XP system computer is poisoned, can t be turned on, reboot indefinitely! Find out how to reinstall t

Brand machine or assembly machine, if there is no quick start key, boot press the del key to enter the BIOS interface Find boot ·· Modify the boot startup item·· Select Disc to boot·· Enter the disc installation interface·· It's ready to install...

Conflicting or running out of memory!

Format the C drive and reinstall it!

No, just: format it all and reinstall it!

No more, send it for repair, there is a problem with the hardware!

Win7 to XP first of all, the system grid is on the line. You format it first, and then install it and try it. If it doesn't work, it may be a problem with your system.

The installation system must first set up the light qi, and the steps are such as the shirt to keep an eye on:

1.Start the computer and hold down the DEL key until the BIOS settings window appears (usually blue background with yellow English text).

2.Select and proceed to the second item, "BIOS."

Setup. Find the item or group that contains the word boot, and find the three items in order: "first", "secend", and "third", which represent "first start", "second startup", and "third startup" respectively. Here we can set it to "optical drive", "floppy drive" and "hard disk" in order.

If you don't see these three e-texts on this page, usually the option menu on the right side of boot is "setup", then press enter to see) should select "first" and hit enter, and select cd-rom in the submenu that comes out. Press enter again.

3.After selecting the startup mode, press the F10 key, the E text dialog box appears, press the "Y" key (can be omitted), and press Enter, the computer will automatically restart, proving that the changed settings have taken effect.

Set up boot from disc.

Disc mounting. Step-by-step instructions on how to reload XP lineages and systems.

The above is almost wrong,Dell's computers are pressed F12,Then choose CD or the English option at the beginning of *** to start from the optical drive,This is the easiest way to start from the optical drive,Complex press F2 to set up the sail。 You slowly put the mold disk of the Guangling Hall into the optical drive, then restart the computer, press F12 to select the optical drive to start and start from the optical disk.

The main thing is to confirm whether it is a disc boot, simply put, the order of boot reading is the disc first and then the hard disk, and look for the "boot sequence" in the BIOS (it seems to be spelled like this......Set the first device you read to a cd-rom and give it a try

Enter the computer BIOS to change to optical drive boot, and restart the computer after putting it in the system disk!!

To enter the blos system is to press the del key to enter from the moment you turn on the machine, and then find the CD in the blos item with the letters all the way! Finally, enter and change the inside to CD and save it again! It will automatically enter the installation system!

Choose to install the system to the C drive and wait! Isn't that simple?

Press delete when starting

Once you enter the interface, find the one that has the BIOS option.

Find an item with a fist or something, which means the first boot item, change it to cdrom boot and you're good to go.

1.The easiest way is to throw the disk into the optical drive, restart the computer, press the F12 key, and select Start from **, here select Start from the optical drive.

2.Then restart the computer, press the del key to enter the BIOS, select the optical drive in the first in the boot, that is, the first boot is the optical drive.

3.If your computer can barely enter the system, you can first test the system in the disc to the hard disk under the system, install a one-click restore or maxdos 8 restart the computer to restore the system that is admitted to your hard disk, the same as the disk installation.

Then there is a problem q me, 345101236

Just set it to a disc to boot up, you can take a look at this.

Friends,Hello,Generally, the win7 system is installed first,To change to xp3,Which should be handled according to the following method,You can successfully complete the installation:

You only need to go to the computer city to buy a ghost version of xp3, (generally such a disk is 5---8 yuan a piece).

The first step, you set the optical drive as a startup item, enter the ghost version of the disc, use a software in this disc diskgenius, enter this software, delete your previous partitions, start from the logical partition, delete one by one, and then delete the main partition, and then re-partition, generally divided into four to five areas, C disk you can set 20G is enough, the other areas you distribute equally, and each disk is formatted, and set up the active partition, restart the computer to divide it, why do you do this, This can be 100% guaranteed that the subsequent installation of the system is successful,If you don't do this,Sometimes you have installed win7 before,Now you can't install the system with winxp3。

The second step,You turn on the computer again,Enter the disc,As long as you click A,It will automatically install the disc,To 100%,Automatically restart the computer,Install the system,After entering the system,The ghost version of the CD,It will also automatically install the driver,After installing the software,If you want to ensure that the system is more stable,It's best to use the disc of the motherboard,Load it again,So that the system is more compatible,This is the whole process of installing XP3 with the ghost version of the CD,Of course, there is also a one-click restore method,And U disk method, In the future, I will slowly tell you, I hope it can help you, I wish you success and happiness

Find a tool disk with a boot and use the Disk Utility grid C in it

Once the system is installed, the system will automatically load to the startup page.

If you can't jump to the boot page, it may be the boss's motherboard, and you need to manually set the boot item to a hard disk

If none of the above methods are available, it is a problem with the system disk itself, and it is recommended to replace the system disc with another version.

Go to the BIOS and change the optical drive boot to hard disk boot.

The easiest way is to take out the disc after installation, and the computer will automatically detect and start it.

The system cavity is not installed properly. Just reinstall the system with a system disk that has been verified and buried, so that the system installation failure and restart can be solved automatically and smoothly throughout the process. These are possible with a USB flash drive or hard disk, and the installation speed is very fast.

But the key is: to have good compatibility (compatible with IDE, ACHI, RAID mode installation) and can be automatically and permanently activated, can automatically install the machine hardware driver sequence of the system disk, which can be the whole process of automatic and smooth reinstallation of the system. Here's how:

1. U disk installation: ** A verified system installation disk file (ISO file), use ultraiso software to make a boot U disk to install the system, and use this good system U disk to guide the start machine, you can install the system smoothly;

exe" to the non-system partition of the computer, and then run "Install the system." exe", directly press enter to confirm the restore operation, and confirm the automatic installation operation again. (Pay attention to back up the important data of the C drive before execution!)

3. **version tutorial: How to give you the detailed **version installation tutorial in this regard? Can't be attached. will be judged by the system as a violation. The address is in the upper right corner of .........the "Know Page".si xin zhong………Yes! Hope!