There are no scratches that do not break

Dear, for the time being, there is no 100% scratch not bad tile, it depends on your strength problem, normal tiles can withstand relative tempering, now the wear-resistant brick has the highest wear coefficient: 5! The full glaze is 4!

There should be no scratches that are not broken, tiles are basically scratch-resistant, if there are scratches on the tiles, you can use the following methods to repair:

1. Wipe method: If the tile scratches are not serious, you can apply toothpaste and wipe it with a soft cloth, and the effect should be good; Use the smudge method to find some paint that is similar to the color of the tile and apply it to the tile.

2. Replacement method: If the tile scratches are more serious, you can replace it with a new tile to ensure the overall beauty of the tile. Nail polish:

Wipe with nail polish, and wipe the tiles clean before wiping, so that the effect will be better. Waxing method: It is also possible to use waxing, which can have the effect of fading tile scratches.

3. Oxalic acid repair method: The effect of using oxalic acid to repair tile scratches is good, and the specific operation method is to use a soft rag dipped in oxalic acid and wipe hard to repair tile scratches.

4. Water sandpaper: For the tile scratches are more serious, it is a hard injury, and it can only be sanded with water sandpaper, but it is not recommended to use this method, because it is very damaging to the tile.

The above four methods can be used to repair the scratches of the tile, we should usually avoid the tile scratch, once scratched, the effect after repair is not very good.

Kiss! Hello, happy to answer your <>

Pro-tile unused will not have scratches, tile surface hardness is very hard, normal tiles if there are no defects when leaving the factory, and their own patterns, there will be no scratches. Ceramic tiles, also known as tiles, are refractory metal oxides and semi-metal oxides, through the process of grinding, mixing, pressing, glazing, and sintering, and form an acid-alkali resistant porcelain or stone, etc., building or decorative materials, called ceramic tiles. Its raw materials are mostly mixed with clay, quartz sand, etc., and have high hardness.

It is mostly used for the beautification of the wall, and the cement sticking wheel is used to fit the wall. The surface of the full-body brick is not glazed, and the material and color of the front and back are the same, so it is named full-body brick. Full-body brick is a kind of wear-resistant brick, although there are varieties such as seepage bricks, but relatively speaking, the color of the full-body brick is not as good as glazed bricks.

Because the interior design is more and more inclined to plain design, so the whole brick has become more and more fashionable, the whole brick is widely used in the hall, the aisle and the outdoor walk to the ground of the decoration project, generally less used for the wall, and most of the anti-slip bricks belong to the whole brick. The common specifications of full-body bricks are 300x300mm, 300x600mm, 400x400mm, 500x500mm, 600x600mm, 800x800mm and so on. Pros:

Due to the rough surface, the wear resistance and slip resistance are the best of all ceramic tiles. Disadvantages: Its unique structure determines the texture and effect of the whole brick, and the decorative effect is poor.

Hope mine can help you <>

Do you have any other questions?