Questions about the Registered Electrical Engineer Exam

What I give you and advice is grouped down to 5 points:

1. You can apply for the professional examination only after passing the basic examination. If you have just graduated now, you just need to prepare for the basic exam, and the professional exam is at least 5 years away, so you don't need to know so many questions about the professional exam.

2. Generally, if you are not in terms of strong electricity, you can test the direction of power supply and distribution.

3. According to your major, you must work for a total of one year to meet the conditions for applying for the basic exam, you only need to apply for the exam in your local personnel network, and all the preparation materials you need will be told to you, and it is the 9th-17th exam every year. (Materials include: graduation certificate and degree certificate, ID card, work certificate of the unit).

4. The review book can be reviewed by Tianda Press's National Survey and Design Registered Electrical Engineer Public Basic Review Course, there is no need to read the textbook, and the other is to look at the real questions.

5. Review suggestions, you must spend time reading books to review, there is a lot of content, and the exam is also very basic.

You look for the information of a registered electrical engineer, search on the Internet, if I search here, it is not interesting to tell you, it is very comprehensive there.

It's useless! Don't fantasize that I will be omnipotent if I take a certificate, that will bury your future, don't be too superstitious about automation and electrical engineering, you can broaden your horizons.

The working years are counted according to the college graduation.

To participate in the professional examination of registered electrical engineers, you should pass the basic examination and meet one of the following conditions: After obtaining a doctorate degree in this specialty, he has been engaged in electrical engineering design for a total of 2 years; or after obtaining a doctorate degree in a similar major, he has been engaged in electrical engineering design for a total of 3 years. After obtaining a master's degree in this specialty, he has been engaged in electrical engineering design for 3 years; or after obtaining a master's degree in a similar major, he has been engaged in electrical engineering design for a total of 4 years.

After graduating from a double bachelor's degree or a graduate class of this major, he has been engaged in electrical engineering design for a total of 4 years; Or obtain a double bachelor's degree or graduate class in a similar major, and have been engaged in electrical engineering design for a total of 5 years. After obtaining a bachelor's degree or degree that has passed the education evaluation of the major, he has been engaged in electrical engineering design for a total of 4 years; or have been engaged in electrical engineering design for at least 5 years after obtaining a bachelor's degree or degree that has not passed the professional education evaluation; or after obtaining a bachelor's degree or degree in a similar major, he has been engaged in electrical engineering design for a total of 6 years. After obtaining a college degree in this major, he has been engaged in electrical engineering design for a total of 6 years; Or after obtaining a college degree in a similar major, he has been engaged in electrical engineering design for 7 years.

After obtaining a bachelor's degree or above in other engineering majors, he has been engaged in electrical engineering design for a total of 8 years.

All citizens of the People's Republic of China, who abide by national laws and regulations, abide by professional ethics, and have the corresponding professional education and professional practice conditions, can apply to participate in the registered electrical engineer qualification examination. Those who meet one of the following conditions can apply to take the basic exam:

1. Obtain a bachelor's degree or above in the major (referring to electrical engineering, electrical engineering automation, automation) or similar majors (referring to electronic information engineering, communication engineering, computer science and technology).

2. Obtain a college degree in this major or a similar major, and have been engaged in electrical engineering design for 1 year.

3. Obtain a bachelor's degree or above in other engineering majors, and have been engaged in electrical engineering design for a total of 1 year.

Exam Description: The examination is divided into a basic examination and a professional examination.

The basic examination is divided into professional foundation and public foundation, divided into 2 half-days, each for 4 hours, generally in the morning for the unified test paper, in the afternoon for the professional test paper (the same rate of the professional test paper of the power supply and distribution professional is more than 95%, and some questions have different focuses).

Candidates who take the basic examination or the professional examination should pass all the subjects in the current examination.

The professional examination is divided into two parts: professional knowledge and professional cases, and each Shenxiao Zen content is divided into 2 half-days, and each half-day is 3 hours.

The professional examination is divided into 2 days, the first day is the professional knowledge examination, and the results are combined in the morning and afternoon; The second day is a professional case exam, and the results are scored together in the morning and afternoon. The test will take place for 3 hours in the morning and 3 hours in the afternoon.

To put it simply, a score of 120 or more on the first day and 60 points on the second day is considered to be passed.

The professional examination for registered electrical engineers must be passed after passing the basic examination before they are eligible to apply for the major (except for those who are exempted from the basic examination).

The professional examination is divided into two days, the first day is the professional knowledge examination (upper and lower) two parts, and the second day is the professional case examination (upper and lower) two parts.

