Problems with the installation of filtration and oxygen rods in fish tanks

Your tank is smaller, with a little more fish, and you need to strengthen the filtration. If you don't plant aquatic plants in the tank, buy an upper filter directly in the aquarium store, which is not expensive and easy to clean, and because the upper filter has a large air contact surface, the water inlet will impact the water surface and bring in air, so there is a partial aeration function, which can save the money of buying an air pump. If you want a small beauty point of view.

You can also consider buying a wall-mounted waterfall filter.

Pothos, in the case of pothos, has no effect on fish, it is not a real aquatic weed. Most of the roots are in the water. It is well placed and has a bit of a beautifying effect.

Nitrifying bacteria can decompose some toxins in water and clean water. However, the natural production of nitrifying bacteria requires suitable conditions and a long period of time, so artificial addition of nitrifying bacteria is generally considered. Nitrifying bacteria mainly multiply and grow on filter materials such as filter cotton and ceramic rings, so the cultivation of nitrifying bacteria needs to be filtered 24 hours a day.

After each cleaning of the filter, consider supplementing with nitrifying bacteria.

If you only raise fish, add a warming rod, so that the most basic conditions are reached. Other devices are added depending on your needs.

In addition, most tropical fish prefer weakly acidic soft water, so don't put too many shells, corals, and stones in the water, which will cause the water to be weakly alkaline and hard, unless your local water is more acidic and too hard.

It's too small for a tank with a lot of fish.

Insufficient oxygen and bad drainage.

Consider adding more oxygen to a larger filtration system.

As for**In terms of model, I can't introduce too many brands, **high and low, the gap is too big, you can choose.

According to your financial resources and the number of fish to be raised.

I think you should consider that the waterfall is a filter, filter accessories, cotton yarn, etc., can be reused, and you can wash it, continue to use the waterfall filter, and you can also bring some oxygenation function.

It's more affordable **It's also appropriate Remember to change the water frequently Because there are more fish 3 days to release 1/3 of the fish tank for new water.

Because fish also need minerals in the water, etc.

Change more, the fish will die, or push the color, easy to get sick, the light should be kept 3 hours a day, otherwise you will get sick and push the color.

Floating things are not well filtered There are microorganisms in the water It is recommended to clean the tank and disinfect it with potassium permanganate.

It is best to soak for a day to remove bacteria, mold, etc.

After changing the water, putting some sea salt to disinfect can also suppress changes in water quality.

Raising fish is a hobby that costs money, and there is no way to start raising it from a small cheap one, and slowly explore the experience.

1: If you want to keep fish for a long time, your fish tank must be replaced. Because the fish tank is too small, the water is too tumbling and the fish can't adapt to it. Therefore, it is not suitable for the installation of filtration systems and cannot be used to cultivate nitrifying bacteria.

2: If you change to a fish tank of about 50cm, just buy a top filter box, I use Songbao brand, 25 yuan a set, 25w pump.

3: Nitrifying bacteria are to be cultivated and reproduced by themselves, and if you want to save money, you can make a filter box by yourself. Put it into the glass ring, sprinkle the nitrifying bacteria as a strain, filter it for 24 hours without interruption, and survive in about 15-25 days.

Nitrifying bacteria can automatically change the water quality, so as to give the fish a good water quality environment and healthy growth - try it, it's fun --

You can install a 6W or 8W built-in submersible oxygenated sponge filter in each of the two fish tanks, ** net or flower and bird market are sold, no need to buy water pumped into the above box, it will not exceed 20 yuan, as long as the underwater sponge is cleaned, the volume is also small, because the filter has oxygen supply, so there is no longer a need for oxygen pumps. Pothos is good for fish, supplying oxygen and making the water slightly green. Your fish tank is small, so you don't need anything else.

There's a sponge filter that's perfect for the kind of environment you're talking about. But it is advisable not to feed them in large quantities. That can lead to a build-up of manure and damage the water quality.

It's not a good thing for fish. Because you have goldfish, you can't change the water often to maintain the water quality. Goldfish don't like new water and prefer old water.

Yes, this is because the fish tank filter filters the water and introduces oxygen into the tank.

The fish tank filter is a device used for water purification and oxygen supplementation in fish farming appliances, and its purpose is: to remove feces and other dirt in the water, to keep the water clear, sufficient oxygen, no harmful substances, no pollution, and suitable for the growth of the void fish.

