I can t get into the system, so I ask the master for help!!

1: Personally, I think that this kind of problem may be a virus or plug-in problem, you can try to boot into the safe mode to see, if the safe mode can be entered. Then use 360 Security Guard to process and take out the plug-in.

There may be malicious plugins. Then use anti-virus software to kill the poison. Then restart it to see if you can enter the system.

2: The safe mode cannot be entered, it is recommended to reinstall the system. It is possible to lay down the ** of specialized maintenance personnel.

The general system is reinstalled, 30 yuan for desktops, and 50 for hand-held. If you send it to a repair shop, you may be able to return it a little**, 20-40 is probably fine. ps：

Remember to tell the maintenance staff which documents are important to you and need to be saved. So as not to say that important files are lost after reinstallation. It is also possible to recover lost files, but data recovery is generally charged depending on the difficulty of recovery and file size.

1,Is your game installed in win7? If yes, uninstall the game in win7 and reinstall it.

2,If not,Open the file installed in XP in Win7 will be like this,Go to XP to uninstall this game,Then install it in Win7。

If you lose any system files or are infected by a virus, reinstalling your system will be solved quickly!

1.Unplug the power cord behind the main unit, press the power button a few times, and then plug the power cord back in again to try to turn on the power normally;

2.If it still can't be turned on, switch the power cord between the monitor and the host to rule out the cause of the line;

3.If the wiring is also normal, you need to open the chassis, remove the battery on the motherboard, turn it over and install it, clean the CMOS, and install the battery back normally after a while;

4.Or reseat the memory, discrete graphics card, and other components on the motherboard a few times, and then try to boot it on;

4.If none of the above methods are effective, you can check whether the power supply can be powered on in a closed-circuit environment separately to determine which link the problem is, but this step requires a certain amount of hardware maintenance experience, and it is recommended to ask maintenance personnel to operate.

See if there are any loose parts in the case, if not, it is a hardware problem, now I suspect that there is a problem with the memory, take the memory of someone else's computer to your computer to try, and the motherboard may also be broken.

Look at the network card behind the host, the light is on, is the host power cord loose? Disassemble the case and see if the motherboard light is on? Try changing the power cord.

It's a power supply problem.,It should be you play with the computer all day.,Don't shut down,(Same as me...) Now that the power supply is burning, let's change it.

I haven't played in over a month. 555555555555555555 is the light on your computer not lit on the host, just like there is no power, the lights of the monitor and stereo are on, the mouse is on, the keyboard is also on, and the screen is black.

If that's the case, there's something wrong with the power supply.

You use Rising for nerves, I have a unit here, that is, I use a genuine Rising Rising, and the whole world was killed once one day, and all of them were paralyzed, and the guy in the information center was deducted a year's bonus. It's crazy, and there are still people who return Rising.

Enter PE and format the CD disk. Then reinstall it. Poor yes.

In these years, there are still people who dare to use the Rising ............ obediently

Before installing the computer system, format the C drive, and then start to install the system completely, or directly use the cloned system to solve the problem.

360 is a hooligan, don't you know? Use Jinshan, it's much better than 360.

Solution].

1 The memory module is broken Replace the memory module.

2 Dual memory is not compatible Use the same brand of memory or only one memory 3 Memory quality problems Replace the memory module.

4 Heat Dissipation Enhancement of heat dissipation inside the case.

5 The memory and motherboard are not plugged in or other hardware is incompatible Reinsert the memory or change the slot6 There is a problem with the hardware Replace the hard disk.

7 Driver Problems Re-answer the wide installation driver, if it is a new system, you should install the motherboard driver first8 Software is corrupted Reinstall the software.

9 Software bugs patched or updated to the latest version.

10 The software and the system are not compatible Patch the software or try the compatibility mode of the system11 There is a conflict between the software and the software If you have recently installed any new software, uninstall it and try it12 There is a problem with the software to use other related software Reinstall the related software, such as **An error occurred when a file of a certain format, it may be that there is a problem with the decoder of this file.

13 Virus Problems Antivirus.

14 Antivirus software conflicts with the system or software Since the antivirus software enters the underlying monitoring system, it may conflict with some software, so try uninstalling it.

15 There is a problem with the system itself Sometimes the operating system itself will also have bugs, pay attention to install the official release of the update, such as the SP patch, it is best to put it. If that doesn't work, reinstall the system, or replace it with a different version of the system.

1. Too much dust, poor contact, and loose internal components of the machine, resulting in a crash. Dust removal, plug all connections tightly, and plug them in firmly. Use an eraser to wipe the gold finger of memory, network card, graphics card, and sound card, clean the slot, reinsert it firmly, or change the slot.

2. Check the memory, plug the memory tightly, remove the unstable memory, and increase the memory.

3. Set the BIOS as default.

4. Change the optical drive and install it again.

5. It may be a hard disk problem.

1) Hang this disk to another computer to do slave disk, scan and repair C disk. My Computer—Right-click on the disk drive you want to install the system on (C)—Properties—Tools--Check and start checking—Check "Automatically fix file system errors" and "Scan and try to recover bad sectors"—OK--Start-Restart, check and repair and then install it. At the same time, other partitions are also scanned and repaired.

2) Save the files in the C drive to another partition or another hard disk, and format the C with the format command. Start-Program-Attachment-Command Prompt Symbol or Start--Run-Enter "cmd"-OK, in the window that opens, type "format x: (X is the drive letter of C in the original disk hanging on this machine, there is a space in front of X), press the Enter key, the option of "Y N" appears, press "Y", you can format the C area of the hard disk.

3) If there is a hidden partition, delete it.

4) Repartition the hard drive if necessary.

5) Not yet, maybe there is something wrong with the hard drive, repair the hard drive.

6. Check if there is a problem with the motherboard.

In my experience... I can't pass it in the scrollbar. You change the memory.。。 Memory. I still can't change the power supply. It is usually a memory problem、、、

Aren't you trying to repair your computer with something new?

Like we all use USB flash drive now.。。

Can you enter the PE system if you don't connect the hard disk?

If you can't get in, change the memory. or power supply.

Is it a blue screen after installing the driver. Just copy a file and get a blue screen?

Memory is the most suspicious.

The eighteenth-level big brother said it very well.,I'll talk about the key.,Your antique hard disk is not SATA's.,So the ghostXP SP3 disk with integrated SATA driver installed will of course be blue into the system.,Try to boot into the BIOS to set the IDE type.。

See if the CPU fan is broken.

The safe mode can be entered, but the normal system can not, which is a problem with the graphics card driver. Try a computer with the same graphics card as yours. It could also be that the hard drive has bad sectors. Aging of parts.

The setting was started with a USB flash drive.

Press del to enter the BIOS settings.

Reworking the system is the smartest option.

Press F1 to try. No repairs are required.