The first day is an objective question, with 70 questions in the morning and afternoon, including 40 multiple-choice questions, each with a score of 1 point, and 30 multiple-choice questions, with a score of 2 points for each question, and a full score of 200 points in the test paper;

The second day is a case question, with 25 compulsory questions in the morning and 25 compulsory questions in the afternoon (for the 25 compulsory questions that have a choice to answer, if the candidate answers more than 25 questions on the answer sheet and the test paper, the first 25 questions will be scored according to the order of the question number from small to large, and the other answers will be invalid), each question is worth 2 points, and the full score of the test paper is 100 points.

Only when the first day is more than 120 points and the second day is more than 60 points, both of which meet the standards at the same time can be regarded as passing the professional examination of registered electrical engineers.

Professional knowledge" 65%, "professional cases" 60% can generally pass, although the pass rate is low, but it will not be so low. One of the reasons why there are so few people who pass is that this exam only started in 2000, and there are not many people who prepare (the base is small); Then there are those who are qualified to take the exam, and it has been at least five or six years since they graduated from college, and they can't sink their hearts to say that it takes a lot of effort to pick up this knowledge; There is also a time when the qualification examination is old enough, people's memory has declined a lot, and it can be seen in the professional examination that understanding is a part, but a larger part needs to be memorized, so the people who decide to take the exam for various reasons are not in the majority.

This subject is quite uncomfortable, you have to be mentally prepared

Over and over

Online registration, on-site confirmation, online payment.

For on-site confirmation, you should bring (1) the original and 1 copy of the candidate's valid identity certificate; (2) The "Qualification Examination Registration Form" and the "Letter of Integrity Commitment" stamped by the unit; (3) The original and 1 copy of the academic (degree) certificate; (4) The original and 1 copy of the professional and technical qualification certificate.

The basic examination can be directly taken after graduating from the bachelor's degree, and the junior college must have work experience; After the foundation, you can take the professional exam according to your different majors and meet different working years.

I only took the basics, all of which were multiple-choice questions, 120 in the morning and 60 in the afternoon, with a full score of 120 each, and a total score of 132.

Let me concisely summarize your question:

1.You can take the basic test, and the applicant can pass your own unit or your friend's unit, so it doesn't matter.

2.It doesn't matter if you have design experience for the basic exam, the foundation is all taken by the public, and it is mainly a public course. Of course, the major is not the same, and the experience is very related, the exam and a lot of design specifications, so, you have to think about the professional you have to study the norms, this professional exam is not your school to learn electrical things, is related to a set of design ideas, methods, specifications, experience and other exams, so it is rare or relatively large, but the key is to see how you have prepared this year after you have taken the foundation?

Didn't you prepare for the exam with your heart.

3.If the power supply bureau is concerned, it depends on whether your unit will give money or not, and you have to ask your unit about manpower, but the design institute wants this, and the design institute has this basic electrical aspect without any exams. At the same time, before the design institute has this certificate, some units have more money, and some units have very little, the key is to see whether the demand for registration of this unit is large, and the supply will not exceed demand.

Of course, it will definitely be of great help to your future development, and the leaders of the design institute are basically registered certificates.

It's also very frizzy, and if you have any questions, you can also consult the registered electrical engineer group that you know, and there are many masters in it.

At a glance, the recruitment of ** members of the talent network design talent network, the professional team sincerely serves you!

This is very simple, the basic exam, just graduated can be examined, the professional examination has to wait until you say to obtain the professional college degree, a total of 6 years of work in electrical engineering design, or after obtaining a similar professional college degree, a total of 7 years of electrical professional engineering design work can be examined, if you want to take the test, the design institute is not able to give you a certificate, can only be you a member of their design institute internal staff to sign up, in fact, to put it bluntly, it is fraud, However, there are too many frauds and no one has verified them, you don't have to worry about or go to jail or something, this is not a special unit or individual to do this, this is the design institute to evaluate the qualification, the qualification is used, some construction companies and development companies are also used, and there are some other companies to use, but this certificate can only be tested from the design institute, so many of them are nominated, working in other units, signing up in the name of the design institute, and registering in other companies after the exam, So see you, if you want to take the exam, just find a familiar design institute and find an acquaintance to register for the exam, the basic exam review is very simple, that is, your undergraduate graduation certificate (this major) plus the procedures of the design institute on the line, the same is true for the professional, the registration is very simple, but the exam is difficult to pass. I hope it helps, and don't forget to give me extra points. This is my first question, if there is anything unclear that can be asked to me, it just so happens that I also have to rely on this, I have taken the test several times, but I have not taken the test.

It's okay to communicate together. Ha ha.

Yes, you go to the electrical and say take a look.

Your major can only be applied for the housing construction major.

There are academic requirements, and you need to upgrade your academic qualifications to a bachelor's degree first.