboard in the win10 lock screen interface!

First, right-click on the blank space on the desktop, and then click Properties, and the Properties dialog box will pop up.

Then tap on the screen saver, and after clicking OK, the screen will be automatically locked.

If you want to change the screen saver, you can tap the drop-down menu of the screen saver and select the appropriate one from the menu.

If you need to make your screen saver more personalized, you can click the settings button on the right, and then you can choose to set parameters such as flight speed and star density, and you can click to preview to see the effect after setting.

You can also set the waiting time, such as about 5 minutes, depending on the time when the individual usually operates the computer, you can check the right "Use password protection when recovering", that is, you need to unlock the screen and enter the password.

You can also click the power button in the lower right corner to set energy saving for the computer, adjust the power option properties, such as how long to turn off the monitor, whether the computer needs to standby, etc., you can set it yourself.

It may have something to do with the system. It is recommended to send the computer to the official ASUS after-sales service center, and a professional maintenance engineer will conduct a comprehensive inspection to confirm the fault and necessary repairs. The maintenance, cleaning and upgrading of the whole machine of the brand computer is best done at the official after-sales point of the corresponding brand, and the maintenance skills and specifications of the engineer are definitely more formal and assured, which can ensure the quality of maintenance.

The official after-sales service center of ASUS can be found in the following sections of the official website:

It feels like you're in this state.,,I can't get out of the password input interface,,Blindly press enter sometimes to get in,,Is the landlord's problem solved now?

Brother, I think you should have solved it by now.

Because the default password input window is not realistic after booting, but a screensaver.

All you have to do is press enter, and you'll see the password window.

My notebook is logged in directly with my fingerprint.,No password.。

In the lower right corner, click on the on-screen keyboard, can I bring up the virtual keyboard?

Take a picture with your phone, brother!

There's a fingerprint unlock, isn't that cool? Only your fingers can open.

You solve the problem that there is no I am locked and then enter the dialog box where there is no password entered, only restart.

I also have the same problem, may I ask the big brother how did you solve it.

1. First of all, we click on the "Start Menu", and click on the "Settings" icon in the Start Menu, 2. Open the Windows Settings interface, find "Update and Security" and click to enter;

3. After turning on Update & Security, click the "Restart Now" button on the left side of "Recover" on the left side.

4. The system automatically enters the security operation interface and selects "Troubleshooting";

5. Click "Advanced Options", as shown in the figure below;

6. Click "Startup Settings" in the interface of advanced options;

7. Click the "Restart" button in the interface of the startup settings;

8. After restarting, press [F4] or 4 on the pop-up startup setting interface to enter "Safe Mode", so that you can log in normally;

9. Enter the system and press win+r to open and run, enter: "msconfig" command and click OK to open the system configuration;

10. Click [Normal Start] in the general options of system configuration and then click OK, and after restarting the computer, the win10 boot password input box can be displayed.

If the driver can be used, it is not recommended to update the driver, or install the driver that was good before.

If you can't boot up,The system you use is win7 or xp boot press f8 to see if you can enter the safe mode,If you can enter or install the previous easy-to-use driver,If you are ready to restore the system,win810 is booted into the system to enter the safe mode,If these systems can't be turned on, they have to be reinstalled。

If you are not installing the system when you bought a computer, it is recommended to install the system that was pre-installed when you bought a computer.