Computers often crash blue frequency. Ask for help

The picture is too small to see.

High temperature should be CPU and graphics card.

Generally, the CPU temperature is easy to get hot there, which may be a fan problem.

Most you can see the temperature.

The reasons and how to deal with the blue screen that cause your computer to always be blue are as follows:

The first type: If your computer often has a blue screen, whether you have not reinstalled the system, or later reinstalled the system, or there is a blue screen, it means that it is a problem with your hardware, and the direct hardware is a memory module or graphics card. Generally, this is due to the blue screen phenomenon caused by the oxidation of the gold finger of the memory or graphics card or poor contact with the slot.

The solution is: you can turn off the power first, open the compartment, dial out the memory, use the eraser against the part of the gold finger (that is, where there is a copper sheet,) and wipe it back and forth a few times, and then change a memory slot to plug it back, it's OK, if you do this or a blue screen, you have to check the graphics card, indicating that it is a problem with the graphics card, and it is OK to do it with the same method as above. Generally, 80% of computers can solve the problem.

The second type: is the hard disk has a bad sector, when the computer reads the bad sector, it is stuck, the background is still running, the CPU occupancy is immediately very high, and then the blue screen, processing method: under normal circumstances, it is repaired with HDD, if it can't be repaired, which can only change the hard disk.

The third situation: that is, the video memory and graphics card's video memory chip appear virtual soldering, and the blue screen will continue to appear, the method is to add solder to the video memory is OK, the fourth is: the computer is poisoned, causing the memory to enter the virus, destroying the operating system, causing the system to be unable to boot, it has been a blue screen, where to reinstall the system, or one-click restore.

Fifth: It is because of illegal shutdown, such as power failure, forced shutdown, or sudden crash, after turning on, it will be self-checked, it is also a blue screen, in the countdown, under normal circumstances, let it read it by itself, it is OK, it may waste a little time, but it must read it by itself, because this is the process of checking the disk by the hard disk, generally read it for the first time, and it will not appear next time. Don't stop with ESC, you can't have a blue screen next time, start again.

If you want to self-test every day, you have to start after entering the system: start - run ---chkntfs t:0", and the general problem will be solved.

Before doing the above, it is best to restore the BIOS of the motherboard to the factory value, or you can discharge the motherboard battery, that is, remove the battery, wait for 20 seconds and then install it back, or connect the jumper to two or three, which is conducive to eliminating strange phenomena caused by the disorder of the motherboard BIOS.

The second of these is the one with the highest probability of causing a blue screen, and if you don't try to use it, 80% of the computer will be fine

1. Blue screen problem.

1 Software compatibility issues cause a blue screen on your computer.

If the driver is not compatible with the hardware and may lead to the blue screen phenomenon, it is recommended to install the driver in the hardware gift disc (to match the operating system used), and the driver does not need to pursue the latest!

There is no blue screen phenomenon after using the computer for a long time, and one day suddenly there is a blue screen, which is generally caused by memory problems caused by too much dust in the computer (solved by the methods mentioned below) and software and system compatibility problems. Or use the Windows System Restore feature to directly restore the system to the previous restore point for detection!

2. Poor contact of the memory module or memory damage causes the computer to blue screen.

During the operation of the system, almost all the high-speed data access operations are carried out in the memory, if the memory module is not in contact or damaged, the access of system data will be problematic, which can easily lead to the system blue screen and crash! Generally, poor contact of memory modules is caused by excessive dust accumulation in the computer, or the memory is not plugged in tightly! If you have two internal memory, you can unplug one of them for detection, and if you reinstall an official Microsoft original operating system and still get a blue screen, then you can definitely determine that it is caused by a hardware problem!

Solution: Clean the dust in the chassis, unplug the memory module, wipe the gold finger with an eraser, and then plug it in again.

