Horsepower. and CC. What is the exhaust volume? What s the matter, who can help me explain.

Let's start with displacement: Explain a few terms: Top dead center:

It is the highest point of the upper plane of the piston in the cylinder. Bottom dead center: This is the lowest point of the upper plane of the piston in the cylinder.

Cylinder working volume: that is, the volume between top dead center and bottom dead center. Combustion chamber volume:

It is the volume formed by the corresponding recess space on the top of the piston and the cylinder head. Total cylinder working volume: that is, the sum of the cylinder working volume and the combustion chamber volume, usually in "liters".

The sum of the working volumes of all cylinders on an engine is the total displacement (i.e., displacement) of the engine. At present, the unit of displacement is mainly "liter" (l), in addition to "milliliters".

ml, 1 liter = 1000 ml), milliliters can also be expressed as "cc". For example, the displacement is liters, which can be expressed as or 1800ml, 1800cc) 2Let's talk about horsepower.

Horsepower is a unit of measured power.

Another commonly used one is kilowatts, the conversion between horsepower and kilowatts is 1 metric horsepower = kilowatts, 1 imperial horsepower = kilowatts Generally speaking, the displacement of a car.

The bigger it is, the more horsepower and torque it will output, and the better the performance of the car, but the higher the corresponding fuel consumption! 3.For the same car, if the power and torque output are the same, then the four-wheel drive model is generally slightly slower than the two-wheel drive in acceleration, and the top speed is also slightly slower (except for those that are originally high-power models), because the performance of the car is not only the power and torque parameters, but also the body weight, drag coefficient, and transmission.

There is a direct relationship between friction, resistance, and so on. The four-wheel drive system is more complex than the two-wheel drive one, so the four-wheel drive version is heavier than the two-wheel drive version, and the fuel consumption of the 4-wheel drive version is higher than that of the 2-wheel drive! 4.

As mentioned above, the weight of the car will affect the performance of the car, and the same 300 horsepower, the heavier weight is generally slightly slower than the lighter one. But it also depends on other aspects, such as drag coefficient, transmission system, friction resistance, etc.

Hello, horsepower refers to the power of the engine, only horsepower, cc is the unit of volume, the displacement refers to the volume of the engine's suction exhaust, the larger the displacement, the more power is often sufficient, the unit of displacement can be L or cc

cc is the exhaust volume, the larger the exhaust volume, the more horsepower!

The jade curtain can't be rolled up, and the clothes are smashed and the anvil is returned.

At this time, we don't hear each other, and we are willing to shine on you month by month.

The wild goose flies for a long time, and the fish and dragon dive into the water.

Last night, the dream of the idle pool fell, and the poor spring did not return home.

The river flows to the end of spring, and the moon falls in the river and the lake slopes westward.

The oblique moon sinks into the sea fog, and the stone Xiaoxiang has an infinite road.

I don't know how many people will return to the moon, and the falling moon will shake the river trees.

Displacement is the total cylinder volume cc is a unit of volume, which is cubic centimeters, that is, milliliters, car displacement is the engine signage of the car, and every car has it. The displacement can be measured in cc (milliliters), but of course it can also be used in l (liters).But generally with milliliters.

Definition of displacement: Engine cylinder volume multiplied by engine cylinders equals displacement volume. Engine cylinder volume is the space that is given up by the piston from top dead center to bottom dead center when the engine piston is in reciprocating motion.

Top dead center: the highest point to which the piston moves, and bottom dead center: The lowest point to which the piston moves.

Refers to a displacement equal to approximately two liters. (The displacement is generally not an integer, for example, the displacement of the corolla is liters or 1998 ml).

cc=cubic centimeter means cubic millimeter.

Displacement is the total cylinder volume. cc is a unit of volume, which is cubic millimeter, which is the milliliter.

The displacement of the car is: the volume swept by the piston in the cylinder from the top dead center to the bottom dead center, which is called the cylinder working volume or cylinder displacement. The sum of the working volume of each cylinder of a multi-cylinder engine is called the engine working volume or engine displacement.

cc is the milliliter. 1000cc displacement is also 1000cc. One liter means.

ml.=milliliter means milliliter and is a unit of volume. 8000cc.

with 8000mlIt is numerically equivalent, i.e. 8000ccEquivalent to 8000ml

but the meaning is very different. cc.Volume units can be used as units of measurement for solids, liquids, and gases; ml.

The volume unit can be used as a unit of measurement for liquids and gases (one of the important analytical indicators of the ADC--- gas generation is expressed as: ML gas GADC).

cc.=cubic

centimeter

It means cubic centimeter, which is a unit of volume;

cc.Volume units can be used as units of measurement for solids, liquids, and gases;

This refers to the displacement of the car.

Hello, CC should refer to the Volkswagen CC model, if my answer is helpful to you, please set it to.

cc is a unit of volume, which is cubic millimeters, that is, milliliters, and refers to the exhaust volume of the car. The displacement of the car is: the volume swept by the piston in the cylinder from the top dead center to the bottom dead center, called the cylinder working volume or cylinder displacement, and the sum of the working volume of each cylinder of the multi-cylinder engine, called the engine working volume or engine displacement.

1. Displacement, a special term for hydraulic transmission, refers to the volume of fluid sucked in or discharged per stroke and cycle. The division of car classes in China is determined according to the size of the displacement.

2. The displacement of the minicar is less than or equal to; The displacement of the ordinary class sedan is within the range; The displacement of the mid-class sedan is within the range; The displacement of mid-to-high-end sedans is within the range; The displacement of a luxury sedan is larger.

