-
Forehead.. This problem is not easy to say, first of all, you have to determine whether the motherboard has water, if the motherboard is not stained with water, then at most you only need to change the screen, it will not have any impact on the mobile phone itself; And if the motherboard is wet, then it may indeed leave a hidden fault as the customer service said. According to what you said - even the water can be thrown out, which means that there is a lot of water - the possibility of water ingress into the motherboard is still relatively large.
As for the specific judgment ... It's not easy for us to say if we can't see the machine... Sensei said we can't see the real machine.,Even if it's sent to customer service.,If he doesn't disassemble the machine to look at the motherboard,,It's not conclusive.。。。
The words of the customer service lady are also not to be fully believed, 3 points are true and 7 points are false. She first said that the problem was a little more serious, and as soon as she came, she would report to you the ** that changed the board, so that you could be mentally prepared when you repaired. Customer service: We all know that's it
Hehe, that engineer probably didn't hear your question. The screen assembly and the motherboard are two parts that are completely separate (that is, the cover and the book in your metaphor), which are connected by three buckles (respectively, the tube earpiece, touch, display), and can be opened completely! (He said that if he couldn't open it, he told him not to be an engineer and go home and stay).
Now what you see is the screen assembly part of the water ingress, and the motherboard has to be dismantled to see if there is water. And what the engineer said about dividing into two halves means that the screen is divided into two parts (after separation, there are two parts: the touch screen and the display screen). This is a necessary step to clean up the screen from water ingress.
But it has nothing to do with checking the motherboard for water ingress.
Forehead.. Let's just put it in place. Touch screen = cover, display screen = title page, motherboard = main body of the book.
Now the water you can see is between the cover and the title page, the worst case is to replace the cover and the title page = replace the touch screen + replace the display screen = replace the screen assembly, and whether the body of the book has water, will it affect future reading, you have to open the title page to know. (The customer service lady directly reported the ** of the main part of the book to you, in fact, it does not necessarily need to be changed) And the engineer's statement that "the title page cannot be opened" is wrong.
-
Water ingress will short-circuit the circuit version, 3gs is a capacitive screen, water may affect the operation or even scrap, buy up 3gs and care about that 1600? I suggest you fix it. The iPhone is already expensive, how many of the 100,000 software do you use?
-
Fix it, my whole 3gs soaked mop floor water for 5 minutes, and it took 1598 to replace it from the inside out, which is equivalent to a new machine, OK.
-
I've heard that the iPhone will not get into the water if it has not been disassembled
-
How to deal with the water after the iPhone is ingressive.
1.Turn off the phone as soon as possible, cut off the power, and do not try to turn it on again to avoid causing a short circuit in the motherboard.
2.Remove the SIM card and use a tissue or cloth to remove water from the outside and crevices of the phone.
3.If there is light water ingress, you can wrap the phone with a paper towel, put it in a bag and put it in a small bag of desiccant.
4.The mobile phone cannot be turned on after entering the water, most of the chips such as the motherboard and CPU are short-circuited and burned, and it is recommended to send it to the after-sales service center for repair immediately.
Don't try the following wrong methods after your phone gets into water.
1.Don't shake your phone too hard. Because under the constant shaking, the liquid will swim inside the machine, and the moisture may enter deeper and burn the internal chip of the machine.
2.Don't use the hot air of a hair dryer to dry your phone for a long time. iPhones are now all metal bodies, and metal conducts heat easily, which will blow off the solder joints of the motherboard inside the machine, causing the motherboard to malfunction.
3.Do not attempt to charge a phone that has been flooded. An iPhone that gets into the water may have water stains inside, which can burn out the motherboard when it is powered on and cause a more serious failure.
4.Do not leave your phone in water for a long time. In the case that it cannot be used normally after two or three days after general treatment, it should be sent for repair immediately, and long-term placement will cause the motherboard to be corroded, or even unable to be repaired.
-
1. Do not move or shake the phone frequently after entering the water, so as to avoid the spread of moisture inside the phone.
2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.
3. Some mobile phones can be turned on normally after simple processing (Apple customer service center 010 5363 0616), but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.
4. It is recommended to bring your mobile phone to the regular Apple customer service center for inspection and maintenance.
-
Landlord. Send it for repair. The moisture inside is not dry. If you want to corrode the hardware, if you burn out the motherboard. You're at a loss.
-
iPhone6 is flooded and the white screen Apple icon is displayed when it is turned on, which has two situations.
Clause. 1. For system problems, you can press and hold the home button and the shutdown button for 10 seconds to force a new attempt.
If you can re-enter the system, it is a system problem, and if it doesn't, it is a motherboard problem.
Clause. Second, the main board problem.
This is because moisture enters the motherboard, causing the motherboard metal to rust and short circuit.
This kind of is not to change the motherboard entirely, clean up the moisture, and replace the rusty chip.
-
If you want to use sliced toast bread, what is the use of rice, and it's only been two or three days, it's not dry, and it can't be electrified, since it's too late, send it for repair.