With a good filtration device in the aquarium, you can raise the fish well and change the water less.

Filter is an indispensable device on the pipeline of conveying medium, usually installed in the pressure reducing valve, pressure relief valve, water level valve, and the inlet end equipment of other equipment of the square filter.

When it needs to be cleaned, as long as the detachable filter cartridge is taken out and reloaded after treatment, it is extremely convenient to use the Weichong noise protection.

There are several ways to increase dissolved oxygen in the water of a fish tank:

1. Aquatic plants photosynthesize to supply oxygen, and put some plants in the water to produce oxygen by themselves; Or when changing the water, we should try to fill as little water as possible, enough for these fish to swim, we can change to a larger and open basin, which can increase the amount of dissolved oxygen in the water, or can be placed in a ventilated and cool place, the effect is better, when the water temperature is high, we can use ice water bottles to cool down.

2. The circulating filtration equipment stirs the water flow to increase dissolved oxygen.

Third, the air pump oxygenation, the fish tank to supply oxygen, when the oxygen is sufficient, we have to check the water quality, if there is a problem with the water quality to replace in time, fourth, reduce the feeding density, reduce the consumption of oxygen.

There are several simple ways to increase the oxygen content of a fish tank:

1. Buy an air pump or water pump or .........Anyway, it's just a pump.

2. Stir the water in the fish tank often to make the water body in contact with the air, so as to ......3. The pipe, blowing air into the water, the principle is the same.

4. Raising some aquatic plants in the fish tank can make them photosynthesize during the day or when there is light, and provide oxygen to the fish tank.

5. Change the water frequently.

Just take the pump apart and wipe it.

The filter is an important part of the aquarium, the role is to filter out the impurities, fish excrement, fish secretions, bait, rotten branches and leaves of aquatic weeds and organic matter in the water through the filter material in the filter, so as to adjust the various indicators of the water, maintain the stability of the water quality in the aquarium, and keep the water quality in the aquarium permanently fresh and thorough, so that the aquatic plants and tropical fish live in the aquarium as if they were in the wild ecological environment.

The filter consists of a filter tank, a pump, and a filter material. The working principle is to pump the water in the aquarium into the filter tank through the pump, and the filter material in the filter tank is filtered, and the filter material leaves the harmful substances or impurities in the water in the filter tank, and the filtered water is returned to the aquarium. This is the simplest mechanical filtration process, and it is not enough to maintain the water quality in the aquarium for a long time.

This is just to rely on the small tube on the water surface to ventilate, and then blow out through the water pump, if there are no bubbles to prove that the small tube is leaking, the water is not air, try another tube, in fact, the filtration process has been oxygenated when the filter cotton and activated carbon are passed, do not care whether the pump has bubbles.

Check if the intake tube is detached or blocked.

You need to turn on the power supply to check whether the oxygen pump host has jitter, and then unplug the power supply, look at the power cord, there will be a convex or concave hole on the side of the corresponding power cord, if there is a tightening cap, it needs to be removed.

After that, connect the connector of the bathtub oxygen pump, the oxygen pump and the filter tank, tighten the screws, and then connect the water pipe with an elbow and the rain shower pipe - lead the air straw from the tank to the cylinder, and then install it, and finally we use transparent tape to fix the oxygen pump vertically on the back wall of the fish tank, and connect the power supply after fixing, if it can work normally and release oxygen, it means that the installation is complete, if it can't work normally, you need to check the installation steps again.

Precautions for use:

1. Pay attention to whether the power supply voltage is consistent with the aerator before use.

2. Be careful of water immersion, exposure to sunlight and impact to ensure normal life.

3. Do not directly immerse the aerator in water, and do not oil the air pump of the aerator.

4. When using the aerator, please place it at a position above 20cm above the water level, if it is lower than the water level of the fish tank, it is recommended that you cooperate with the check valve.

The principle of the oxygen pump is to press the air into the water, so that the oxygen in the air is in full contact with the water, so that the oxygen is integrated into the water, so as to increase the amount of dissolved oxygen in the water body, so as to ensure the growth needs of aerobic organisms. Because of its convenient and efficient use and low cost, oxygen pumps are widely used in modern fish farming.

