iPhone 3GS gets stuck after restoring all settings

It should be that the phone was jailbroken before.,You can't restore the system directly after jailbreaking.,It will be infinitely white and can't be turned on.,You need to reinstall it.,Here's how:

2. Turn off the phone, press and hold the home button and the shutdown button for 10 seconds at the same time, release the power button, and continue to press and hold the shutdown button until you see the device in the DFU state on the computer, after the computer prompts, release the power off button, select the recovery option button on iTunes, and click to confirm the recovery in the pop-up selection box;

3. Next, iTunes will pop up a page prompting that everything will be erased, and it will also verify and restore with Apple's server, when the verification and extraction of files are completed, iTunes will automatically reinstall the best firmware version for the phone, and reactivate the phone after waiting for the installation to be successful.

You turned out to be a jailbroken phone, right, jailbroken mobile phone can not be restored on the phone by clicking restore the original factory, now you can enter DFU mode to forcibly flash the phone, but you need to first ** the corresponding firmware.

Get to the place where the phone is sold and let them give you a swipe from it.

That's because the upgrade didn't pass.

To factory reset your iPhone, go to Settings - General > Restore, and tap Restore items as needed.

The contents of the restored project are as follows:

1. [Reset All Settings] This operation can restore the settings of the iOS device to the default state of the current system version, but will not erase personal data.

2. [Erase All Content and Settings] This operation can erase all settings and personal data, and restore the iOS device to the factory state of the current system version. To avoid data loss, we recommend that you back up your data before performing the operation. Depending on your device, it may take a few minutes to completely erase your device.

3. [Reset Network Settings] This operation restores the network settings, which will clear the password and settings of the Wi-Fi network, cellular network settings, VPN and APN settings, and the device name on the About This Machine page. It is often used to solve problems with abnormal network usage.

4. [Restore Keyboard Dictionary] This operation can restore the keyboard dictionary to the default state of the current system version. It is usually used to solve input-related problems such as text input sorting anomalies.

5. [Restore Home Screen Layout] This operation can restore the desktop icon layout to the default state of the current system version, and dissolve all application folders created on the desktop.

6. [Restore Location and Privacy] This operation can restore all native and third-party applications that have obtained all permissions. Typically used to resolve malfunctions without reinstalling the app.

2. Or go to a professional flashing store to flash the Apple phone.

3. If the Apple phone is stuck in a freeze, you can try to press and hold the power button at the top for about 5 seconds to see if the phone responds. If the crash is not severe, the phone will enter the lock screen state or restart automatically.

4. If it doesn't work when you press the power button, you can also try the second method, which is to press and hold the home button and the power button on the home screen together to force the power off of the phone. If that doesn't work, turn it off and let the phone slowly drain the remaining power and turn it off by itself. When the battery is used up, the power is cut off.

At this time, charge the phone again, and after charging to 5%, you can turn it back on.

If it can't solve your problem, it is recommended that you bring your phone to the Apple customer service center for repair, and ask questions: What should I do if the phone crashes during the factory reset process and B cannot be turned off?

Press and hold the home and power on buttons at the same time for 10 seconds, which is forced to shut down. Turn it on after turning it off, if the phone can't be used yet, you can only dfu flash the phone.

DFU Flashing Steps:

Turn on iTunes, plug in the phone and connect it to the computer, press and hold the power button and the home button at the same time for 10 seconds, then release the power button and keep holding the home button until iTunes prompts to find an iPhone in recovery mode, then release it, and click Restore to do it.

Why is the ** on the Apple phone suddenly gone?

1. Apple's built-in iCloud function is likely to cause synchronization if it is not used properly.

For example, if you're logged in to the same iCloud account on two or more devices, the accounts are likely to be synced. When you delete the deleted backup on a device, iCloud will get the deleted backup when it is automatically backed up. Then there is a good chance that other devices using this iCloud account will also be lost due to syncing**.

2. The owner's unintentional operation, such as clicking [] in the album and then mistakenly deleting all **. And you yourself don't know how or when this ** was deleted;

3. There may be a problem with the hardware of the mobile phone.

Press and hold the power button and the hom button at the same time, you can restart, if it doesn't work, please ask him to know! Check it out at the mobile phone store.

If you can use it, you can restore it once, if you can't use it, you can only flash it with dfu.

DFU entry method: Turn on iTunes, plug in the phone and connect it to the computer, press and hold the power button and the home button for 10 seconds at the same time, then release the power button, keep holding down the home button until iTunes prompts to find an iPhone in recovery mode, and then release it, click Restore to do it.

Whether it is constantly white hungry apple black screen white apple black screen.

Connect iTunes and see if you can connect your iPhone?

1 If it is connected, press and hold the shift key on the computer keyboard to restore, select the firmware version corresponding to your iPhone, and then you can flash back to the official firmware spine.

2 If you can't connect, press and hold the iPhone's power button + home button, after about 10 seconds, let go of the power button, Sakura limb mold keep holding down the home button, about 10 seconds, your iPhone will enter engineering mode, it will be detected by iTunes, prompting you to restore the firmware, then press the first step above OK

It's been half an hour.

