Can PSP3000 write by hand? The inner circle behind me is thin. That s 3,000?

If you're sure it's a PSP and the loop on the back is thin, then it's 3000, but 3000 doesn't support handwriting, because it's not a touch screen, and it's a PSV, and it's a next-generation handheld with PSV, and the back can also be touched, and there is a detailed description of PSV on the game bus

PSP from the first generation of 1000 to 3000 to PSP GO without touch screen,PSP3000The circle behind the PSP3000 is thin,The back can be opened,You can put it into the PSP special game or movie carrier UND disk,Generally, the circle behind the mountain race goods is just decoration,The back can not be opened,To play pirated games, you must use Sony's memory stick,Find more information on the Internet,Compare and contrast,Mountain race goods are still easy to recognize。

Hello,PSP3000 does not support handwriting,The main thing to distinguish between PSP3000 and 2000 is to see if there is a hole at the bottom of PSP,It's a microphone hole,It can be handwritten is a copycat MP5

If the inner circle behind is thin, it is PSP3000,The difference between 3000 and 2000 is here,Are you sure yours is Sony's PSP? Sony's handheld current PSV is touchscreen, and it is a dual touch screen.

The PSP3000 has always been a keystroke, and if you talk about handwriting, it's PSV, and only PSV can be handwritten, and in the handheld (FC), only PSV is handwritten.

It's not 3000, 3000 doesn't support touch screen, you're a copycat?

Let's talk about it first, the state cavity is the original round track, and the PSP behind it is not a steel rim, but a plastic, which can be said to be Sony's cavity shirt in the pit book, and LZ's can be torn off, which must be a sticker added by the shopkeeper in order to hide the scratches, and the refurbished machine is certain.

Tear it off, and the psp rim will come down? Then there's a problem.

Hello, PSP group for you.

That button is used to adjust the brightness of the screen, and the brightness of the homebrew system has four levels.

The brightness of the screen.

The 2000 non-v3 has three tiers.

The 3000 and 2000 v3 have two layers.

In fact, it is wrong not to change the opening seal, it is an untenable reason, but for the black spots on the screen, this is called a bad point, the factory generally has a limit, the standard is different, the number of restrictions is also different, a bad pixel is mostly not replaced, unless the merchant guarantees that there is no bad pixel commitment. But it's a problem to brush the machine too slowly, according to what you said, it's too slow, and it doesn't matter much about scratches, and most of them can't be replaced for this reason. It is difficult to distinguish between these responsibilities.

That's not a bad point.,The landlord said it's too vague.,I can't see the specific situation and can't say.,But it seems that the 2000 and 3000 screens are the same.,It is recommended that you go to the physical store and let the merchant help you get it.。

Now you can buy a game console and consider PSP directly, because it will take a long time for PSV to crack (unless you want to spend a lot of money to buy genuine games), PSP platform is supported by world-class manufacturers, such as Square Enix, which has a large number of famous works such as Final Fantasy and Parasitic Eve, even if you turn to PSV and PS3 platforms in the future, the previous games are enough for you to play.

Now the perfect crack of the machine hole is 2000,But you don't have to think about it if you can't buy it.,The perfect crack system has.,But compared to .The 60 system is still relatively poor (generally chosen, and it can also run games with a size of more than 2G).

In fact, if the landlord has not played PSP before, you can buy a PSP GO, the new machine **900 or so and 3000 is about the same, but it comes with a 16G memory card (save more than 200 - - Some people on the Internet say that the feel of GO is not good, but I don't think it's ......Generally speaking, people who are used to playing 1 2 3000 will say this. And the small size of the go is a great advantage, it is very convenient to go out in the pocket, 3000 is really big. It's best to buy a new machine in a physical store, and there may be refurbished machines available online (unless you want to buy a second-hand one).

In addition, a bag (or rubber shell) + a headphone cable is about 1,000 yuan for a car rental (plus 300 for 3000 models).

Part of the answer came from his own hand before, and the landlord didn't mind.

If you flash the machine,It's really very simple,My steps are like this:Open PSP (nonsense),Enter**,Click into the **group** of the flashing machine,If it is not successful,It will crash,Then start again。 If it succeeds, it will be slammed and then run the homebrew system.

That's it. In addition, if you play often, it is recommended to sleep, and it doesn't use much power than shutting down, and it saves flashing.

Now install the latest system, run it directly and enter the autonomous system, no longer need to use complicated flashing.

There are a lot of tutorials on the Internet.,If you can still recommend it to the video game store to flash the machine.,In most cases, it's free.,You can bring your own small-capacity memory card.,32's on it.。

You're a 3000 machine! If you shut it down, you have to start anew! If it's shut down, it's the official system, including the feast! Pressing r to build doesn't work! Press Select to build in the XMB interface when rebooting! There are options inside and you should be able to enter recovery mode!

Shutdown press r is just for 1000 machines and 2000 v2 motherboards! The principle of v3 motherboard cracking is the same as that of 3000! Shutdown is a no-no! As long as the computer is turned off, you have to start from scratch!

I remember that the registry-button assign option is not the option of 3000 machine for European version of the machine,A selection will turn off,My home is the Sakura pure grinding European version of the machine,I remember that there is an option in a submenu to change the spine,The pants will also show which button you are currently OK with。

If you find the problem early, it's best to get the merchant's finger Li to change it as soon as possible, there are generally a few days of hunger and spring when only the limbs are delayed, and it must have just been bought, and I can't use it to have a pimple in my heart, right?

All of the above operations are critical to the last step, and it is OK to press shutdown to save.

This cavity is a low version of the system when bought, a kind of software that the user installs to upgrade the system, and the specific experience is, the preliminary judgment that you buy the object is a refurbished machine to renovate the Wu Mo Hall machine.

1709309 number, the number in the battery compartment, the number on the box; The number on the battery, the *** on the battery, if you are consistent, it proves that they are all together. But this does not prove that it is not necessarily refurbished.

This can not be used as a basis for whether it is a refurbished machine, and the refurbished machine needs to be disassembled!