The aeration pump does not need to be left on all day, and its use time depends on the quality of the water in the tank and the number of fish. In the case of good water quality, low number of fish and little hypoxia, the aeration pump can be turned on less or only for an hour or two in the evening. In summer, when the water temperature in the fish tank is high, the time of the aeration pump can be appropriately extended, which can prevent damage caused by the aeration pump working for too long.

In addition, it is necessary to frequently check whether there is water and debris in the plastic pipe connected to the air plate and air head on the aerator pump, and once found, it should be cleaned up in time to ensure the smooth flow of the air pipe.

There are two aspects that need to be paid attention to when purchasing:

The second item is power.

For this parameter, many people will not take it for granted. But a significant part of the population, whether it is an oxygen pump or a submersible pump, is measured by this parameter to determine whether the pump is sufficient. However, the so-called wattage is only an indicator of energy consumption and does not represent anything.

Therefore, with the same output, the smaller the wattage product is chosen, the more electricity will be saved in future use, and the electricity bill will be smaller. For example, the output is only 5W. Under the premise of the same output, compared with other similar products in the aquarium market, the power consumption is definitely greater than 5W.

It can be seen that this is a fairly energy-efficient oxygen pump.

1. First put a long sponge at the bottom of the fish tank, install the leaking parts under it, and then fix the sponge on the card slot with the stuck parts.

2. Connect the water pump of the fish tank aerator with the long plastic pipe, remember that the filter needs to be installed, so as to avoid the slag from entering the water pump and destroying the inside of the fish tank aerator. Then connect the hose part of the oxygen nozzle and fix the oxygen nozzle upward at the bayonet.

3. Connect the elbow pipe and the oxygen nozzle, and clamp the position; Then connect the elbow pipe and the water filter pipe together, there is a row of small holes on the water filter pipe, and the small holes should be facing downward.

4. Now connect the power plug of the fish tank aerator to the socket, add enough water to the fish tank, and then turn it on to see the oxygen supply effect. If the blisters don't come out well, disconnect the power supply before adjusting it.

The working principle and installation method of the fish tank aerator are introduced as above, the function of the fish tank aerator is to help the fish in the fish tank bring oxygen and avoid the death of the fish due to lack of oxygen. If there are fish in the fish tank, the fish tank aerator needs to be turned on all the time, and if the fish tank aerator is not open, its role cannot be fully played.

The working principle of the fish tank aerator is the same as that of the aeration pump used in the industry, that is, by pressing air into the water, the oxygen enters the water. Because when the air is in full contact with the water, the oxygen molecules will melt into the water, so that the amount of dissolved oxygen increases, so that the fish in the water can be better produced.

The power of the fish tank aerator is much smaller than that of an industrial aeration pump, and the intense water pressure caused by too much power can injure the fish and plants in the water. So we see that the fish tank aerator in the fish tank is spitting out strings of small bubbles. Although the fish tank aerator has a small power, it has a very large effect, and it is very difficult to raise fish without it.

LZ this is a 3-in-1 pump, not an aeration pump, LZ has to be installed in a different direction, and LZ you should change the water.

Yes, yes, but it's time for you to change the water.

It will be good to raise the water pump placement point: when the fish tank is too high, the water pump is placed very low, and there is no oxygen, most of which is improper setting or maintenance.

The intake pipe is blocked, the function of the aerator and the air pump is the same, both are used for oxygenation, and the filter is used to circulate and filter water. If the fish tank is large, it is best to use a separate air pump with oxygenation. In fact, it is very simple, find a container, sealed, put it on the top of the fish tank, connect the bottom of the container to the fish tank, and put the head of the pipe on the water surface a little down, so that as long as the water level is lower than the nozzle, the water in the container above the fish tank will automatically fill the fish tank, and it will automatically stop after the water level reaches a certain height.

If you don't understand this principle, it doesn't matter, go home and fill a Coke bottle with water, and then stand upside down, don't leave the water at the mouth of the bottle, and the other place is out of the water, and you will find that as long as the mouth of the bottle is out of the water, the water in the bottle will automatically stay in the tank, but you just put the mouth of the bottle back into the water, and he will stop.

The filtration is on for 24 hours, and the oxygen can not be turned on, (the filtered water has the effect of bringing in oxygen) If you have a high density of fish farming, it is recommended that oxygen is still used when necessary. For example, the weather is hot and sultry, rainy days, and so on. Add a filter bottom plate, so that you can connect the filter bottom plate with the upper filter, and the bottom of the cylinder can be sucked clean.