Question: What should I do if my iPhone is stuck in factory reset?

Hello answer, if your phone is a non-jailbroken phone, then it is probably because there is too much data on your phone, continue to wait, and the progress bar will be automatically completed after the cleanup; If it is a jailbroken phone, you can't directly restore the factory settings, and the phone will be infinitely white.

If you are still stuck, you need to use the computer to operate like this:

1.Put the device into DFU mode.

Press and hold the power button and hold the home button at the same time, press and hold together for about 10 seconds, at this time only release the power button, and continue to press the home button for about 30 seconds until you enter DFE mode.

3.Open iTunes, you will see a recovery prompt, click OK, and then the software update will be carried out, waiting for the update to complete.

If the iPhone freezes and gets stuck, we can try to press and hold the power button on the top for about 5 seconds to see if the phone responds.

If the crash is not serious, the phone will enter the lock screen state at this time, or automatically restart If we press the power button and it doesn't work, we can also try the second method, that is, press and hold the home button and the power button on the home screen together to force the power off of the phone.

Reset all settings and operation methods.

Personal address book information, text messages, **, etc. are all deleted, and the use will not be affected. It is recommended that you back up this information before restoring the settings.

If you also select "Erase all content and settings" in the reset settings, this not only deletes contacts, **, text messages, etc., but also restores the settings of the network and time zone, etc. It's equivalent to a new machine.,To activate the interface to use.。

Go to your phone's "Settings" and find "Restore" in the "General" settings list

Then there will be multiple restore options in the restore list, select Reset All Settings This feature can restore all settings on your iPhone, but you won't lose data, provided you have backed up, if you want your iPhone to reset completely, you can choose the option "Erase All Content and Settings".

When the reset is completed, you will enter the activation interface, and you can use the phone after activation.

Shut down and turn on the phone according to the method said upstairs.,If you can use it, it's restored once.,If you can't use it.,You can only dfu flash the machine.。

DFU entry method: Turn on iTunes, plug the phone into the cable and connect to the computer, press and hold the power button and the home button at the same time for 10 seconds, then release the power button key, keep holding the home button until iTunes prompts to find an iPhone in recovery mode, then release it, and click Restore to do it.

There are three ways to do this.

The screen is unresponsive.

2.There is no response when the device is turned on.

When the iPhone automatically shuts down, no matter how you press the power button, there is no response, is the phone broken?

In fact, we only need to use a data cable, connect the iPhone to the computer, and it can be turned on automatically! In addition, you can press and hold the power button and the home button at the same time for a few seconds, and you may also find the logo of a white apple appearing.

3.The phone is warm.

Taking your phone out of the case will help your iPhone cool down.

Reduce the amount of time you spend playing games on your iPhone, which is the most expensive part of your phone's processor, so heat generation is inevitable.

Turning off is actually one of the main culprits that make your iPhone heat up, and it is also a major cause of battery consumption, so it's best to turn it off.

Avoid playing with your phone while charging. The heat of the mobile phone is generally emitted by the mobile phone battery and the processor, and if you play with the mobile phone while charging, it may be that the heating level of the iPhone increases.

Try to avoid using your iPhone in hot environments, such as in a sun-exposed car.

In this case, you can try to use iTunes for firmware recovery.

It could be a system error.

It is recommended to connect iTunes for recovery. The specific steps are:

Step 2: Connect your Apple 6 to your computer with a data cable.

Step 3: In the summary interface, click "Restore iPhone" and follow the iTunes instructions to restore the system version.

Apple 5s restore network settings stuck can force shutdown and restart.

Force power off: Press and hold.

home button.

power key.

10 seconds, the screen will be black and release the home button, 1 2 seconds later, the screen will appear Apple logo, still do not release the power button, only until the logo disappears.

It's an iPhone! Just press and hold the power button to force it off, and press the power button again to turn it on. If it doesn't work, press the power button + home button at the same time to enter recovery mode, connect to the computer and restore the firmware.

Press and hold the power button to force a shutdown.

The solution to the stuck iPhone is as follows:

If the system fails, restore the factory settings or reinstall the system.

If it is caused by hardware failure, go to the mobile phone store or after-sales inspection and repair.

Let your phone drain its remaining battery and wait for it to turn off.

Flashing solves.

Here are some things to try:

Solved by the power key.

Press and hold the power switch for 3 seconds.

When you press power+home, the screen goes black and you read it silently for about 10 seconds. 3. Let go of the power on-off key, keep the home keyboard for more than 10 seconds, and you can also use it for a long time, but the screen is black.

When you release all the buttons, the screen goes completely black and you will enter DFU mode. At this time, opening iTunes will prompt you to restore your phone.

Enter the recovery mode with detailed steps.

First, disconnect the data cable. Turn off your iPhone.

After shutting down, press and hold the home button to hold still, connect the data cable to the computer, and release the home button.

After the on-screen prompt, the recovery mode enters success. After connecting iTunes, you will also be prompted that you have entered recovery mode.

Exit recovery mode.

The method is very simple, press and hold the home button + power button at the same time until the white apple logo appears on the screen.