Does anyone understand the emulsion polymerization production process in the coatings industry? Come

Opening an anime store is a good choice, 1-2 people are enough to operate, and the store is about 15 square meters to rent. It's a good deal.

The total investment is about 3-40,000 yuan. At present, the competition is too fierce for coffee shops, water bar shops, etc., and it is difficult to make money comfortably.

The development of animation peripheral products is very good, and the animation industry is known as the most sunrise industry, and it is a place where young people gather.

Mainly for the crowd is 5-30 youth, teenagers, it can be seen that the post-80s are saint warriors, a furby pet baby sells for hundreds of yuan, and the post-90s are happy gray wolves, at that time it is our country's own animation, its own products, the potential is infinite.

This industry is gradually being accepted by everyone.

I would like to briefly introduce you to the animation chain enterprises on Animation Avenue, which are one of the few formal enterprises in the animation industry that operate a diversified range of products and local activities. It can also help plan decoration design, products should be put on the shelves in season, and off the shelves in season. Every month, according to the location of the store, the sales ability of employees, the profit is still relatively considerable.

Animation stores are not profiteering, this is a fact, but there are few people who open them, the investment is low, and the industry circle is to sell goods first and then settle the payment, and adopt the "liquid goods system", which is very low-risk.

Hope mine, you can refer to.

**Paint in today's real estate heating situation, paint is profitable, of course, the choice of a good brand is undoubted, pay more attention to whether there is store decoration support, promotion support advertising and other advantages, it is recommended to understand Zhuang Dian paint, in addition to these advantages and brand upgrades, to bring a lot of benefits to dealers.

**Anything is fine, the key is that you have your own drainage methods and skills, otherwise it will be difficult to place an order.

It depends on what kind of all-natural harmless kind you are

What is the approximate annual output? According to different output, the equipment is different.

Specific equipment can be divided into two types:

1.Complete sets of equipment: reactors, pipelines, platforms, and auxiliary tanks are requiredSingle equipment: sand mill, mixer, etc.

In the second case, the cost can be slightly lower.

Needless to say, when the factory and workers arrive, we must prepare for these:

1. The more operating funds, the better.

2. Qualified paint formula, don't play without this thing, of course, you can also hire a senior engineer 3. Sufficient raw material resources, to be stable, not swaying.

4. Sufficient equipment.

5. Legal procedures.

With these can be produced!

It is also needed: 1. The marketing team, at least an experienced coating professional sales staff should lead it, otherwise it is useless to produce it and sell it.

2. Packaging design and canning factory contact.

3. Data design.

4. Sales policy setting.

5. Submit the inspection report to the Quality Supervision Bureau.

The investment in plant equipment is simple, and the procedures are troublesome in environmental protection.

It takes about 30-500,000 yuan to open a paint factory, depending on the scale, the process of opening a paint factory is as follows

1. Licenses for the establishment of the company (industrial and commercial business license, tax registration certificate, etc.) 2. Factory, land, land-related licenses (land use certificate, etc.) 3. Before construction, it is necessary to find a design institute to make a feasibility study report, and then go to the first to go through the project approval procedures (economic and information bureau or ***), and then entrust a qualified unit to do environmental assessment, safety assessment, job assessment, and expert review.

4. After completing the above, find the design institute to come out with the preliminary design and pass the review (including fire protection design review) 5. The design institute will issue the construction drawings.

6. Find the construction unit and construct according to the drawings.

7. After the construction is completed, the trial production (environmental protection bureau trial production application, etc.) 8. Fire protection acceptance.

9. During the trial production period, environmental protection acceptance, safety assessment acceptance, job evaluation acceptance 10, and safety production license are obtained.

11. Officially put into production.

Dude, how's the paint factory going?

Quite troublesome, are you a**?

It is very easy to start a business in the paint and coatings industry, compared to the current Chinese paint market is very large, and with the improvement of everyone's living standards, fast-moving consumer goods will soon be formed. Red apple eco-friendly paint is a good investment.

--In order to expand customers, it is necessary to grasp the needs of consumers.

If it is a brand, there should be not much investment, and the red apple paint also has guaranteed performance, which can reduce the risk ---

By the way, Red Apple Paint & Coatings will also set up advertisements in your local area to help you expand.

About 200,000 yuan upfront investment, additives, machines. Wait a minute.

Are you **? Is there a trademark?

The products of the paint factory are mainly the interior wall and the exterior wall, the interior wall is putty powder from the bottom, and latex paint is the majority, the exterior wall has latex paint, real stone paint, water in water, water in sand, if you want to do a small one, it is recommended that the investment should not exceed 200,000 yuan, excluding the factory, the equipment is enough, so that it is convenient to return funds, the equipment can be about 100,000 yuan, putty powder belongs to dry powder products, with A8 type non-weighing putty powder mixer, it can produce 10-50 tons a day, small paint factory is enough, Interior and exterior wall latex paint with Z-1000 latex paint high-speed dispersing machine, a day can also produce about 8 tons of latex paint, if it is real stone paint, it is recommended to use Q7 real stone paint mixer, 5 tons can basically meet the initial engineering needs. The above is relatively simple and practical, the key to the paint factory is to sell and return funds, which is the key to pay attention to.

The general necessary equipment of the coating plant includes horizontal sand mill, high-speed disperser, pulping tank, paint mixing tank, vacuum suction system, liquid meter, semi-automatic filling machine, pipeline fittings, instruments and so on. It is better to buy a complete set of equipment.

Fucai is constantly transforming and innovating, and the formula of the performance in the color matching software is constantly updated.

Please adopt it in time o( o thank you.)

The emulsion is the main film-forming substance, and the copolymerization reaction of acrylic acid is formed. Generally, it is distinguished by the composition of polymerization, such as styrene acrylic emulsion, which is the product of copolymerization of styrene and acrylate monomer and some additives. Pure acrylic emulsion is an emulsion made of a variety of acrylic acid, methacrylic acid, methyl methacrylate, acrylates and functional additives.

Wait a minute. I beat my hands so hard that I haven't scored yet

The emulsion in the coating is a polymer synthetic resin emulsion as the main film-forming substance.

In China, people are accustomed to use synthetic resin emulsion as the base material, water as the dispersion medium, adding pigments, fillers (also known as physique pigments) and additives, and the coatings made by a certain process are called latex paints, also known as latex coatings.

Synthetic resin is a polymer compound, which is produced by combining low-molecular raw material monomers (such as ethylene, propylene, vinyl chloride, etc.) into macromolecules through polymerization reaction. The commonly used polymerization methods in industry include bulk polymerization, suspension polymerization, emulsion polymerization, solution polymerization, slurry polymerization, gas phase polymerization, etc. The raw materials for the production of synthetic resins are abundant, and most of them are mainly oil and natural gas products, such as ethylene, propylene, benzene, formaldehyde and urea.