Engine displacement is the sum of the working volume of each cylinder, which is generally expressed in milliliters (cc). The working volume of the cylinder refers to the volume of gas swept by the piston from the top dead center to the bottom dead center, also known as the single-cylinder displacement. The larger the displacement, the more power there is, and the greater the relative fuel consumption.

cc is the milliliter, which is the displacement of the car, which is the same as the number of displacements of the car.

Gas volume copy

or displacement, which refers to the inhalation of an internal combustion engine in a full BAI engine cycle.

The total volume of air and gas mixtures is usually measured in cubic centimeters (cc) or liters (l). Engine displacement is not the full volume of the engine's combustion chamber. In many countries, motor vehicles with internal combustion engines are taxed primarily on the basis of their exhaust emissions.

For example, if the cylinder bore is 10 cm, the stroke distance is 5 cm, and the engine is a four-cylinder engine, the calculation is as follows:

102 * 5 * 4 = 1570 cm3 ≈ liters

The larger the exhaust volume, the faster it seems to be... The average motorcycle at home is about 48cc... Cars are going to be a lot.

The meaning of milliliter is usually 1600cc when it is said for cars.

The engine of this displacement should be used on motorcycles, but it should not be able to pull when used on cars.

cc.=cubic centimeter means cubic centimeter, which is a unit of volume;

ml.=milliliter means milliliter and is a unit of volume.

8000cc.with 8000mlIt is numerically equal, i.e. 8000ccEquivalent to 8000mlbut the meaning is very different.

cc.Volume units can be used as units of measurement for solids, liquids, and gases;

ml.The volume unit can be used as a unit of measurement for liquids and gases (one of the important analytical indicators of the ADC--- gas generation is expressed as: ML gas GADC).

Both 500cc and 50cc are unlikely to be cars.

cubic centimeter The abbreviation of cubic centimeter is cc, which is mostly used to represent the displacement of the car, and cubic centimeter is also called milliliter.

That's why "1000cc is equal to 1 liter".

Depressed, I haven't explained it clearly after looking for so long!

Displacement is the total cylinder volume cc is a unit of volume, which is cubic centimeters, which is milliliters.

cc=cubic centimeter means cubic millimeter. Displacement is the total cylinder volume. cc is a unit of volume, which is cubic millimeter, which is the milliliter.

The displacement copy of the car is: the volume swept by the piston in the cylinder from the upper dead center to the bottom dead center, which is called the cylinder working volume or cylinder displacement. The sum of the working volume of each cylinder of a multi-cylinder engine is called the engine working volume or engine displacement.

The volume of space through which the piston moves from top dead center to bottom dead center is called cylinder displacement; If the engine has several cylinders, the sum of the working volumes of all cylinders is called the engine displacement. It is generally expressed in liters (L). Engine displacement is one of the most important structural parameters, it is more representative of the size of the engine than the bore and the number of cylinders, and many indicators of the engine are closely related to the displacement volume.

Usually the displacement is large, and the energy released by the engine per unit time (that is, the chemical energy of the fuel is converted into mechanical energy) is large, that is, the "power" is good, just like a teenager boy is of course more efficient than a healthy adult. So those off-road vehicles and sports cars usually have a relatively large displacement. (Photo by photo:.)

Chen Jie2) M5 Trumpchi GS8 AION v Macchiato DHT PHEV Latte DHT Hiphi X @2019

Gas volume or displacement refers to the total volume of air and gas mixtures inhaled by an internal combustion engine in a complete engine cycle, usually measured in cubic centimeters (cc) or liters (l). Engine displacement is not the full volume of the engine's combustion chamber. In many countries, motor vehicles with adjudicable internal combustion engines are taxed primarily on the basis of their emissions.

For example, if the cylinder bore is 10 cm, the engine stroke distance is 5 cm, and the engine is a four-cylinder engine, the calculation formula is as follows:

5*4=1570cm3 ≈

In addition to Lifan's 600cc, Jialing Group's also made its debut. Jing Bo, president of Jialing Group, said that this 600cc motorcycle has created several firsts in the same industry in China: first, it is the fastest, generally the maximum speed of 125cc displacement is 95 kilometers per hour, 250cc reaches 120 kilometers, and the maximum speed of this yooyo600cc reaches 170 kilometers per hour; The second is the highest, the market for this 600cc motorcycle has not yet been finalized, but Jialing market insiders estimate that it will be about 30,000 yuan; Third, the latest technology, the emissions of this 600cc motorcycle have reached the European standard in advance, and it is the most environmentally friendly domestic motorcycle at present.

Displacement: The volume of space through which the piston moves from top dead center to bottom dead center is called cylinder displacement, if the engine has several cylinders, the sum of the working volumes of all cylinders is called engine displacement.

The total displacement of a sedan engine can be used as a marker to distinguish the sedan class. The total engine displacement refers to the sum of the working volume of all cylinders of the engine, and the unit is liters. China's car classification is based on the total engine displacement.

The minimum rank is less than or equal to.

l liters, belonging to the mini car piechai.

The displacement is greater than. l liter and less than or equal to liter, belongs to ordinary class cars.

If the displacement is greater than liters and less than or equal to liters, it belongs to the intermediate car.

If the displacement is greater than liters and less than or equal to 4 liters, it belongs to the middle and high-end cars.

With a displacement of more than 4 liters, it belongs to the premium sedan.

Generally, the larger the displacement of the car, the greater the power, the better the acceleration performance, the more advanced the interior decoration of the car, and the higher the grade division. For example, the British Rolls-Royce sedan, the displacement has reached the liter, and the German Mercedes-Benz is new.

S-Class sedan with a displacement of more than 3 liters.