3. Virus Trojans cause a blue screen on the computer.

Nowadays, there are more and more types of virus Trojans, there are various ways of transmission, and it is impossible to prevent them, some virus Trojans infect system files, causing system file errors, or causing system resources to be exhausted, and may also cause the occurrence of blue screen phenomenon, It is recommended to install antivirus capabilities to emphasize antivirus software, such as Kaspersky, NOD32, etc. for detection, but as we all know, the update speed of antivirus software is difficult to catch up with the speed of the virus, which requires us to practice the ability to manually check and kill viruses, and it is recommended to use process Explorer forcibly terminates malicious processes (Microsoft's officially recommended process monitoring tool).

An example of using Process Explorer to detect and kill viruses: the solution to the problem that the IE homepage cannot be modified by yourself after it has been maliciously modified.

4. Bad sectors on the hard disk cause the computer to screen blue.

Like memory, the hard disk will also carry some data access operations, if there is a bad sector in the area where the access and reading system files are located, it will also cause the system to fail to operate normally, resulting in a system crash and a blue screen on the computer!

Solution: Reformat the system partition after backing up important data (there will be an option to format when reinstalling the original Windows system), if the format is successful, it will not affect the use, otherwise you can only discard the partition or replace the hard disk.

1.Antivirus software is installed a lot, and all of them are monitored, less or no monitors are turned on, and viruses are often checked and killed.

2.If the software or driver is not compatible with the system, reinstall or upgrade the driver.

4.Memory, graphics card, and voltage instability can also cause crashes (if the memory is too small, add memory modules).

The cause of the blue screen of the computer may be incompatible memory, computer virus, program conflict, incompatible system patches, etc., and you can try to fix the blue screen caused by the software. Open the software, select the manual service, enter the blue screen in the search box, click Find Solution, find the blue screen that often appears on the computer, click Repair Now on the right side of it, and wait for the repair to complete and restart the computer.

It needs to be judged according to the blue screen**, it may be a system problem, it may be a hardware failure.

The computer often has a blue screen and freezes, analyzing the cause of the failure.

Seeing that the configuration you wrote also belongs to an earlier computer, how to troubleshoot the fault that caused the blue screen of death on the older computer?

The first thing you have to check is the memory, because you see that you are DDR2,667 memory If you add memory later, whether it is the same brand, the frequency is the same, if it is a different brand, different frequencies, it is more likely to have compatibility failures, the compatibility performance of the older motherboard is slightly worse, sometimes it is normal, you can turn it on, but after shutting down, you can't turn on it every other day, the solution is to remove all the memory first, install only one memory, and try to boot it up.

The next is the problem of the hard disk, see that you are using a mechanical, 160g hard disk, then you can use the hard disk detection tool to detect the health of the hard disk, if the health is poor, or there is a sector error, it is recommended to replace a new mechanical hard disk or a second-hand solid state drive.

The third is to check that the power supply of the host can be removed in the shutdown state and clean up the dust in the power supply, whether it is rated power or stability after the power supply has been used for a long time, there is still a big difference compared with the new time, especially the power dust is not cleaned up in time, it will cause, the temperature is too high and the heat dissipation is poor, resulting in the unstable operation of the host.

The last thing mentioned is that you said that the computer network display is normal but there is no data exchange, you can change the network cable of a product, the problem may be in the crystal header, or uninstall the network card driver and update the installation again.

Find a nearby repair shop, but I personally feel that it is a hard drive problem.

0x0000008e:kernel_mode_exception_not_handled

Error Analysis: A kernel-level application produces an error, but the Windows Error Processor doesn't catch it. It's usually a hardware compatibility error.

Solution: Upgrade the driver or upgrade the BIOS

0x0000008e:

Error Analysis: A kernel-level application produces an error, but the Windows Error Processor doesn't catch it. It's usually a hardware compatibility error.

Solution: 1. Check whether the memory is plugged in tightly, and whether the quality is problematic or incompatible.

2. Change and upgrade the drivers of the graphics card, sound card, and network card.

3. Please install the system patch.

4. Antivirus.

This problem: It is because I received a file that should not be received. This file can't be put out and is still in memory.

You can open the case and swap the memory for a bit, if it's two. First, take down the memory and insert one. Turn on the machine, enter the system, and then turn off the computer.

Plug in another one and you're good to go.