Ask for help from all the masters!! How do I install the system if I forgot to restore the card? 30

First: Install the virtual machine software.

The two best virtual machine software available today are MS Virtual PC 2004 and VMware. The premise is that your machine configuration is a little higher, otherwise the speed of running the game with this virtual system will be unbearable. In addition, since the virtual machine is a virtual operating system, the equipment in the virtual machine is different from your actual device, in order to ensure the compatibility and stability of the system, the virtual machine virtualizes the existing equipment into the most standard and best compatible equipment.

But even so, for many DOS games you still have to do some system configuration to make the game work. If you're not familiar with this area, installing a virtual machine won't solve your problem.

Second: Install multiple operating systems.

This is essentially the same as in the first case, except that instead of being virtual, multiple operating systems are actually installed on your hard drive. This is another problem, if you are on a new machine, format the hard disk partition and then install it, the operation is simple, you just need to install it in order from low to high (DOS, Win9X, WinXP).

For most people, WinXP has been used for a long time, and then they want to play DOS games, and then it will take some trouble to install DOS or Win9X. It's easier to do for win9x, and you can find many ways to do it by searching on google. And for those who want to install pure DOS under the XP system, if your main partition is in FAT format, it is easy to do, to the new DOS**** a full installation version, install it directly, it will automatically configure the multi-boot menu, but if the main partition is NTFS, the operation will be more complicated.

It is necessary to use spfdisk, system commander 2000 and other multi-operating system boot management tools, which is dangerous and not recommended for general users.

Similarly, even if you run a DOS game on a computer with multiple systems, there are still many games that need to be manually configured by the user, and if you don't have the knowledge to do so, you still won't be able to solve your problem.

Third: Use the DOS boot disk.

The new DOS** has launched a super boot disk (very powerful and comprehensive), which can be used to boot the system to lead the system to DOS. However, it will be difficult to configure the game under the pure DOS system, so the difficulty of doing the same in this boot disk boot system can be imagined! This super boot disk is mainly used for other purposes, and it is not ideal for running games.

The first three situations require you to have certain knowledge of memory configuration, hardware drivers and other related aspects (DOS) for friends who want to play DOS games, and it is also more troublesome to use. Popular Software Magazine has introduced a software that runs DOS games under XP, VDMSOUND, which can be said to be a simple and easy-to-use software. Now he has launched a new version.

The easiest way is to find a ghostxp boot disc. After the disc is launched, there is generally a DOS toolbox such as the Deep Mountain Red Leaves DOS or the Dwarf DOS, and after selecting this toolbox to enter the DOS. There is generally this tool, crdisk.

You can directly type crdisk in the dos command and press enter to clear the protection card information.

It's been a long time since I've used a small sentry. If you forget the password, you can unplug the little sentinel, and you can install the system, but you can't use the small sentinel anymore after installation, otherwise it will go wrong, and the living system will be restored to the original.

After installing the system, you can use one-click ghost to back up the system. Personal computers, with a restore card, are not very necessary.

Hehe! It's useless. You must uninstall the restore card in the DoS or Restore Card settings interface, and then install the system.

If the restore card is removed at boot, you can only unplug the restore card and reinsert it, or change the slot. You have to try a few more times, sometimes the motherboard will not find the restore card, so you have to try a few more times.

Eldest brother! What kind of recovery card are you! Is it a small sentinel's? Restore card by many kinds! It is recommended that you go online to check how to use your reset card!

Use the restore card settings interface to uninstall the restore card, if you have a password, it will be troublesome. Restored the biso and put the hard disk in full storage.

If you don't know the password of the restore card, unplug the restore card first, format the hard disk at a low level, and then partition it, and then install the system.

If you know the password, uninstall the restore card and then install the system.

It is possible to remove the reset card setting for low-level formatted hard drives. The premise is to unplug the restore card first.

Uninstall the restore card properly and wait until the system installation is complete. Direct dialing of the card or direct installation of the system, resulting in the restore card not being properly uninstalled and causing the system to work abnormally.

Either remove the restore card.

Do you want to hack the restore card in the installation.

When turning on the computer, press and hold Ctrl+Home at the same time, so that you have entered the password input window of the restore card, enter your password, there is an item to remove the reset card, the computer will automatically shut down, open the chassis and unplug the restore card, and you can do the system.

Hard Restore Card: Open the case to accompany the hand, there is a special hardware, remove it.

Soft reduction card: There are many kinds of fierce hands, and the methods are different:

1.Guan Lu knows that the tool is uninstalled.

2.Run the uninstaller (ask for a password).

If you can't uninstall it, please access the hard disk directly (of course, you have to write a program).

The configuration of the school machine is very poor, and the restore card is actually just a restoration program.

Change the system to install, if it doesn't work, press Delete, and Bois changes the interface to install.

Format the C drive with PE and reinstall the system.

Put the image on the USB flash drive, and then set the boot auto item to the USB flash drive to start.