-
Beijing Zhiyu Apple Repair Point Apple Repair iPhone4 4S Repair. Quickly fix you, iphone5 iphone3g 3gs iphone4 iphone4s water ingress, screen change, motherboard repair, apple certified engineer, chip level repair expert. Solve a series of problems with your iPhone for you.
iPhone does not turn on, does not charge, does not connect to the computer, flashes 160x error, flashes the machine but can't be brushed, flashes the dead loop, etc.; iPhone does not turn on, does not charge, automatic silent during call, call current sound, no signal, weak signal, no wifi, no Bluetooth, silent call, flashing 1011 error, flashing 23 error, dark screen can not be connected**, etc.; iPhone 4 battery display is abnormal, standby time is short, and it does not light up when it is lit up; iPhone white screen, blurred screen, touch screen all failure, touch screen partial failure, screen cracking, leakage; Earpiece silent, silent phone delivery, external silent, headphone jack mono, external button failure, unable to shut down, keep restarting, system crash, slow system We do the test for your machine for free. Repair now, immediately desirable, 100% use of original parts. Rapid repairWe provide more free services for maintenance customers:
1. Free fault detection 2. Free debugging and optimization 3. Free installation of common software 4. Free wifi Internet access The maintenance environment is good, which is convenient for customers to detect mobile phones; All on-site maintenance, can be the whole process**; Small problems are immediately desirable, and the charges are absolutely reasonable!
-
iPhone screen repair.
The cost of repair and replacement depends on your iPhone model and your AppleCare product warranty coverage. Apple will run diagnostic tests to determine if there is any other damage to your iPhone. If it has other damage, or if it needs other repairs, you may have to pay for an out-of-warranty repair.
The model makes tease or.
Screen repair service cost.
iPhone 6 788 CNY.
iPhone 6 Plus, iPhone 5S, iPhone 5C, iPhone 5 948 CNY All fees are in RMB and include tax. In some regions, screen repair service is available through an Apple Authorized Service Provider, but ** may vary.
Out-of-warranty repairs.
If your iPhone is not warranted but is eligible for an out-of-warranty (OOW) repair, Apple may repair your iPhone for a fee listed below**.
Models. Out-of-warranty repairs.
iPhone 6 Plus 2,388 RMB, iPhone 6 2,198 RMB.
iphone 5s、iphone 5c、
iPhone 5 1,998 RMB.
iPhone 4S 1,598 RMB.
iphone 4、iphone 3gs、
iphone 3g
-
About 800 yuan, the original new screen module.
-
Short circuit. Never turn it on again.
All mobile phones will be automatically turned off if they are flooded.
You can use a hair dryer to blow it on and then bask it in the sun for a few days to make sure it's out of moisture before turning it on. If you can't get a warranty, send it for repair!
-
No, you can re-swipe the machine. I haven't encountered it either, and it's probably something wrong with the internal hardware. Let's send it for repair. We can't help you out. iPhone global warranty, should be after-sales ***.
-
Let's go find a place to repair it, it's not a way to stand up like this, there must be a short circuit somewhere.
-
Go to the computer city to find a trustworthy maintenance staff, he will most likely tell you that the motherboard problem, you need to change the host, the cable, the home button, the speaker is estimated to be a little problematic, and it will be replaced for more than 600 pieces.
My generation is like this, water gets into it when charging. I feel distressed, and in the end I said that if I sell it, it will be 300 yuan, and the maintenance will be 700 yuan. Now I throw it at home as a door brick. It's better to buy a new one.
-
The circuit board has been boiled by water, use a hair dryer to blow the motherboard to see if it works.
-
I think your phone was damaged by water.
-
The display is broken,. Generally, 100 can be done. Fear of harming the plate.
-
Water ingress in the mobile phone will cause the components in the mobile phone to short circuit in water, resulting in UMC and other phenomena, so in this case, it is recommended to go to the after-sales service to test the situation of Yichang ruined the bird, such as the small problem of Yu Shenguo to deal with it in time.
-
It is estimated that the link line of the display was burned out,
-
If the wiring is not done, just find someone to repair the phone and get the wiring right.
It should be that the phone was jailbroken before.,You can't restore the system directly after jailbreaking.,It will be infinitely white and can't be turned on.,You need to reinstall it.,Here's how: >>>More
There is a locked version of the 3gs update can not be activated, there are several situations for you to solve. >>>More
My phone is also iphone 3gs Canadian version, I went to jailbreak after the white apple, what to do.
3.Then click on "File" on the toolbar or press alt+f4 directlyClick "Add File to Library" in the drop-down list that appears, and if you put the video directly in a folder, then directly select "Add Folder to Library". >>>More
The strongest boot speed up trick for Windows XP system.
First of all, open "System Properties" (right-click - Properties on my computer, or open "System" in the control panel, shortcut win+pause break) click the "Advanced" tab, open "Settings" in the "Startup and Failback" area, remove the two in the "System Startup" area, if it is a multi-system user, keep the "Time to display the operating system list". Click "" to make sure that the additional property of the startup item is fastdetect instead of nodetect, and do not add the noguiboot attribute first, because guiboot will be used later. >>>More